Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 24 views

    1019-G3 Single Channel Gas Detection Card: Main Features

    Uploaded by

    Mahemehr Mehr
    The 1019-G3 card is a single channel gas detection interface card that accepts a 0-20mA input from gas detectors. It has a 3-digit display, bar graph, and LED indicators to show readings and alarm thresholds. The card monitors input signals, allows setting of high/low alarms, and provides a corresponding 0-20mA output. It is designed for mounting in a 19" rack and connecting to external devices.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    1019-G3 Single Channel Gas Detection Card: Main Features

    Uploaded by

    Mahemehr Mehr
    24 views2 pages
    The 1019-G3 card is a single channel gas detection interface card that accepts a 0-20mA input from gas detectors. It has a 3-digit display, bar graph, and LED indicators to show readings and alarm thresholds. The card monitors input signals, allows setting of high/low alarms, and provides a corresponding 0-20mA output. It is designed for mounting in a 19" rack and connecting to external devices.

    Original Title

    1019_G3_card_datasheet

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The 1019-G3 card is a single channel gas detection interface card that accepts a 0-20mA input from gas detectors. It has a 3-digit display, bar graph, and LED indicators to show readings and alarm thresholds. The card monitors input signals, allows setting of high/low alarms, and provides a corresponding 0-20mA output. It is designed for mounting in a 19" rack and connecting to external devices.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    24 views2 pages

    1019-G3 Single Channel Gas Detection Card: Main Features

    Uploaded by

    Mahemehr Mehr
    The 1019-G3 card is a single channel gas detection interface card that accepts a 0-20mA input from gas detectors. It has a 3-digit display, bar graph, and LED indicators to show readings and alarm thresholds. The card monitors input signals, allows setting of high/low alarms, and provides a corresponding 0-20mA output. It is designed for mounting in a 19" rack and connecting to external devices.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    www.fenwal@fenwal.

    it

    1019-G3 Single Channel Gas Detection Card


    Card mod.1019/G3, is a single channel gas detection card which accept 0-20mA input. It is equipped with 3-
    digits display and bar-graph to allow the actual reading of the sensors/transmitter output.
    It can be used as interface for toxic gas detectors (ppm), combustible gas detectors (%L.E.L.) or oxygen
    depletion (%).

    MAIN FEATURES
    § Microprocessor technology
    § LED’s for alarms/status indication.
    § 3-digits display with selectable range through INPUTS/OUTPUTS
    dip-switches as follws: 0-20 mA Input
    ü 0-10 ppm 0-20 mA Output
    ü 0-20 ppm
    ü 0-25 % O2
    ü 0-50 ppm FRONT PANEL
    ü 0-100 ppm or % L.E.L. Led’s indication (F= steady, I= intermmittent).
    ü 0-200 ppm
    ü 0-500 ppm SET + and – push buttons
    ü 0-999 ppm
    § 0-100% end-of-scale bargraph By simultaneously depressing
    § On board self-checking functions the two push button for:
    § Std. 19” 3HE mounting with locking screw. less than 5 sec’s
    § Dip switches address setting. lamp test
    § Different working modes selectable through Dip more than 5 sec’s
    switches. alarm thresholds set.
    By using the push buttons +
    and – the alarm’s set point
    OPERATION will be increased/decreased.
    The 1019 G3 controls one 0-20mA input from gas ALARM
    detectors/transmitters. I Alarm threshold visualisation
    It is equipped with 3-digits display and bar-graph to during setting phase.
    allow the actual reading of the sensors/transmitter F Alarm (2nd threshold)
    output. A further 0-20mA output is also provided PREALARM
    which corresponds to the sensor/transmitter I Alarm threshold visualisation
    reading. during setting phase.
    Two alarm thresholds can be set in the whole F Alarm (1st threshold)
    reading range (prealarm, alarm); both of them are RESET
    visulised on card front panel by means of LED’s. Card working mode
    The alarms can be used by the 1019 CPU to I During thresholds set
    activate other system’s outputs through the F Card disabled or during
    configuration software. remote programming

    A MEMBER OF KIDDE PLC


    FENWAL IS A REGISTERED TRADE MARK OF KIDDE FENWAL INC.
    TECHNICAL CHARACTERISTICS WIRING
    The card is equipped with terminal’s
    Model 1019 G3 board connected to the 1019 I/O rack
    Part Number SCH 1019/G3-XX (*) by means of a flat cable.
    Customized further terminal strip can
    Voltage 22-28 Vdc also be provided.
    Stand-by: 70 mA

    Current Consumption In test: 90 mA


    Alarm: 80 Ma

    Input 0-20 mA
    Output (2-wires) 0-20 mA
    Outputs activation Programmable
    Working temperature -10°C +50
    Storage temperature -30° C + 70° C
    Humidity (UR%) 95% non condensata
    Color Ral 9002
    Weight 90 g
    Dimensions (height std. 19” rack
    L. 25 mm P. 150 mm
    3HE)
    (*)NOTE: Indicates revision index

    TYPICAL WIRING DIAGRAM

    You might also like