Electrical System
Electrical System
Electrical System
KAP
KAPTraining
TrainingCentre
Centre
Monitor system
1. Sensors
2. HST controller
3. Engine controller
4. KOMTRAX terminal
5. Battery
6. Alarm buzzer
7. Display panel A
8. Display panel B
a. Sensor signal
b. CAN signal
c. Power supply
d. Alarm buzzer signal
KAP
KAPTraining
TrainingCentre
Centre
Monitor panel
KAP
KAPTraining
TrainingCentre
Centre
Processing in monitor panel (Common to all specifications)
KAP
KAPTraining
TrainingCentre
Centre
Processing in monitor panel (Common to all specifications)
KAP
KAPTraining
TrainingCentre
Centre
Engine control
2. Starting switch
3. Engine controller
4. HST controller
5. Monitor panel
6. Fuel control dial
7. Decelerator pedal
8. Engine
9. Engine speed sensor
10. Coolant temperature sensor
11. Engine oil pressure switch
12. Injector
13. Fuel supply pump valve
KAP
KAPTraining
TrainingCentre
Centre
Cooling control system
1. Battery
2. Battery relay
3. HST controller
4. Engine controller
5. Monitor panel
6. Cooling fan motor
7. Work equipment and fan pump
8. Fan rotation selector switch
9. Control valve
10. Fan EPC valve
11. Fan speed sensor
12. Hydraulic oil temperature
sensor
13. Engine
14. Engine speed sensor
15. Coolant temperature sensor
16. Aftercooler temperature sensor
KAP
KAPTraining
TrainingCentre
Centre
Cooling control system
Fan speed control
Based on the monitoring results of the temperature from the coolant,
hydraulic oil and aftercooler temperature sensors, the HST controller
controls the flow rate to the cooling fan motor to obtain appropriate
fan speed.
The HST controller selects the direction of fan by operating the cooling
fan motor reverse solenoid valve according to the mode selected.
1. Battery
2. Battery relay
3. Engine controller
4. Fuse box
5. HST controller
15. R.H. HST pump forward EPC valve
6. Decelerator pedal potentiometer
16. L.H. HST pump reverse EPC valve
7. Brake pedal potentiometer
17. R.H. HST pump reverse EPC valve
8. PCCS lever (for steering)
18. L.H. HST circuit oil pressure sensor
9. Fuel control dial potentiometer
19. R.H. HST circuit oil pressure sensor
10. Monitor panel
20. L.H. HST motor speed sensor
11. Reverse travel speed setting switch
21. R.H. HST motor speed sensor
12. Shift mode switch
22. L.H. HST motor EPC valve
13. Engine speed sensor
23. R.H. HST motor EPC valve
14. L.H. HST pump forward EPC valve
KAP
KAPTraining
TrainingCentre
Centre
HST control system 2/2
Input and output signals g. Steering and directional and gear shift signal
a. Controller power supply h. Fuel control dial stroke signal
b. CAN signal j. Engine speed signal
c. Reverse travel speed setting signal k. HST circuit oil pressure signal
d. Shift mode signal m. HST motor speed signal
e. Decelerator pedal stroke signal n. HST pump EPC valve drive signal
f. Brake pedal stroke signal p. HST motor EPC drive signal
KAP
KAPTraining
TrainingCentre
Centre
Gear shift control system
Gear shifting by operator
The operator can select the quick shift mode or the variable shift mode with the
shift mode switch.
If the steering and directional and gear shift lever is leaned forward (for forward
travel), a set travel speed is decided according to the gear speed of broken line
(B) in the above graph.
If the steering and directional and gear shift lever is leaned backward (for reverse
travel), a set travel speed is decided according to the gear speed of set (A) to (E)
of the reverse travel speed switch in the above graph.
When the steering and directional and gear shift lever is in the neutral position, the
set travel speed is 0 km/h.
KAP
KAPTraining
TrainingCentre
Centre
Set travel speeds corresponding to gear speeds
KAP
KAPTraining
TrainingCentre
Centre
Deceleration command map
If the fuel control dial or decelerator pedal is
operated, a deceleration command is issued
according to the deceleration command map.
The deceleration command of fuel control dial
is higher than that of the decelerator pedal.
Accordingly, even if the fuel control dial is
returned from the "Full" speed position, higher
output is secured.
The deceleration command means the ratio
to the set travel speed.
Example)
When the fuel control dial is at the "Full" speed
position and the decelerator pedal is not
pressed:
The deceleration command is 100%, and the
command travel speed is equal to the set
travel speed.
When the fuel control dial or the decelerator
pedal is set in the Medium speed position:
The travel speed is limited according to the
formula of Command travel speed =
Deceleration command x Set travel speed/100.
KAP
KAPTraining
TrainingCentre
Centre
Brake command map
KAP
KAPTraining
TrainingCentre
Centre
Changing travel speed according to change of engine speed
KAP
KAPTraining
TrainingCentre
Centre
Straight-travel correction control system
The HST controller monitors the operating conditions of each lever and each
pedal and constantly controls the swash plate angle of the HST pump, or the
delivery of the HST pump, so that the output speed of the right and left
HST motors will be the same.
While the machine is traveling straight forward, if the right HST motor speed
is higher than the left HST motor speed, the HST controller lowers the control
signal of the right forward HST pump EPC valve so that the machine will
always travel straight.
KAP
KAPTraining
TrainingCentre
Centre
Parking brake control system
KAP
KAPTraining
TrainingCentre
Centre
Component equipment of system
Monitor panel
KAP
KAPTraining
TrainingCentre
Centre
Monitor panel
Input and output signals
KAP
KAPTraining
TrainingCentre
Centre
Monitor panel display
KAP
KAPTraining
TrainingCentre
Centre
Engine controller
KAP
KAPTraining
TrainingCentre
Centre
Engine controller
KAP
KAPTraining
TrainingCentre
Centre
KAP
KAPTraining
TrainingCentre
Centre
Engine controller
KAP
KAPTraining
TrainingCentre
Centre
Engine controller
KAP
KAPTraining
TrainingCentre
Centre
HST controller
KAP
KAPTraining
TrainingCentre
Centre
HST controller
KAP
KAPTraining
TrainingCentre
Centre
HST controller
KAP
KAPTraining
TrainingCentre
Centre
PCCS lever (for steering)
PCCS: Abbreviation for Palm Command Control System
Do not disassemble the electric lever.
If it is disassembled, the output voltage
characteristics and operating effort
characteristics will need to be adjusted.
1. Boot
2. Bracket
3. Plate
KAP
KAPTraining
TrainingCentre
Centre
PCCS lever (for steering)
KAP
KAPTraining
TrainingCentre
Centre
PCCS lever (for steering)
2. Output voltage characteristics
KAP
KAPTraining
TrainingCentre
Centre
Sensor
KAP
KAPTraining
TrainingCentre
Centre
Sensor
Brake oil pressure sensor
(HST charge oil pressure sensor)
KAP
KAPTraining
TrainingCentre
Centre
Sensor
Hydraulic oil temperature sensor
1. Thermistor
2. Plug
3. Connector
1. Boss
2. Switch 4. Wire
3. Conduit 5. Connector
KAP
KAPTraining
TrainingCentre
Centre
Sensor
HST circuit oil pressure sensor
1. Sensor
2. Connector
KAP
KAPTraining
TrainingCentre
Centre
Sensor
Decelerator pedal potentiometer
Brake pedal potentiometer
1. Potentiometer
2. Connector
KAP
KAPTraining
TrainingCentre
Centre
Sensor
Fuel control dial
1. Knob
2. Dial
3. Spring
4. Ball
5. Potentiometer
6. Connector
KAP
KAPTraining
TrainingCentre
Centre
Sensor
Fuel level sensor
1. Connector
2. Float
3. Arm
4. Body
5. Spring
6. Contact
7. Spacer
KAP
KAPTraining
TrainingCentre
Centre
Sensor
Charge filter clogging sensor
The contact of charge filter clogging sensor detects the pressure before and
after the filter. When the difference in the pressure before and after the filter
exceeds the set level, the switch is turned ON.
1. Sensor
2. O-ring
3. Connector
KAP
KAPTraining
TrainingCentre
Centre
Sensor
Engine oil pressure switch
1. Connector
2. Sensor
3. O-ring
1. Connector
2. Sensor
3. O-ring
KAP
KAPTraining
TrainingCentre
Centre
Sensor
Boost pressure and temperature sensor
1. Connector
2. Sensor
3. O-ring
Water-in-fuel sensor
1. Connector 3. Sensor
2. Tube 4. O-ring
KAP
KAPTraining
TrainingCentre
Centre
The End
KAP
KAPTraining
TrainingCentre
Centre