-
Integrating van der Waals materials on paper substrates for electrical and optical applications
Authors:
Wenliang Zhang,
Qinghua Zhao,
Carmen Munuera,
Martin Lee,
Eduardo Flores,
João E. F. Rodrigues,
Jose R. Ares,
Carlos Sanchez,
Javier Gainza,
Herre S. J. van der Zant,
José A. Alonso,
Isabel J. Ferrer,
Tao Wang,
Riccardo Frisenda,
Andres Castellanos-Gomez
Abstract:
Paper holds the promise to replace silicon substrates in applications like internet of things or disposable electronics that require ultra-low-cost electronic components and an environmentally friendly electronic waste management. In the last years, spurred by the abovementioned properties of paper as a substrate and the exceptional electronic, mechanical and optical properties of van der Waals (v…
▽ More
Paper holds the promise to replace silicon substrates in applications like internet of things or disposable electronics that require ultra-low-cost electronic components and an environmentally friendly electronic waste management. In the last years, spurred by the abovementioned properties of paper as a substrate and the exceptional electronic, mechanical and optical properties of van der Waals (vdW) materials, many research groups have worked towards the integration of vdW materials-based devices on paper. Recently, a method to deposit a continuous film of densely packed interconnects of vdW materials on paper by simply rubbing the vdW crystals against the rough surface of paper has been presented. This method utilizes the weak interlayer vdW interactions and allows cleaving of the crystals into micro platelets through the abrasion against the paper. Here, we aim to illustrate the general character and the potential of this technique by fabricating films of 39 different vdW materials (including superconductors, semi-metals, semiconductors, and insulators) on standard copier paper. We have thoroughly characterized their optical properties showing their high optical quality: one can easily resolve the absorption band edge of semiconducting vdW materials and even the excitonic features present in some vdW materials with high exciton binding energy. We also measured the electrical resistivity for several vdW materials films on paper finding exceptionally low values, which are in some cases, orders of magnitude lower than those reported for analogous films produced by inkjet printing. We finally demonstrate the fabrication of field-effect devices with vdW materials on paper using the paper substrate as an ionic gate.
△ Less
Submitted 7 May, 2021;
originally announced May 2021.
-
Tunable Photodetectors via in situ Thermal Conversion of TiS$_3$ to TiO$_2$
Authors:
Foad Ghasemi,
Riccardo Frisenda,
Eduardo Flores,
Nikos Papadopoulos,
Robert Biele,
David Perez de Lara,
Herre S. J. van der Zant,
Kenji Watanabe,
Takashi Taniguchi,
Roberto D'Agosta,
Jose R. Ares,
Carlos Sánchez,
Isabel J. Ferrer,
Andres Castellanos-Gomez
Abstract:
In two-dimensional materials research, oxidation is usually considered as a common source for the degradation of electronic and optoelectronic devices or even device failure. However, in some cases a controlled oxidation can open the possibility to widely tune the band structure of 2D materials. In particular, we demonstrate the controlled oxidation of titanium trisulfide (TiS$_3$), a layered semi…
▽ More
In two-dimensional materials research, oxidation is usually considered as a common source for the degradation of electronic and optoelectronic devices or even device failure. However, in some cases a controlled oxidation can open the possibility to widely tune the band structure of 2D materials. In particular, we demonstrate the controlled oxidation of titanium trisulfide (TiS$_3$), a layered semiconductor that has attracted much attention recently thanks to its quasi-1D electronic and optoelectronic properties and its direct bandgap of 1.1 eV. Heating TiS$_3$ in air above 300 °C gradually converts it into TiO$_2$, a semiconductor with a wide bandgap of 3.2 eV with ap-plications in photo-electrochemistry and catalysis. In this work, we investigate the controlled thermal oxidation of individual TiS$_3$ nanoribbons and its influence on the optoelectronic properties of TiS$_3$-based photodetectors. We observe a step-wise change in the cut-off wavelength from its pristine value ~1000 nm to 450 nm after subjecting the TiS$_3$ devices to subsequent thermal treatment cycles. Ab-initio and many-body calculations confirm an increase in the bandgap of titanium oxysulfide (TiO$_{2-x}$S$_x$) when increasing the amount of oxygen and reducing the amount of sulfur.
△ Less
Submitted 11 June, 2020;
originally announced June 2020.
-
Polarization-sensitive and broadband photodetection based on a mixed-dimensionality TiS3/Si p-n junction
Authors:
Yue Niu,
Riccardo Frisenda,
Eduardo Flores,
Jose R. Ares,
Weicheng Jiao,
David Perez de Lara,
Carlos Sanchez,
Rongguo Wang,
Isabel J. Ferrer,
Andres Castellanos-Gomez
Abstract:
The capability to detect the polarization state of light is crucial in many day-life applications and scientific disciplines. Novel anisotropic two-dimensional materials such as TiS3 combine polarization sensitivity, given by the in-plane optical anisotropy, with excellent electrical properties. Here we demonstrate the fabrication of a monolithic polarization sensitive broadband photodetector base…
▽ More
The capability to detect the polarization state of light is crucial in many day-life applications and scientific disciplines. Novel anisotropic two-dimensional materials such as TiS3 combine polarization sensitivity, given by the in-plane optical anisotropy, with excellent electrical properties. Here we demonstrate the fabrication of a monolithic polarization sensitive broadband photodetector based on a mixed-dimensionality TiS3/Si p-n junction. The fabricated devices show broadband responsivity up to 1050 nm, a strong sensitivity to linearly polarized illumination with difference between the two orthogonal polarization states up to 350 % and a good detectivity and fast response time. The discussed devices can be used as building blocks to fabricate more complex polarization sensitive systems such as polarimeters.
△ Less
Submitted 22 September, 2020; v1 submitted 27 March, 2019;
originally announced March 2019.
-
Biological plausibility and stochasticity in scalable VO2 active memristor neurons
Authors:
Wei Yi,
Kenneth K. Tsang,
Stephen K. Lam,
Xiwei Bai,
Jack A. Crowell,
Elias A. Flores
Abstract:
Neuromorphic networks of artificial neurons and synapses can solve computational hard problems with energy efficiencies unattainable for von Neumann architectures. For image processing, silicon neuromorphic processors outperform graphic processing units (GPUs) in energy efficiency by a large margin, but they deliver much lower chip-scale throughput. The performance-efficiency dilemma for silicon p…
▽ More
Neuromorphic networks of artificial neurons and synapses can solve computational hard problems with energy efficiencies unattainable for von Neumann architectures. For image processing, silicon neuromorphic processors outperform graphic processing units (GPUs) in energy efficiency by a large margin, but they deliver much lower chip-scale throughput. The performance-efficiency dilemma for silicon processors may not be overcome by Moore's law scaling of complementary metal-oxide-semiconductor (CMOS) field-effect transistors. Scalable and biomimetic active memristor neurons and passive memristor synapses form a self-sufficient basis for a transistorless neural network. However, previous demonstrations of memristor neurons only showed simple integrate-and-fire (I&F) behaviors and did not reveal the rich dynamics and computational complexity of biological neurons. Here we show that neurons built with nanoscale vanadium dioxide active memristors possess all three classes of excitability and most of the known biological neuronal dynamics, and are intrinsically stochastic. With the favorable size and power scaling, there is a path toward an all-memristor neuromorphic cortical computer.
△ Less
Submitted 20 September, 2018;
originally announced September 2018.
-
Light: Particle & Wave
Authors:
Eduardo V. Flores,
Jeffrey Scaturro
Abstract:
Light displays particle and wave properties within the bounds of the inequality, K^2+V^2<=1, where K represents particle information and V represents corresponding wave information. Using two laser beams that cross and then diverge from each other we explore the inequality. Results, based on semiclassical analysis, are in conflict with the inequality. However, analysis based on quantum electrodyna…
▽ More
Light displays particle and wave properties within the bounds of the inequality, K^2+V^2<=1, where K represents particle information and V represents corresponding wave information. Using two laser beams that cross and then diverge from each other we explore the inequality. Results, based on semiclassical analysis, are in conflict with the inequality. However, analysis based on quantum electrodynamics resolves the conflict and uncovers a region where particle and wave aspects of light develop independently. Independent development of wave and particle aspects implies that they represent separate realities.
△ Less
Submitted 12 March, 2018; v1 submitted 2 December, 2014;
originally announced December 2014.
-
A model that solves to the wave-particle duality paradox
Authors:
Eduardo V. Flores
Abstract:
Bohmian mechanics solves the wave-particle duality paradox by introducing the concept of a physical particle that is always point-like and a separate wavefunction with some sort of physical reality. However, this model has not been satisfactorily extended to relativistic levels. Here we introduce a model of permanent point-like particles that works at any energy level. Our model seems to have the…
▽ More
Bohmian mechanics solves the wave-particle duality paradox by introducing the concept of a physical particle that is always point-like and a separate wavefunction with some sort of physical reality. However, this model has not been satisfactorily extended to relativistic levels. Here we introduce a model of permanent point-like particles that works at any energy level. Our model seems to have the benefits of Bohmian mechanics without its shortcomings. We propose an experiment for which the standard interpretation of quantum mechanics and our model make different predictions.
△ Less
Submitted 13 October, 2014;
originally announced October 2014.
-
Mapping of solutions of the Hamilton-Jacobi equation by an arbitrary canonical transformation
Authors:
G. F. Torres del Castillo,
H. H. Cruz Domínguez,
A. de Yta Hernández,
J. E. Herrera Flores,
A. Sierra Martínez
Abstract:
It is shown that given an arbitrary canonical transformation and an arbitrary Hamiltonian, there is a naturally defined mapping that sends any solution of the Hamilton-Jacobi (HJ) equation into a solution of the HJ equation corresponding to the new Hamiltonian
It is shown that given an arbitrary canonical transformation and an arbitrary Hamiltonian, there is a naturally defined mapping that sends any solution of the Hamilton-Jacobi (HJ) equation into a solution of the HJ equation corresponding to the new Hamiltonian
△ Less
Submitted 19 March, 2014;
originally announced March 2014.
-
Update on the MiniCLEAN Dark Matter Experiment
Authors:
K. Rielage,
M. Akashi-Ronquest,
M. Bodmer,
R. Bourque,
B. Buck,
A. Butcher,
T. Caldwell,
Y. Chen,
K. Coakley,
E. Flores,
J. A. Formaggio,
D. Gastler,
F. Giuliani,
M. Gold,
E. Grace,
J. Griego,
N. Guerrero,
V. Guiseppe,
R. Henning,
A. Hime,
S. Jaditz,
C. Kachulis,
E. Kearns,
J. Kelsey,
J. R. Klein
, et al. (21 additional authors not shown)
Abstract:
The direct search for dark matter is entering a period of increased sensitivity to the hypothetical Weakly Interacting Massive Particle (WIMP). One such technology that is being examined is a scintillation only noble liquid experiment, MiniCLEAN. MiniCLEAN utilizes over 500 kg of liquid cryogen to detect nuclear recoils from WIMP dark matter and serves as a demonstration for a future detector of o…
▽ More
The direct search for dark matter is entering a period of increased sensitivity to the hypothetical Weakly Interacting Massive Particle (WIMP). One such technology that is being examined is a scintillation only noble liquid experiment, MiniCLEAN. MiniCLEAN utilizes over 500 kg of liquid cryogen to detect nuclear recoils from WIMP dark matter and serves as a demonstration for a future detector of order 50 to 100 tonnes. The liquid cryogen is interchangeable between argon and neon to study the A$^{2}$ dependence of the potential signal and examine backgrounds. MiniCLEAN utilizes a unique modular design with spherical geometry to maximize the light yield using cold photomultiplier tubes in a single-phase detector. Pulse shape discrimination techniques are used to separate nuclear recoil signals from electron recoil backgrounds. MiniCLEAN will be spiked with additional $^{39}$Ar to demonstrate the effective reach of the pulse shape discrimination capability. Assembly of the experiment is underway at SNOLAB and an update on the project is given.
△ Less
Submitted 19 March, 2014;
originally announced March 2014.
-
SuperB Technical Design Report
Authors:
SuperB Collaboration,
M. Baszczyk,
P. Dorosz,
J. Kolodziej,
W. Kucewicz,
M. Sapor,
A. Jeremie,
E. Grauges Pous,
G. E. Bruno,
G. De Robertis,
D. Diacono,
G. Donvito,
P. Fusco,
F. Gargano,
F. Giordano,
F. Loddo,
F. Loparco,
G. P. Maggi,
V. Manzari,
M. N. Mazziotta,
E. Nappi,
A. Palano,
B. Santeramo,
I. Sgura,
L. Silvestris
, et al. (384 additional authors not shown)
Abstract:
In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/ch…
▽ More
In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/charm production threshold with a luminosity of 10^{35} cm^{-2}s^{-1}. This high luminosity, producing a data sample about a factor 100 larger than present B Factories, would allow investigation of new physics effects in rare decays, CP Violation and Lepton Flavour Violation. This document details the detector design presented in the Conceptual Design Report (CDR) in 2007. The R&D and engineering studies performed to arrive at the full detector design are described, and an updated cost estimate is presented.
A combination of a more realistic cost estimates and the unavailability of funds due of the global economic climate led to a formal cancelation of the project on Nov 27, 2012.
△ Less
Submitted 24 June, 2013;
originally announced June 2013.
-
Diffraction of Coherent Light with Sinusoidal Amplitude by a Thin-Slit Grid
Authors:
Robert Buonpastore,
Ernst Knoesel,
Eduardo Flores
Abstract:
We report on the experimental findings of a thin-slit grid diffraction of a coherent light beam with sinusoidal amplitude. We create the sinusoidal amplitude by placing a thin-slit grid at the center of the dark fringes of an interference pattern resulting from laser light passing through a dual pinhole. The experimental results show good agreement with diffraction calculations of a thin-slit gr…
▽ More
We report on the experimental findings of a thin-slit grid diffraction of a coherent light beam with sinusoidal amplitude. We create the sinusoidal amplitude by placing a thin-slit grid at the center of the dark fringes of an interference pattern resulting from laser light passing through a dual pinhole. The experimental results show good agreement with diffraction calculations of a thin-slit grid placed at the center of the dark fringes produced by two coherent beams that intersect at small angle. The results are applied to wire-grid diffraction in the Afshar experiment.
△ Less
Submitted 2 May, 2008;
originally announced May 2008.
-
Symmetric energy-momentum tensor in Maxwell, Yang-Mills, and Proca theories obtained using only Noether's theorem
Authors:
Merced Montesinos,
Ernesto Flores
Abstract:
The symmetric and gauge-invariant energy-momentum tensors for source-free Maxwell and Yang-Mills theories are obtained by means of translations in spacetime via a systematic implementation of Noether's theorem. For the source-free neutral Proca field, the same procedure yields also the symmetric energy-momentum tensor. In all cases, the key point to get the right expressions for the energy-momen…
▽ More
The symmetric and gauge-invariant energy-momentum tensors for source-free Maxwell and Yang-Mills theories are obtained by means of translations in spacetime via a systematic implementation of Noether's theorem. For the source-free neutral Proca field, the same procedure yields also the symmetric energy-momentum tensor. In all cases, the key point to get the right expressions for the energy-momentum tensors is the appropriate handling of their equations of motion and the Bianchi identities. It must be stressed that these results are obtained without using Belinfante's symmetrization techniques which are usually employed to this end.
△ Less
Submitted 19 February, 2006;
originally announced February 2006.
