Showing 1–28 of 28 results for author: Kelsey, J

The sPHENIX Micromegas Outer Tracker

Authors: S. Aune, B. Azmoun, A. Bonenfant, S. Boose, M. Bregant, D. Cacace, R. W. da Silva, R. Feder, A. Francisco, C. Goblin, A. Grabas, J. S. Haggerty, R. A. Hernandez, H. D. H. Herrera, J. Huang, J. Kelsey, I. Kotov, J. Kuczewski, I. Mandjavidze, T. A. Martins, J. Mead, J. Mills, A. Oskarsson, H. Pereira Da Costa, C. Pinkenburg , et al. (15 additional authors not shown)

Abstract: The sPHENIX Time Projection Chamber Outer Tracker (TPOT) is a Micromegas based detector. It is a part of the sPHENIX experiment that aims to facilitate the calibration of the Time Projection Chamber, in particular the correction of the time-averaged and beam-induced distortions of the electron drift. This paper describes the detector mission, setup, construction, installation, commissioning and pe… ▽ More The sPHENIX Time Projection Chamber Outer Tracker (TPOT) is a Micromegas based detector. It is a part of the sPHENIX experiment that aims to facilitate the calibration of the Time Projection Chamber, in particular the correction of the time-averaged and beam-induced distortions of the electron drift. This paper describes the detector mission, setup, construction, installation, commissioning and performance during the first year of sPHENIX data taking. △ Less

Submitted 26 July, 2024; v1 submitted 20 March, 2024; originally announced March 2024.

Comments: 35 pages, 36 figures

Journal ref: Nuclear Instruments and Methods in Physics Research A 1066 (2024) 169615

Two-Photon EXchange -- TPEX

Authors: R. Alarcon, R. Beck, J. C. Bernauer, M. Broering, E. Cline, B. Dongwi, I. Fernando, M. Finger, M. Finger Jr., I. Friščić, T. Gautam, D. K. Hasell, O. Hen, J. Holmes, T. Horn, E. Ihloff, R. Johnston, J. Kelsey, M. Kohl, T. Kutz, I. Lavrukhin, S. Lee, W. Lorenzon, F. Maas, H. Merkel , et al. (12 additional authors not shown)

Abstract: We propose a new measurement of the ratio of positron-proton to electron-proton, elastic scattering at DESY to determine the contributions beyond single-photon exchange, which are essential to the QED description of the most fundamental process in hadronic physics. A 20~cm long liquid hydrogen target together with the extracted beam from the DESY synchrotron would yield an average luminosity of… ▽ More We propose a new measurement of the ratio of positron-proton to electron-proton, elastic scattering at DESY to determine the contributions beyond single-photon exchange, which are essential to the QED description of the most fundamental process in hadronic physics. A 20~cm long liquid hydrogen target together with the extracted beam from the DESY synchrotron would yield an average luminosity of $2.12\times10^{35}$~cm$^{-2}\cdot$s$^{-1}\cdot$sr$^{-1}$ ($\sim200$ times the luminosity achieved by OLYMPUS). A commissioning run at 2 GeV followed by measurements at 3 GeV would provide new data up to $Q^2=4.6$~(GeV/$c$)$^2$ (twice the range of current measurements). Lead tungstate calorimeters would be used to detect the scattered leptons at polar angles of $30^\circ$, $50^\circ$, $70^\circ$, $90^\circ$, and $110^\circ$. The measurements could be scheduled to not interfere with the operation of PETRA. We present rate estimates and simulations for the planned measurements including background considerations. Initial measurements at the DESY test beam facility using prototype lead tungstate calorimeters in 2019, 2021, and 2022 were made to check the Monte Carlo simulations and the performance of the calorimeters. These tests also investigated different readout schemes (triggered and streaming). Various upgrades are possible to shorten the running time and to make higher beam energies and thus greater $Q^2$ ranges accessible. △ Less

Submitted 11 January, 2023; originally announced January 2023.

Comments: 45 pages, 43 figures, submitted to the DESY PRC

Searching for New Physics with DarkLight at the ARIEL Electron-Linac

Authors: The DarkLight Collaboration, E. Cline, R. Corliss, J. C. Bernauer, R. Alarcon, R. Baartman, S. Benson, J. Bessuille, D. Ciarniello, A. Christopher, A. Colon, W. Deconinck, K. Dehmelt, A. Deshpande, J. Dilling, D. H. Dongwi, P. Fisher, T. Gautam, M. Gericke, D. Hasell, M. Hasinoff, E. Ihloff, R. Johnston, R. Kanungo, J. Kelsey , et al. (21 additional authors not shown)

Abstract: The search for a dark photon holds considerable interest in the physics community. Such a force carrier would begin to illuminate the dark sector. Many experiments have searched for such a particle, but so far it has proven elusive. In recent years the concept of a low mass dark photon has gained popularity in the physics community. Of particular recent interest is the $^8$Be and $^4$He anomaly, w… ▽ More The search for a dark photon holds considerable interest in the physics community. Such a force carrier would begin to illuminate the dark sector. Many experiments have searched for such a particle, but so far it has proven elusive. In recent years the concept of a low mass dark photon has gained popularity in the physics community. Of particular recent interest is the $^8$Be and $^4$He anomaly, which could be explained by a new fifth force carrier with a mass of 17 MeV/$c^2$. The proposed DarkLight experiment would search for this potential low mass force carrier at ARIEL in the 10-20 MeV e$^+$e$^-$ invariant mass range. This proceeding will focus on the experimental design and physics case of the DarkLight experiment. △ Less

Submitted 14 August, 2022; v1 submitted 8 August, 2022; originally announced August 2022.

Comments: 7 pages, 4 figures, to be submitted as part of the proceedings on "New Scientific Opportunities with the TRIUMF ARIEL e-linac"

Initial performance of the GlueX DIRC detector

Authors: A. Ali, F. Barbosa, J. Bessuille, E. Chudakov, R. Dzhygadlo, C. Fanelli, J. Frye, J. Hardin, A. Hurley, E. Ihloff, G. Kalicy, J. Kelsey, W. B. Li, M. Patsyuk, J. Schwiening, M. Shepherd, J. R. Stevens, T. Whitlatch, M. Williams, Y. Yang

Abstract: The GlueX experiment at Jefferson Laboratory aims to perform quantitative tests of non-perturbative QCD by studying the spectrum of light-quark mesons and baryons. A Detector of Internally Reflected Cherenkov light (DIRC) was installed to enhance the particle identification (PID) capability of the GlueX experiment by providing clean $π$/K separation up to 3.7 GeV/$c$ momentum in the forward region… ▽ More The GlueX experiment at Jefferson Laboratory aims to perform quantitative tests of non-perturbative QCD by studying the spectrum of light-quark mesons and baryons. A Detector of Internally Reflected Cherenkov light (DIRC) was installed to enhance the particle identification (PID) capability of the GlueX experiment by providing clean $π$/K separation up to 3.7 GeV/$c$ momentum in the forward region ($θ<11^{\circ}$), which will allow the study of hybrid mesons decaying into kaon final states with significantly higher efficiency and purity. The new PID system is constructed with radiators from the decommissioned BaBar DIRC counter, combined with new compact photon cameras based on the SuperB FDIRC concept. The full system was successfully installed and commissioned with beam during 2019/2020. The initial PID performance of the system was evaluated and compared to one from Geant4 simulation. △ Less

Submitted 23 May, 2022; originally announced May 2022.

Comments: International Conference on Technology and Instrumentation in Particle Physics 2021, 5 pages

Operation and characterization of a windowless gas jet target in high-intensity electron beams

Authors: B. S. Schlimme, S. Aulenbacher, P. Brand, M. Littich, Y. Wang, P. Achenbach, M. Ball, J. C. Bernauer, M. Biroth, D. Bonaventura, D. Bosnar, S. Caiazza, M. Christmann, E. Cline, A. Denig, M. O. Distler, L. Doria, P. Eckert, A. Esser, I. Friščić, S. Gagneur, J. Geimer, S. Grieser, P. Gülker, P. Herrmann , et al. (32 additional authors not shown)

Abstract: A cryogenic supersonic gas jet target was developed for the MAGIX experiment at the high-intensity electron accelerator MESA. It will be operated as an internal, windowless target in the energy-recovering recirculation arc of the accelerator with different target gases, e.g., hydrogen, deuterium, helium, oxygen, argon, or xenon. Detailed studies have been carried out at the existing A1 multi-spect… ▽ More A cryogenic supersonic gas jet target was developed for the MAGIX experiment at the high-intensity electron accelerator MESA. It will be operated as an internal, windowless target in the energy-recovering recirculation arc of the accelerator with different target gases, e.g., hydrogen, deuterium, helium, oxygen, argon, or xenon. Detailed studies have been carried out at the existing A1 multi-spectrometer facility at the electron accelerator MAMI. This paper focuses on the developed handling procedures and diagnostic tools, and on the performance of the gas jet target under beam conditions. Considering the special features of this type of target, it proves to be well suited for a new generation of high-precision electron scattering experiments at high-intensity electron accelerators. △ Less

Submitted 16 July, 2021; v1 submitted 27 April, 2021; originally announced April 2021.

Wavelength-Shifting Performance of Polyethylene Naphthalate Films in a Liquid Argon Environment

Authors: Y. Abraham, J. Asaadi, V. Basque, W. Castiglioni, R. Dorrill, M. Febbraro, B. Hackett, J. Kelsey, B. R. Littlejohn, I. Parmaksiz, M. Rooks, A. M. Szelc

Abstract: Liquid argon is commonly used as a detector medium for neutrino physics and dark matter experiments in part due to its copious scintillation light production in response to its excitation and ionization by charged particle interactions. As argon scintillation appears in the vacuum ultraviolet (VUV) regime and is difficult to detect, wavelength-shifting materials are typically used to convert VUV l… ▽ More Liquid argon is commonly used as a detector medium for neutrino physics and dark matter experiments in part due to its copious scintillation light production in response to its excitation and ionization by charged particle interactions. As argon scintillation appears in the vacuum ultraviolet (VUV) regime and is difficult to detect, wavelength-shifting materials are typically used to convert VUV light to visible wavelengths more easily detectable by conventional means. In this work, we examine the wavelength-shifting and optical properties of poly(ethylene naphthalate) (PEN), a recently proposed alternative to tetraphenyl butadiene (TPB), the most widely-used wavelength-shifter in argon-based experiments. In a custom cryostat system with well-demonstrated geometric and response stability, we use 128~nm argon scintillation light to examine various PEN-including reflective samples' light-producing capabilities, and study the stability of PEN when immersed in liquid argon. The best-performing PEN-including test reflector was found to produce 34% as much visible light as a TPB-including reference sample, with widely varying levels of light production between different PEN-including test reflectors. Plausible origins for these variations, including differences in optical properties and molecular orientation, are then identified using additional measurements. Unlike TPB-coated samples, PEN-coated samples did not produce long-timescale light collection increases associated with solvation or suspension of wavelength-shifting material in bulk liquid argon. △ Less

Submitted 28 April, 2021; v1 submitted 4 March, 2021; originally announced March 2021.

Comments: 21 pages, 9 figures. Minor edits as suggested by reviewers. Replaced most usages of inches with SI units. Fix a typo in the legend on Figure 9. Other minor revisions

Installation and Commissioning of the GlueX DIRC

Authors: A. Ali, F. Barbosa, J. Bessuille, E. Chudakov, R. Dzhygadlo, C. Fanelli, J. Frye, J. Hardin, A. Hurley, E. Ihloff, G. Kalicy, J. Kelsey, W. B. Li, M. Patsyuk, J. Schwiening, M. Shepherd, J. R. Stevens, T. Whitlatch, M. Williams, Y. Yang

Abstract: The GlueX experiment takes place in experimental Hall D at Jefferson Lab (JLab). With a linearly polarized photon beam of up to 12 GeV energy, GlueX is a dedicated experiment to search for hybrid mesons via photoproduction reactions. The low-intensity (Phase I) of GlueX was recently completed; the high-intensity (Phase II) started in 2020 including an upgraded particle identification system, known… ▽ More The GlueX experiment takes place in experimental Hall D at Jefferson Lab (JLab). With a linearly polarized photon beam of up to 12 GeV energy, GlueX is a dedicated experiment to search for hybrid mesons via photoproduction reactions. The low-intensity (Phase I) of GlueX was recently completed; the high-intensity (Phase II) started in 2020 including an upgraded particle identification system, known as the DIRC (Detection of Internally Reflected Cherenkov light), utilizing components from the decommissioned BaBar experiment. The identification and separation of the kaon final states will significantly enhance the GlueX physics program, by adding the capability of accessing the strange quark flavor content of conventional (and potentially hybrid) mesons. In these proceedings, we report that the installation and commissioning of the DIRC detector has been successfully completed. △ Less

Submitted 1 June, 2020; v1 submitted 14 May, 2020; originally announced May 2020.

The GlueX DIRC Program

Authors: A. Ali, F. Barbosa, J. Bessuille, E. Chudakov, R. Dzhygadlo, C. Fanelli, J. Frye, J. Hardin, A. Hurley, G. Kalicy, J. Kelsey, W. Li, M. Patsyuk, C. Schwarz, J. Schwiening, M. Shepherd, J. R. Stevens, T. Whitlatch, M. Williams, Y. Yang

Abstract: The GlueX experiment is located in experimental Hall D at Jefferson Lab (JLab) and provides a unique capability to search for hybrid mesons in high-energy photoproduction, utilizing a ~9 GeV linearly polarized photon beam. The initial, low-intensity phase of GlueX was recently completed and a high-intensity phase has begun in 2020 which includes an upgraded kaon identification system, known as the… ▽ More The GlueX experiment is located in experimental Hall D at Jefferson Lab (JLab) and provides a unique capability to search for hybrid mesons in high-energy photoproduction, utilizing a ~9 GeV linearly polarized photon beam. The initial, low-intensity phase of GlueX was recently completed and a high-intensity phase has begun in 2020 which includes an upgraded kaon identification system, known as the DIRC (Detection of Internally Reflected Cherenkov light), utilizing components from the decommissioned BaBar DIRC. The identification of kaon final states will significantly enhance the GlueX physics program, to aid in inferring the quark flavor content of conventional (and potentially hybrid) mesons. In these proceedings we describe the installation of the GlueX DIRC and the analysis of initial commissioning data △ Less

Submitted 12 March, 2020; v1 submitted 18 February, 2020; originally announced February 2020.

A New Cryogenic Apparatus to Search for the Neutron Electric Dipole Moment

Authors: M. W. Ahmed, R. Alarcon, A. Aleksandrova, S. Baessler, L. Barron-Palos, L. M. Bartoszek, D. H. Beck, M. Behzadipour, I. Berkutov, J. Bessuille, M. Blatnik, M. Broering, L. J. Broussard, M. Busch, R. Carr, V. Cianciolo, S. M. Clayton, M. D. Cooper, C. Crawford, S. A. Currie, C. Daurer, R. Dipert, K. Dow, D. Dutta, Y. Efremenko , et al. (69 additional authors not shown)

Abstract: A cryogenic apparatus is described that enables a new experiment, nEDM@SNS, with a major improvement in sensitivity compared to the existing limit in the search for a neutron Electric Dipole Moment (EDM). It uses superfluid $^4$He to produce a high density of Ultra-Cold Neutrons (UCN) which are contained in a suitably coated pair of measurement cells. The experiment, to be operated at the Spallati… ▽ More A cryogenic apparatus is described that enables a new experiment, nEDM@SNS, with a major improvement in sensitivity compared to the existing limit in the search for a neutron Electric Dipole Moment (EDM). It uses superfluid $^4$He to produce a high density of Ultra-Cold Neutrons (UCN) which are contained in a suitably coated pair of measurement cells. The experiment, to be operated at the Spallation Neutron Source at Oak Ridge National Laboratory, uses polarized $^3$He from an Atomic Beam Source injected into the superfluid $^4$He and transported to the measurement cells as a co-magnetometer. The superfluid $^4$He is also used as an insulating medium allowing significantly higher electric fields, compared to previous experiments, to be maintained across the measurement cells. These features provide an ultimate statistical uncertainty for the EDM of $2-3\times 10^{-28}$ e-cm, with anticipated systematic uncertainties below this level. △ Less

Submitted 20 November, 2019; v1 submitted 26 August, 2019; originally announced August 2019.

Journal ref: Journal of Instrumentation, Vol 14, P11017, 2019

Measurement of Moller Scattering at 2.5 MeV

Authors: C. S. Epstein, R. Johnston, S. Lee, J. C. Bernauer, R. Corliss, K. Dow, P. Fisher, I. Friscic, D. Hasell, R. G. Milner, P. Moran, S. G. Steadman, Y. Wang, J. Dodge, E. Ihloff, J. Kelsey, C. Vidal, C. M. Cooke

Abstract: Moller scattering is one of the most fundamental processes in QED. Understanding it to high precision is necessary for a variety of modern nuclear and particle physics experiments. In a recent calculation, existing soft-photon radiative corrections were combined with new hard-photon bremsstrahlung calculations to take into account the effect of photon emission at any photon energy, where the elect… ▽ More Moller scattering is one of the most fundamental processes in QED. Understanding it to high precision is necessary for a variety of modern nuclear and particle physics experiments. In a recent calculation, existing soft-photon radiative corrections were combined with new hard-photon bremsstrahlung calculations to take into account the effect of photon emission at any photon energy, where the electron mass was included at all steps. To test the calculation, an experiment was carried out using the 3 MV Van de Graaff electrostatic accelerator at the MIT High Voltage Research Laboratory. Momentum spectra at three scattering angles at an incident electron energy of 2.5 MeV are reported here, and compared to the simulated radiative Moller spectra, based on our previous calculation. Good agreement between the measurements and our calculation is observed in the momentum spectrum at the three angles. △ Less

Submitted 13 April, 2019; v1 submitted 21 March, 2019; originally announced March 2019.

Journal ref: Phys. Rev. D 102, 012006 (2020)

The neutron electric dipole moment experiment at the Spallation Neutron Source

Authors: K. K. H. Leung, M. Ahmed, R. Alarcon, A. Aleksandrova, S. Baeßler, L. Barrón-Palos, L. Bartoszek, D. H. Beck, M. Behzadipour, J. Bessuille, M. A. Blatnik, M. Broering, L. J. Broussard, M. Busch, R. Carr, P. -H. Chu, V. Cianciolo, S. M. Clayton, M. D. Cooper, C. Crawford, S. A. Currie, C. Daurer, R. Dipert, K. Dow, D. Dutta , et al. (68 additional authors not shown)

Abstract: Novel experimental techniques are required to make the next big leap in neutron electric dipole moment experimental sensitivity, both in terms of statistics and systematic error control. The nEDM experiment at the Spallation Neutron Source (nEDM@SNS) will implement the scheme of Golub & Lamoreaux [Phys. Rep., 237, 1 (1994)]. The unique properties of combining polarized ultracold neutrons, polarize… ▽ More Novel experimental techniques are required to make the next big leap in neutron electric dipole moment experimental sensitivity, both in terms of statistics and systematic error control. The nEDM experiment at the Spallation Neutron Source (nEDM@SNS) will implement the scheme of Golub & Lamoreaux [Phys. Rep., 237, 1 (1994)]. The unique properties of combining polarized ultracold neutrons, polarized $^3$He, and superfluid $^4$He will be exploited to provide a sensitivity to $\sim 10^{-28}\,e{\rm \,\cdot\, cm}$. Our cryogenic apparatus will deploy two small ($3\,{\rm L}$) measurement cells with a high density of ultracold neutrons produced and spin analyzed in situ. The electric field strength, precession time, magnetic shielding, and detected UCN number will all be enhanced compared to previous room temperature Ramsey measurements. Our $^3$He co-magnetometer offers unique control of systematic effects, in particular the Bloch-Siegert induced false EDM. Furthermore, there will be two distinct measurement modes: free precession and dressed spin. This will provide an important self-check of our results. Following five years of "critical component demonstration," our collaboration transitioned to a "large scale integration" phase in 2018. An overview of our measurement techniques, experimental design, and brief updates are described in these proceedings. △ Less

Submitted 4 October, 2019; v1 submitted 6 March, 2019; originally announced March 2019.

Comments: Submitted to proceedings of PPNS 2018 - International Workshop on Particle physics at Neutron Sources (https://www.webofconferences.org/epj-web-of-conferences-forthcoming-conferences/1148-ppns-2018)

Design and Operation of a Windowless Gas Target Internal to a Solenoidal Magnet for Use with a Megawatt Electron Beam

Authors: S. Lee, R. Corliss, I. Friščić, R. Alarcon, S. Aulenbacher, J. Balewski, S. Benson, J. C. Bernauer, J. Bessuille, J. Boyce, J. Coleman, D. Douglas, C. S. Epstein, P. Fisher, S. Frierson, M. Garçon, J. Grames, D. Hasell, C. Hernandez-Garcia, E. Ihloff, R. Johnston, K. Jordan, R. Kazimi, J. Kelsey, M. Kohl , et al. (15 additional authors not shown)

Abstract: A windowless hydrogen gas target of nominal thickness $10^{19}$ cm$^{-2}$ is an essential component of the DarkLight experiment, which is designed to utilize the megawatt electron beam at an Energy Recovery Linac (ERL). The design of such a target is challenging because the pressure drops by many orders of magnitude between the central, high-density section of the target and the surrounding beamli… ▽ More A windowless hydrogen gas target of nominal thickness $10^{19}$ cm$^{-2}$ is an essential component of the DarkLight experiment, which is designed to utilize the megawatt electron beam at an Energy Recovery Linac (ERL). The design of such a target is challenging because the pressure drops by many orders of magnitude between the central, high-density section of the target and the surrounding beamline, resulting in laminar, transitional, and finally molecular flow regimes. The target system was assembled and operated at Jefferson Lab's Low Energy Recirculator Facility (LERF) in 2016, and subsequently underwent several revisions and calibration tests at MIT Bates in 2017. The system at dynamic equilibrium was simulated in COMSOL to provide a better understanding of its optimal operation at other working points. We have determined that a windowless gas target with sufficiently high density for DarkLight's experimental needs is feasible in an ERL environment. △ Less

Submitted 30 May, 2019; v1 submitted 6 March, 2019; originally announced March 2019.

Comments: 11 pages, 14 figures; v2: minor improvements; v3: author list updated; v4: minor revision

Journal ref: Nucl. Instrum. Methods Phys. Res. A, 939 (2019), pp. 46-54

Realization of a Large-Acceptance Faraday Cup for 3 MeV Electrons

Authors: R. Johnston, J. Bernauer, C. M. Cooke, R. Corliss, C. S. Epstein, P. Fisher, I. Friščić, D. Hasell, E. Ihloff, J. Kelsey, S. Lee, R. G. Milner, P. Moran, S. G. Steadman, C. Vidal

Abstract: The design, construction, installation, and testing of a Faraday Cup intended to measure the current of a 3 MeV, 1 microampere electron beam is described. Built as a current monitor for a Møller scattering measurement at the MIT High Voltage Research Laboratory, the device combines a large angular acceptance with the capability to measure a continuous, low energy beam. Bench studies of its perform… ▽ More The design, construction, installation, and testing of a Faraday Cup intended to measure the current of a 3 MeV, 1 microampere electron beam is described. Built as a current monitor for a Møller scattering measurement at the MIT High Voltage Research Laboratory, the device combines a large angular acceptance with the capability to measure a continuous, low energy beam. Bench studies of its performance demonstrate current measurements accurate to the percent level at 1 microampere. The Faraday Cup was designed and constructed at MIT and has been in use at the HVRL since 2017, providing a significantly more detailed measurement of beam current than was previously available. △ Less

Submitted 27 November, 2018; originally announced November 2018.

Comments: 4 pages

The GlueX DIRC Project

Authors: Justin Stevens, Fernando Barbosa, Jason Bessuille, Eugene Chudakov, Roman Dzhygadlo, Cristiano Fanelli, John Frye, John Hardin, Jim Kelsey, Maria Patsyuk, Carsten Schwartz, Jochen Schwiening, Matthew Shepherd, Tim Whitlatch, Michael Williams

Abstract: The GlueX experiment was designed to search for and study the pattern of gluonic excitations in the meson spectrum produced through photoproduction reactions at a new tagged photon beam facility in Hall D at Jefferson Laboratory. The particle identification capabilities of the GlueX experiment will be enhanced by constructing a DIRC (Detection of Internally Reflected Cherenkov light) detector, uti… ▽ More The GlueX experiment was designed to search for and study the pattern of gluonic excitations in the meson spectrum produced through photoproduction reactions at a new tagged photon beam facility in Hall D at Jefferson Laboratory. The particle identification capabilities of the GlueX experiment will be enhanced by constructing a DIRC (Detection of Internally Reflected Cherenkov light) detector, utilizing components of the decommissioned BaBar DIRC. The DIRC will allow systematic studies of kaon final states that are essential for inferring the quark flavor content of both hybrid and conventional mesons. The design for the GlueX DIRC is presented, including the new expansion volumes that are currently under development. △ Less

Submitted 11 July, 2016; v1 submitted 17 June, 2016; originally announced June 2016.

Comments: 8 pages, 6 figures

The DarkLight Experiment: A Precision Search for New Physics at Low Energies

Authors: J. Balewski, J. Bernauer, J. Bessuille, R. Corliss, R. Cowan, C. Epstein, P. Fisher, D. Hasell, E. Ihloff, Y. Kahn, J. Kelsey, R. Milner, S. Steadman, J. Thaler, C. Tschalaer, C. Vidal, S. Benson, J. Boyce, D. Douglas, P. Evtushenko, C. Hernandez-Garcia, C. Keith, C. Tennant, S. Zhang, R. Alarcon , et al. (15 additional authors not shown)

Abstract: We describe the current status of the DarkLight experiment at Jefferson Laboratory. DarkLight is motivated by the possibility that a dark photon in the mass range 10 to 100 MeV/c$^2$ could couple the dark sector to the Standard Model. DarkLight will precisely measure electron proton scattering using the 100 MeV electron beam of intensity 5 mA at the Jefferson Laboratory energy recovering linac inc… ▽ More We describe the current status of the DarkLight experiment at Jefferson Laboratory. DarkLight is motivated by the possibility that a dark photon in the mass range 10 to 100 MeV/c$^2$ could couple the dark sector to the Standard Model. DarkLight will precisely measure electron proton scattering using the 100 MeV electron beam of intensity 5 mA at the Jefferson Laboratory energy recovering linac incident on a windowless gas target of molecular hydrogen. The complete final state including scattered electron, recoil proton, and e+e- pair will be detected. A phase-I experiment has been funded and is expected to take data in the next eighteen months. The complete phase-II experiment is under final design and could run within two years after phase-I is completed. The DarkLight experiment drives development of new technology for beam, target, and detector and provides a new means to carry out electron scattering experiments at low momentum transfers. △ Less

Submitted 15 December, 2014; originally announced December 2014.

Comments: Whitepaper submitted to Town Meeting on Fundamental and Symmetries and Neutrinos, O'Hare airport, Chicago, IL

The Q_weak Experimental Apparatus

Authors: Qweak Collaboration, T. Allison, M. Anderson, D. Androic, D. S. Armstrong, A. Asaturyan, T. D. Averett, R. Averill, J. Balewski, J. Beaufait, R. S. Beminiwattha, J. Benesch, F. Benmokhtar, J. Bessuille, J. Birchall, E. Bonnell, J. Bowman, P. Brindza, D. B. Brown, R. D. Carlini, G. D. Cates, B. Cavness, G. Clark, J. C. Cornejo, S. Covrig Dusa , et al. (104 additional authors not shown)

Abstract: The Jefferson Lab Q_weak experiment determined the weak charge of the proton by measuring the parity-violating elastic scattering asymmetry of longitudinally polarized electrons from an unpolarized liquid hydrogen target at small momentum transfer. A custom apparatus was designed for this experiment to meet the technical challenges presented by the smallest and most precise ${\vec{e}}$p asymmetry… ▽ More The Jefferson Lab Q_weak experiment determined the weak charge of the proton by measuring the parity-violating elastic scattering asymmetry of longitudinally polarized electrons from an unpolarized liquid hydrogen target at small momentum transfer. A custom apparatus was designed for this experiment to meet the technical challenges presented by the smallest and most precise ${\vec{e}}$p asymmetry ever measured. Technical milestones were achieved at Jefferson Lab in target power, beam current, beam helicity reversal rate, polarimetry, detected rates, and control of helicity-correlated beam properties. The experiment employed 180 microA of 89% longitudinally polarized electrons whose helicity was reversed 960 times per second. The electrons were accelerated to 1.16 GeV and directed to a beamline with extensive instrumentation to measure helicity-correlated beam properties that can induce false asymmetries. Moller and Compton polarimetry were used to measure the electron beam polarization to better than 1%. The electron beam was incident on a 34.4 cm liquid hydrogen target. After passing through a triple collimator system, scattered electrons between 5.8 degrees and 11.6 degrees were bent in the toroidal magnetic field of a resistive copper-coil magnet. The electrons inside this acceptance were focused onto eight fused silica Cerenkov detectors arrayed symmetrically around the beam axis. A total scattered electron rate of about 7 GHz was incident on the detector array. The detectors were read out in integrating mode by custom-built low-noise pre-amplifiers and 18-bit sampling ADC modules. The momentum transfer Q^2 = 0.025 GeV^2 was determined using dedicated low-current (~100 pA) measurements with a set of drift chambers before (and a set of drift chambers and trigger scintillation counters after) the toroidal magnet. △ Less

Submitted 6 January, 2015; v1 submitted 24 September, 2014; originally announced September 2014.

Comments: 48 pages, 36 figures. Accepted by Nuclear Instruments and Methods A

Report number: JLab-PHY-14-1959

Improving Photoelectron Counting and Particle Identification in Scintillation Detectors with Bayesian Techniques

Authors: M. Akashi-Ronquest, P. -A. Amaudruz, M. Batygov, B. Beltran, M. Bodmer, M. G. Boulay, B. Broerman, B. Buck, A. Butcher, B. Cai, T. Caldwell, M. Chen, Y. Chen, B. Cleveland, K. Coakley, K. Dering, F. A. Duncan, J. A. Formaggio, R. Gagnon, D. Gastler, F. Giuliani, M. Gold, V. V. Golovko, P. Gorel, K. Graham , et al. (57 additional authors not shown)

Abstract: Many current and future dark matter and neutrino detectors are designed to measure scintillation light with a large array of photomultiplier tubes (PMTs). The energy resolution and particle identification capabilities of these detectors depend in part on the ability to accurately identify individual photoelectrons in PMT waveforms despite large variability in pulse amplitudes and pulse pileup. We… ▽ More Many current and future dark matter and neutrino detectors are designed to measure scintillation light with a large array of photomultiplier tubes (PMTs). The energy resolution and particle identification capabilities of these detectors depend in part on the ability to accurately identify individual photoelectrons in PMT waveforms despite large variability in pulse amplitudes and pulse pileup. We describe a Bayesian technique that can identify the times of individual photoelectrons in a sampled PMT waveform without deconvolution, even when pileup is present. To demonstrate the technique, we apply it to the general problem of particle identification in single-phase liquid argon dark matter detectors. Using the output of the Bayesian photoelectron counting algorithm described in this paper, we construct several test statistics for rejection of backgrounds for dark matter searches in argon. Compared to simpler methods based on either observed charge or peak finding, the photoelectron counting technique improves both energy resolution and particle identification of low energy events in calibration data from the DEAP-1 detector and simulation of the larger MiniCLEAN dark matter detector. △ Less

Submitted 12 December, 2014; v1 submitted 8 August, 2014; originally announced August 2014.

Comments: 16 pages, 16 figures

Focal-plane detector system for the KATRIN experiment

Authors: J. F. Amsbaugh, J. Barrett, A. Beglarian, T. Bergmann, H. Bichsel, L. I. Bodine, J. Bonn, N. M. Boyd, T. H. Burritt, Z. Chaoui, S. Chilingaryan, T. J. Corona, P. J. Doe, J. A. Dunmore, S. Enomoto, J. Fischer, J. A. Formaggio, F. M. Fränkle, D. Furse, H. Gemmeke, F. Glück, F. Harms, G. C. Harper, J. Hartmann, M. A. Howe , et al. (26 additional authors not shown)

Abstract: The focal-plane detector system for the KArlsruhe TRItium Neutrino (KATRIN) experiment consists of a multi-pixel silicon p-i-n-diode array, custom readout electronics, two superconducting solenoid magnets, an ultra high-vacuum system, a high-vacuum system, calibration and monitoring devices, a scintillating veto, and a custom data-acquisition system. It is designed to detect the low-energy electro… ▽ More The focal-plane detector system for the KArlsruhe TRItium Neutrino (KATRIN) experiment consists of a multi-pixel silicon p-i-n-diode array, custom readout electronics, two superconducting solenoid magnets, an ultra high-vacuum system, a high-vacuum system, calibration and monitoring devices, a scintillating veto, and a custom data-acquisition system. It is designed to detect the low-energy electrons selected by the KATRIN main spectrometer. We describe the system and summarize its performance after its final installation. △ Less

Submitted 28 January, 2015; v1 submitted 10 April, 2014; originally announced April 2014.

Comments: 28 pages. Two figures revised for clarity. Final version published in Nucl. Inst. Meth. A

Journal ref: Nucl. Inst. Meth. A 778 (2015) 40-60

Design and Fabrication of a Highly Integrated Silicon Detector for the STAR Experiment at Brookhaven National Laboratory

Authors: Benjamin Buck, Eric Anderssen, Jason Bessuille, Mario Cepeda, Thomas Johnson, James Kelsey, Gerrit van Nieuwenhuizen, Gerard Visser

Abstract: We present the design of a detector used as a particle tracking device in the STAR experiment at the RHIC collider of Brookhaven National Laboratories. The "stave," 24 of which make up the completed detector, is a highly mechanically integrated design comprised of 6 custom silicon sensors mounted on a Kapton substrate. 4608 wire bonds connect these sensors to 36 analog front-end chips which are mo… ▽ More We present the design of a detector used as a particle tracking device in the STAR experiment at the RHIC collider of Brookhaven National Laboratories. The "stave," 24 of which make up the completed detector, is a highly mechanically integrated design comprised of 6 custom silicon sensors mounted on a Kapton substrate. 4608 wire bonds connect these sensors to 36 analog front-end chips which are mounted on the same substrate. Power and signal connectivity from the hybrid to the front-end chips is provided by wire bonds. The entire circuit is mounted on a carbon fiber base co-cured to the Kapton substrate. We present the unique design challenges for this detector and some novel techniques for overcoming them. △ Less

Submitted 3 April, 2014; originally announced April 2014.

Comments: 14 Pages, 17 Figures. Submitted to New England iMAPS 2014 Symposium and Expo

The OLYMPUS Internal Hydrogen Target

Authors: J. C. Bernauer, V. Carassiti, G. Ciullo, B. S. Henderson, E. Ihloff, J. Kelsey, P. Lenisa, R. Milner, A. Schmidt, M. Statera

Abstract: An internal hydrogen target system was developed for the OLYMPUS experiment at DESY, in Hamburg, Germany. The target consisted of a long, thin-walled, tubular cell within an aluminum scattering chamber. Hydrogen entered at the center of the cell and exited through the ends, where it was removed from the beamline by a multistage pumping system. A cryogenic coldhead cooled the target cell to counter… ▽ More An internal hydrogen target system was developed for the OLYMPUS experiment at DESY, in Hamburg, Germany. The target consisted of a long, thin-walled, tubular cell within an aluminum scattering chamber. Hydrogen entered at the center of the cell and exited through the ends, where it was removed from the beamline by a multistage pumping system. A cryogenic coldhead cooled the target cell to counteract heating from the beam and increase the density of hydrogen in the target. A fixed collimator protected the cell from synchrotron radiation and the beam halo. A series of wakefield suppressors reduced heating from beam wakefields. The target system was installed within the DORIS storage ring and was successfully operated during the course of the OLYMPUS experiment in 2012. Information on the design, fabrication, and performance of the target system is reported. △ Less

Submitted 2 April, 2014; originally announced April 2014.

Comments: 9 pages, 13 figures

Journal ref: Nucl. Instrum. Meth. A 755, 20-27 (2014)

Update on the MiniCLEAN Dark Matter Experiment

Authors: K. Rielage, M. Akashi-Ronquest, M. Bodmer, R. Bourque, B. Buck, A. Butcher, T. Caldwell, Y. Chen, K. Coakley, E. Flores, J. A. Formaggio, D. Gastler, F. Giuliani, M. Gold, E. Grace, J. Griego, N. Guerrero, V. Guiseppe, R. Henning, A. Hime, S. Jaditz, C. Kachulis, E. Kearns, J. Kelsey, J. R. Klein , et al. (21 additional authors not shown)

Abstract: The direct search for dark matter is entering a period of increased sensitivity to the hypothetical Weakly Interacting Massive Particle (WIMP). One such technology that is being examined is a scintillation only noble liquid experiment, MiniCLEAN. MiniCLEAN utilizes over 500 kg of liquid cryogen to detect nuclear recoils from WIMP dark matter and serves as a demonstration for a future detector of o… ▽ More The direct search for dark matter is entering a period of increased sensitivity to the hypothetical Weakly Interacting Massive Particle (WIMP). One such technology that is being examined is a scintillation only noble liquid experiment, MiniCLEAN. MiniCLEAN utilizes over 500 kg of liquid cryogen to detect nuclear recoils from WIMP dark matter and serves as a demonstration for a future detector of order 50 to 100 tonnes. The liquid cryogen is interchangeable between argon and neon to study the A$^{2}$ dependence of the potential signal and examine backgrounds. MiniCLEAN utilizes a unique modular design with spherical geometry to maximize the light yield using cold photomultiplier tubes in a single-phase detector. Pulse shape discrimination techniques are used to separate nuclear recoil signals from electron recoil backgrounds. MiniCLEAN will be spiked with additional $^{39}$Ar to demonstrate the effective reach of the pulse shape discrimination capability. Assembly of the experiment is underway at SNOLAB and an update on the project is given. △ Less

Submitted 19 March, 2014; originally announced March 2014.

Comments: To appear in the Proceedings of the TAUP 2013 Conference (F. Avignone & W. Haxton, editors, Physics Procedia, Elsevier)

Report number: LA-UR-14-21626

Design of the MiniCLEAN dark matter search veto detector subsystem

Authors: Robert Abruzzio, Benjamin Buck, Stephen Jaditz, James Kelsey, Jocelyn Monroe, Kimberyl Palladino

Abstract: This paper describes the design of the active muon veto subsystem for the MiniCLEAN dark matter direct detection experiment at SNOLAB in Sudbury, Ontario, Canada. The water-filled veto is instrumented with 48 PMTs which are read out by front end electronics to time multiplex 48 photomultiplier channels into 6 digitizer channels and provide an instantaneous hit sum across the subsystem (N-Hit) for… ▽ More This paper describes the design of the active muon veto subsystem for the MiniCLEAN dark matter direct detection experiment at SNOLAB in Sudbury, Ontario, Canada. The water-filled veto is instrumented with 48 PMTs which are read out by front end electronics to time multiplex 48 photomultiplier channels into 6 digitizer channels and provide an instantaneous hit sum across the subsystem (N-Hit) for the veto trigger. We describe the primary system components: the PMTs, the support structure, the front-end electronics, and the data acquisition system. △ Less

Submitted 6 March, 2014; originally announced March 2014.

Comments: 11 Pages

The OLYMPUS Experiment

Authors: R. Milner, D. K. Hasell, M. Kohl, U. Schneekloth, N. Akopov, R. Alarcon, V. A. Andreev, O. Ates, A. Avetisyan, D. Bayadilov, R. Beck, S. Belostotski, J. C. Bernauer, J. Bessuille, F. Brinker, B. Buck, J. R. Calarco, V. Carassiti, E. Cisbani, G. Ciullo, M. Contalbrigo, N. D'Ascenzo, R. De Leo, J. Diefenbach, T. W. Donnelly , et al. (48 additional authors not shown)

Abstract: The OLYMPUS experiment was designed to measure the ratio between the positron-proton and electron-proton elastic scattering cross sections, with the goal of determining the contribution of two-photon exchange to the elastic cross section. Two-photon exchange might resolve the discrepancy between measurements of the proton form factor ratio, $μ_p G^p_E/G^p_M$, made using polarization techniques and… ▽ More The OLYMPUS experiment was designed to measure the ratio between the positron-proton and electron-proton elastic scattering cross sections, with the goal of determining the contribution of two-photon exchange to the elastic cross section. Two-photon exchange might resolve the discrepancy between measurements of the proton form factor ratio, $μ_p G^p_E/G^p_M$, made using polarization techniques and those made in unpolarized experiments. OLYMPUS operated on the DORIS storage ring at DESY, alternating between 2.01~GeV electron and positron beams incident on an internal hydrogen gas target. The experiment used a toroidal magnetic spectrometer instrumented with drift chambers and time-of-flight detectors to measure rates for elastic scattering over the polar angular range of approximately $25^\circ$--$75^\circ$. Symmetric Møller/Bhabha calorimeters at $1.29^\circ$ and telescopes of GEM and MWPC detectors at $12^\circ$ served as luminosity monitors. A total luminosity of approximately 4.5~fb$^{-1}$ was collected over two running periods in 2012. This paper provides details on the accelerator, target, detectors, and operation of the experiment. △ Less

Submitted 5 December, 2013; originally announced December 2013.

Comments: 40 pages, 26 figures

Journal ref: Nuclear Inst. and Methods in Physics Research, A (2014) pp. 1-17

DarkLight: A Search for Dark Forces at the Jefferson Laboratory Free-Electron Laser Facility

Authors: J. Balewski, J. Bernauer, W. Bertozzi, J. Bessuille, B. Buck, R. Cowan, K. Dow, C. Epstein, P. Fisher, S. Gilad, E. Ihloff, Y. Kahn, A. Kelleher, J. Kelsey, R. Milner, C. Moran, L. Ou, R. Russell, B. Schmookler, J. Thaler, C. Tschalär, C. Vidal, A. Winnebeck, S. Benson, C. Gould , et al. (42 additional authors not shown)

Abstract: We give a short overview of the DarkLight detector concept which is designed to search for a heavy photon A' with a mass in the range 10 MeV/c^2 < m(A') < 90 MeV/c^2 and which decays to lepton pairs. We describe the intended operating environment, the Jefferson Laboratory free electon laser, and a way to extend DarkLight's reach using A' --> invisible decays. We give a short overview of the DarkLight detector concept which is designed to search for a heavy photon A' with a mass in the range 10 MeV/c^2 < m(A') < 90 MeV/c^2 and which decays to lepton pairs. We describe the intended operating environment, the Jefferson Laboratory free electon laser, and a way to extend DarkLight's reach using A' --> invisible decays. △ Less

Submitted 19 July, 2013; v1 submitted 16 July, 2013; originally announced July 2013.

Comments: 8 pages, 4 figures, contributed to the Community Summer Study 2013 "Snowmass on the Mississippi" in the New, Light, Weakly Coupled Particles (NLWCP) subgroup of the Intensity Frontier

The Qweak Experiment: A Search for New Physics at the TeV Scale via a Measurement of the Proton's Weak Charge

Authors: R. D. Carlini, J. M. Finn, S. Kowalski, S. A. Page, D. S. Armstrong, A. Asaturyan, T. Averett, J. Benesch, J. Birchall, P. Bosted, A. Bruell, C. L. Capuano, G. Cates, C. Carrigee, S. Chattopadhyay, S. Covrig, C. A. Davis, K. Dow, J. Dunne, D. Dutta, R. Ent, J. Erler, W. Falk, H. Fenker, T. A. Forest , et al. (61 additional authors not shown)

Abstract: We propose a new precision measurement of parity-violating electron scattering on the proton at very low Q^2 and forward angles to challenge predictions of the Standard Model and search for new physics. A unique opportunity exists to carry out the first precision measurement of the proton's weak charge, $Q_W =1 - 4\sin^2θ_W$. A 2200 hour measurement of the parity violating asymmetry in elastic ep… ▽ More We propose a new precision measurement of parity-violating electron scattering on the proton at very low Q^2 and forward angles to challenge predictions of the Standard Model and search for new physics. A unique opportunity exists to carry out the first precision measurement of the proton's weak charge, $Q_W =1 - 4\sin^2θ_W$. A 2200 hour measurement of the parity violating asymmetry in elastic ep scattering at Q^2=0.03 (GeV/c)^2 employing 180 $μ$A of 85% polarized beam on a 35 cm liquid Hydrogen target will determine the proton's weak charge with approximately 4% combined statistical and systematic errors. The Standard Model makes a firm prediction of $Q_W$, based on the running of the weak mixing angle from the Z0 pole down to low energies, corresponding to a 10 sigma effect in this experiment. △ Less

Submitted 7 February, 2012; v1 submitted 6 February, 2012; originally announced February 2012.

Comments: Proposal to Jefferson Lab Program Advisory Committee, December 2007. 93 pages, 44 figures. Uploaded here so a permanent copy is available, and for other papers to use arXiv version as reference First four authors are the spokespersons

The Forward GEM Tracker of STAR at RHIC

Authors: F. Simon, J. Balewski, R. Fatemi, D. Hasell, J. Kelsey, R. Majka, B. Page, M. Plesko, D. Underwood, N. Smirnov, J. Sowinski, H. Spinka, B. Surrow, G. Visser

Abstract: The STAR experiment at the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory (BNL) is in the process of designing and constructing a forward tracking system based on triple GEM technology. This upgrade is necessary to give STAR the capability to reconstruct and identify the charge sign of W bosons over an extended rapidity range through their leptonic decay mode into an el… ▽ More The STAR experiment at the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory (BNL) is in the process of designing and constructing a forward tracking system based on triple GEM technology. This upgrade is necessary to give STAR the capability to reconstruct and identify the charge sign of W bosons over an extended rapidity range through their leptonic decay mode into an electron (positron) and a neutrino. This will allow a detailed study of the flavor-separated spin structure of the proton in polarized p + p collisions uniquely available at RHIC. The Forward GEM Tracker FGT will consist of six triple GEM disks with an outer radius of ~39 cm and an inner radius of ~10.5 cm, arranged along the beam pipe, covering the pseudo-rapidity range from 1.0 to 2.0 over a wide range of collision vertices. The GEM foils will be produced by Tech-Etch, Inc. Beam tests with test detectors using 10 cm x 10 cm Tech-Etch GEM foils and a two dimensional orthogonal strip readout have demonstrated a spatial resolution of 70 um or better and high efficiency. △ Less

Submitted 14 November, 2008; originally announced November 2008.

Comments: 3 pages, 4 figures, submitted to the Conference Record of the IEEE NSS 2008, Dresden, Germany

Beam Performance of Tracking Detectors with Industrially Produced GEM Foils

Authors: Frank Simon, James Kelsey, Michael Kohl, Richard Majka, Miro Plesko, Tai Sakuma, Nikolai Smirnov, Harold Spinka, Bernd Surrow, David Underwood

Abstract: Three Gas-Electron-Multiplier tracking detectors with an active area of 10 cm x 10 cm and a two-dimensional, laser-etched orthogonal strip readout have been tested extensively in particle beams at the Meson Test Beam Facility at Fermilab. These detectors used GEM foils produced by Tech-Etch, Inc. They showed an efficiency in excess of 95% and spatial resolution better than 70 um. The influence o… ▽ More Three Gas-Electron-Multiplier tracking detectors with an active area of 10 cm x 10 cm and a two-dimensional, laser-etched orthogonal strip readout have been tested extensively in particle beams at the Meson Test Beam Facility at Fermilab. These detectors used GEM foils produced by Tech-Etch, Inc. They showed an efficiency in excess of 95% and spatial resolution better than 70 um. The influence of the angle of incidence of particles on efficiency and spatial resolution was studied in detail. △ Less

Submitted 17 September, 2008; v1 submitted 26 August, 2008; originally announced August 2008.

Comments: 8 pages, 9 figures, accepted by Nuclear Instruments and Methods in Physics Research A

Triple GEM Detectors for the Forward Tracker in STAR

Authors: Frank Simon, James Kelsey, Michael Kohl, Richard Majka, Miroslav Plesko, David Underwood, Tai Sakuma, Nikolai Smirnov, Harold Spinka, Bernd Surrow

Abstract: Future measurements of the flavor-separated spin structure of the proton via parity-violating W boson production at RHIC require an upgrade of the forward tracking system of the STAR detector. This upgrade will allow the reconstruction of the charge sign of electrons and positrons produced from decaying W bosons. A design based on six large area triple GEM disks using GEM foils produced by Tech-… ▽ More Future measurements of the flavor-separated spin structure of the proton via parity-violating W boson production at RHIC require an upgrade of the forward tracking system of the STAR detector. This upgrade will allow the reconstruction of the charge sign of electrons and positrons produced from decaying W bosons. A design based on six large area triple GEM disks using GEM foils produced by Tech-Etch Inc. has emerged as a cost-effective solution to provide the necessary tracking precision. We report first results from a beam test of three test detectors using Tech-Etch produced GEM foils and a laser etched two dimensional strip readout. The detectors show good operational stability, high efficiency and a spacial resolution of around 70 um or better, exceeding the requirements for the forward tracking upgrade. The influence of the angle of incidence of the particles on the spatial resolution of the detectors has also been studied in detail. △ Less

Submitted 23 November, 2007; originally announced November 2007.

Comments: 5 pages, 8 figures, presented at the IEEE Nuclear Science Symposium in Honolulu, HI, USA, October 27 - November 3, 2007