Specifications

Model ATLAS-202 ATLAS-222 ATLAS-122 ATLAS-122C ATLAS-112C

Running Speed* up to 200bpm up to 200bpm up to 250bpm up to 250bpm up to 125bpm
Bag Size Width 101.6 - 330mm 101.6 - 330mm 75 - 230mm 75 - 230mm 75 - 230mm
Length 127 - 711mm 127 - 711mm 75 - 533mm 75 - 533mm 75 - 533mm
Film Size Max. roll width 685.8mm 685.8mm 483mm 483mm 483mm
Bore of film roll core 76.2mm 76.2mm 76.2mm 76.2mm 76.2mm
Product Snack foods such as potato chips, corn chips, tortillla chips
Film Feeding Motion Continuous/Intermittent Continuous
Machine Width 990mm 990mm
Size Height 2000mm 1825mm
Length 2160mm 1780mm
Power Power Voltage** 3 phase AC200V-208V 50/60Hz
3 phase AC220V-480V (Built-in Transformers)
Supply Allowable voltage
±10%
fluctuation
Air Supply 0.5 - 1MPa (5.1 - 10.2kgf/cm2) 60N/min.
Net Weight 1300kg 1200kg
Operational Temperature 32-104ºF (0-40ºC) RH30-70% non-condensing
Options Data printer, Air nitrogen switch and solenoid assembly for Air Jet, Splicing plate film knife kit, Product poker
Sealing Jaw Motion Twin jaw D-motion Twin rotary jaw Twin rotary jaw Twin rotary jaw Single rotary jaw
*Actual maximum running speed depends on the product, product volume, packaging material and in-feed conditions.
**Other power supply available upon consultation
Note: Specifications subject to change without notice

Atlas Dimensions (mm)

ATLAS-202 ATLAS-122C 590

2370 Ishida Europe: understanding and tackling the
ATLAS-122 ATLAS-112C weighing and packing line challenges you face

MAX.490
(1100)
Combine the fastest available bagmaking speeds ATLAS-222

1265
- Unique engineering expertise, combined with practical industry
with these productivity-boosting advances 810

460
knowledge in your sector
• Highest quality seals owing to the industry’s widest choice of sealing REMOTE CONTROL UNIT

WEB
REMOTE CONTROL UNIT 352 ç≤382
- Global applications experience, including snacks, meat, poultry,

820 (JAW ROTATION CENTER)

mechanisms and Ishida’s special backseal unit
ready meals, fresh produce, dry and frozen foods, bakery,
• Better film-feed control thanks to servo-motor controlled pull down system

2105
2000
1890

1825
1800
confectionery and pasta
and unique strain-gauge load cell

910
740
775
165
• Neater, faster product insertion with Ishida weigher-bagmaker chute - R&D resources and commitment to support both continuous
410
990 1550 810 180
improvement and major innovation

160
synergy and unique bag-former geometry 560 1600 990
1210
1780

Direct Overmount Configuration Twin Bagmaker Configuration - Solutions include multihead weighers, distribution and topping
Increase operator productivity by making learning (ATLAS-122 & 122C only*) systems, snack food bagmakers, traysealers, X-ray inspection
and operation easier and faster systems, checkweighers, weigh-price-labellers, seal testers,

~
60

60
~
• Touch panel RCU offering standardised operating screens, minimum pick-and-place systems, complete lines, project management
keystroke operation, ‘no mistake’ product image registration and multi- 810
and consultancy
3940
language support
• Film splicing and film changeover now easier and faster than ever before 2145
max 250
1530
1290
1295
• CF card data management for greater data security CCW-R-214W-S/30-PB-ITPS

1900
1930
1900

1305
Pick the integrated approach that will maximise REMOTE CONTROL UNIT

Atlas

585

255
180
820 (JAW ROTATION CENTER)

4240
WEB

3900
your packing speed and yield

3650
• Combine Atlas bagmaking with Ishida weighing for optimised results and

2280
2010
2000

2075
1770
1890
single-source convenience

775

880
165
• Choose the weigher-bagmaker configuration that best meets your product 1550 410

130
990
560 1600 545 1210
*Lower speed option available 1830
and floorspace requirements
• Benefit from total integration, including seal testing and checkweighing
Snack Food
up to
Ishida Europe Limited
11 Kettles Wood Drive
Woodgate Business Park
Birmingham B32 3DB
Ishida Czech Republic
Tel: +420 317 844 059
Fax: +420 317 844 052
info@ishidaeurope.cz
Ishida France
Tel: +33 (0)1 48 63 83 83
Fax: +33 (0)1 48 63 24 29
info@ishidaeurope.fr
Ishida Germany
Tel: +49 (0)791 945 160
Fax: +49 (0)791 945 1699
info@ishida.de
Ishida Middle East
Tel: +971 (0)4 299 1933
Fax: +971 (0)4 299 1955
ishida@ishida.ae
Bagmakers
280 bpm United Kingdom
Tel: +44 (0)121 607 7700
Fax: +44 (0)121 607 7666
info@ishidaeurope.com
Ishida Netherlands
Tel: +31 (0)499 39 3675
Fax: +31 (0)499 39 1887
info@ishida.nl
Ishida Romania
Tel: +40 (0)21 300 15 16
Fax: +40 (0)31 710 70 57
info@ishidaeurope.ro
Ishida South Africa
Tel: +27 (0)11 976 2010
Fax: +27 (0)11 976 2012
ishidasales@ishida.co.za
Ishida Switzerland
Tel: +41 (0)41 799 7999
Fax: +41 (0)41 790 3927
info@ishida.ch
Highest speeds, maximum productivity

www.ishidaeurope.com
www.ishidaeurope.com
(E) ATLAS 05.09
Atlas Snack Food Bagmakers

Increase operator productivity with easier and Choose the integrated approach that maximises
The advanced features Dancer roller unit

faster learning and operation your packing speed and yield

behind Atlas productivity
An interface that really communicates Combine with Ishida weighing for optimised results and single-source
• Touch-panel RCU with highly visual, icon-based screens convenience
Weigher-bagmaker chute synergy
Weigher discharge chute and bagmaker entry • Standardised Ishida operating screens make learning simpler Ishida offers a fully integrated, single-manufacturer multihead weigher and
• Tab system eases navigation from one screen to another bagmaker combinations for snacks. Years of experience with both machines
funnel are designed and made by a single
have enabled Ishida to optimise the physical and electronic interfaces to
manufacturer (Ishida) based on extensive • Packs can be photographed and colour images stored to
enhance speed and reduce weighment spread. Equally important, one
experience. Product flow across the interface is ensure correct settings/presets are chosen
company takes full responsibility for the performance of the combination.
optimised for speed and smoothness. • Multi-language support to accommodate most operators
Choose the weigher-bagmaker configuration that best meets your product
Film splicing and changeovers made simpler
and floorspace requirements
Bag-former geometry
• A special plate captures and holds the film for splicing, saving Atlas Snack Bagmakers can be deployed in two different configurations
Original shape plus N2 gas flushing system time and giving more consistent results
(see below). In a direct overmount setup, each bagmaker has a weigher
prevent product from being blown upward, • During changeovers, the new film is automatically centred once Touch-panel RCU
mounted directly on top of it. In a twin-bagmaker configuration, one weigher
ensuring even product charging. the bag width is entered on the RCU
serves two bagmakers, designed to sit together as a compact unit.
• No need to input the new bag length: Atlas automatically
calculates it, using the regmark sensor A new development is the Ishida R-218WB, an oval multihead weigher designed
specifically for this purpose, delivering very high packing speeds (see right). The revolutionary geometry of the new
R-218 multihead weigher helps to
Servo motor-controlled vacuum pull-down belt Simple, secure data management
minimise the spread of each weighment
Benefit from total integration, including seal testing and checkweighing
Enables precise film feeding, even at high speed. Backup and interchange of data is easy and secure, using that enters either bagmaker, while
achieving speeds of up to 280 wpm.
CF (CompactFlash) cards The benefits of single-manufacturer sourcing can be extended to provide
complete integrated packing lines, including seal checkers and checkweighers.
Backseal unit A single touchscreen makes it fast and easy to change settings and presets for
a whole line. Metal detectors and printers can also be integrated.
Rotating hot steel band, synchronised exactly
with film speed, delivers the world’s smoothest
vertical seal, which is instantly cooled by an air Film splicing
Direct-overmount ITPS Twin ITPS
blower. Complete integrity assured for both fin
and lap seals. Multihead weigher Multihead weigher
+ +
Strain gauge load cell Bagmaker Bagmaker Bagmaker
Ishida stripping device Provides real-time detection of the load applied by the film to + +
Clears product from the area where the sealing the dancer rollers. Automatically controls the film feed rate to Seal checker Seal checker Seal checker
jaws will meet the film, ensuring an intact seal maintain constant film tension, helping to avoid film breakage + +
and dramatically reducing pack waste at high and assure pack quality.
Checkweigher Checkweigher Checkweigher
speeds.
Sealing mechanism (unique choice)
Choose rotary jaw motion, with long lasting ceramic knife*, for highest
possible speeds. Choose D-motion for longer sealing time (thicker film)
Easy and secure data backup
and adjustable bag inflation.

*The Ishida Ceramic Knife sharply reduces bagmaker maintenance. Blade life, as demonstrated on customer sites, has been at least
two years. This contrasts with conventional bag-cutting mechanisms, which need changing every 10 weeks.