Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 10 views

    RCDS

    Uploaded by

    Krishnan Greeshma
    The document describes a Releasing Circuit Disable Switch that meets NFPA standards and disconnects fire suppression release circuits. It has LED indicators, mounts in a single gang box, and connects to a fire alarm panel for supervision. Installation and operation instructions are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    RCDS

    Uploaded by

    Krishnan Greeshma
    10 views2 pages
    The document describes a Releasing Circuit Disable Switch that meets NFPA standards and disconnects fire suppression release circuits. It has LED indicators, mounts in a single gang box, and connects to a fire alarm panel for supervision. Installation and operation instructions are provided.

    Original Title

    5401214_RCDS

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a Releasing Circuit Disable Switch that meets NFPA standards and disconnects fire suppression release circuits. It has LED indicators, mounts in a single gang box, and connects to a fire alarm panel for supervision. Installation and operation instructions are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    10 views2 pages

    RCDS

    Uploaded by

    Krishnan Greeshma
    The document describes a Releasing Circuit Disable Switch that meets NFPA standards and disconnects fire suppression release circuits. It has LED indicators, mounts in a single gang box, and connects to a fire alarm panel for supervision. Installation and operation instructions are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    RCDS SERIES

    Releasing Circuit Disable Switch

    Features
    • Meets requirements of NFPA 72 and 2001
    • Colored LEDs indicate system status
    • Stainless steel plate mounts to single gang box
    • RCDS-1: key removable in both positions
    • RCDS-2001: key only removable in enabled position to comply
    with NFPA 2001
    • Compatible with any 24VDC system

    Description Technical Specifications


    The device consists of a stainless steel faceplate, green LED, amber
    2 3/4” W x 4-1/2” H x 2” D (Approximate)
    LED, and a switch assembly. It is designed to mount on a standard Dimensions
    Mounts on single gang or handy box
    single gang electrical enclosure.
    Contact Rating 1 AMP @ 40 VDC
    Application Power 24 VDC, 10mA
    Requirements
    The RCDS-1 complies with the requirements of NFPA 72 (National
    Fire Alarm and Signaling Code): Indoor use only
    Environmental Temperature range -22°F to140°F
    Specifications
    The RCDS-2001 complies with the requirements of NFPA 2001 (-30°C to 60°C)
    (Standard on Clean Agent Fire Extinguishing Systems):
    • Specifying a physical switch to disconnect the release circuit in
    place of a software controlled disconnect.
    • Creating a supervisory condition on the associated release panel.

    Potter Electric Signal Company, LLC • St. Louis, MO • Phone: 800-325-3936 • www.pottersignal.com

    5401214 - REV F • 10/17 PAGE 1 OF 2


    RCDS SERIES
    Releasing Circuit Disable Switch

    Installation
    1. Connect the red and black leads to the 24 VDC auxiliary power terminals on the release panel. Be certain to observe polarity.
    2. Connect the yellow wires to the supervisory zone on the panel.

    RED
    BLACK
    YELLOW
    YELLOW
    ORANGE

    ORANGE

    Operation
    The green LED indicates the RCDS is in the Normal condition and
    the release circuit is enabled. The connection for the supervisory circuit has 4 wires: 2 yellow and
    The amber LED indicates that the release circuit is disabled. 2 gray. The 2 yellow wires are for connection to the supervisory
    circuit. The 2 gray wires are for connection to additional
    supervisory devices or the EOLR for the supervisory zone.
    Ordering Information
    Model Description Stock No.
    RCDS-1 Releasing Circuit Disable Switch 3001002
    Releasing Circuit Disable Switch
    RCDS-2001 3001005
    (Clean Agent)

    Potter Electric Signal Company, LLC • St. Louis, MO • Phone: 800-325-3936 • www.pottersignal.com

    5401214 - REV F • 10/17 PAGE 2 OF 2

    You might also like