HLB120-240 Series 13KW To 78KW Dual Voltage DC/AC Load Banks
HLB120-240 Series 13KW To 78KW Dual Voltage DC/AC Load Banks
Features
Manual constant current control
Lead Acid or Ni-cad battery testing
Battery charger / rectifier and single phase testing
AC testing of UPS and generators
Simple operation via panel switches
Dual voltage feature
Test sockets for voltage and current readings
Adjustable load current
Voltage operation up to 260V
Safety isolation contactors
Fan fail protection
Case Size A HLB120-240
High power
Portable
The Hillstone HLB120-240 series load banks are designed to perform a manually controlled constant
current discharge on lead acid or ni-cad batteries up to 260 volts. Fine control is provided from
approximately 1A to max current via panel mounted switches. The unit has force cooled high power
resistor elements and several safety features including fan fail auto shut-down, emergency stop push
button and battery isolation of each load circuit via continuously rated DC contactors. All designs
incorporate the Hillstone dual voltage feature which allows double the available load current at half
voltage.
Hillstone Products Ltd Units 1&2 Freetown Business Park, Hudcar Lane Bury, Lancashire UK BL96HD
TEL: +44(0)161-763-3100 FAX: +44(0)161-7633158 sales@hillstone.co.uk www.hillstone.co.uk
TECHNICAL SUMMARY SHEET
HLB120-240 Series 13KW to 78KW
Issue: 14 (Oct 2016) Pages: 3
HLB120-240 Specification:
Technical Summary Sheet – HLB120-240 Series 13KW to 78KW
Hillstone Products Ltd Units 1&2 Freetown Business Park, Hudcar Lane Bury, Lancashire UK BL96HD
TEL: +44(0)161-763-3100 FAX: +44(0)161-7633158 sales@hillstone.co.uk www.hillstone.co.uk
TECHNICAL SUMMARY SHEET
HLB120-240 Series 13KW to 78KW
Issue: 14 (Oct 2016) Pages: 3
Easy load bank selector and max load calculator for different
Technical Summary Sheet – HLB120-240 Series 13KW to 78KW
test voltages
STEP 1
Determine the max test voltage
Use Range 1 for max test voltages below 130V
Use Range 2 for max test voltages below 260V
STEP 2
Calculate required minimum ohms = Min volts / test Amps
Example: 99 volts / 155 amps = 0.64 ohms
STEP 3
Select minimum ohms from the appropriate Range on the rating table
Note: always select a lower ohmic value that the result in step 2
Example: HLB120-240-32 = 0.52 ohms on Range 1 and will provide 190A at 99V
Notes
Units are designed for indoor use in a clean, dry and well ventilated environment.
The available current and ratings are proportional to the end of test voltage.
Information in technical literature, quotations or datasheets are intended to be correct at the time of publication. Hillstone
Products Ltd bears no responsibility for the accuracy of any information given.
We reserve the right to make detail changes to specification, components, dimensions or
weights at the time of design or manufacture without prior notice.
All designs, software & information is the copyright and intellectual property of Hillstone Products Ltd.
Hillstone Products Ltd Units 1&2 Freetown Business Park, Hudcar Lane Bury, Lancashire UK BL96HD
TEL: +44(0)161-763-3100 FAX: +44(0)161-7633158 sales@hillstone.co.uk www.hillstone.co.uk