Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Bosch Ic cr665

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Automotive Electronics

Automotive Electronics | CR665 Alternator Regulator with LIN-Interface

Product Information
CR665 – Alternator Regulator with LIN-Interface

Features
 Precise voltage control of 14V automotive synchronous
alternators
 High-side DMOS regulates dynamo field (DF) by fixed
frequency PWM
 Full DF duty cycle range 0% to 100%, no compromise
 Integrated active freewheeling MOSFET on DF
 Applicable for any pole pair count. 6, 7 and 8 as default
 Voltage set point trimmed in production
 Examples for LIN communication in operation:
o Write: Set voltage, excitation current limitation, speed
thresholds, load response parameters, behavior at
high temperature
o Read: Filtered duty cycle, excitation current, various
internal measurement values and status flags
 Examples for customer end of line programming:
o ID, defaults for functions like load response, offsets
Customer benefits:
 Active handling of load dump and over-voltage
 Very low stand-by current
 Fully integrated alternator regulator  No data loss down to 4V
 LIN single wire bi-directional interface to motor  Accepts jump start with 28V
control unit
 ±8kV ESD handling robustness on all pins (HBM)
 Advanced load response behavior
 Small TO220-5 package or tiny bare die Communication features:
 TO220-5 ready for welding  LIN2.1 conformant physical interface to MCU
 Compliant to VDA (German Car Makers  LIN2.1 and LIN 1.3 compatible data link layer
Association) alternator regulator standard
 Customer end of line programming via COM pin
 Customer end of line programming options exceed
VDA, ready for worldwide application TO220-5 package pin list

Pin Function
Functions to protect alternator and battery:
1 DF+ Dynamo field high side driver
 Emergency start via V pin and default operation if COM
2 B+ Battery
(LIN) pin is disconnected or shorted to B+ or GND
3 GND Alternator ground terminal
 Continuous B+ measurement and appropriate response
 Power stage shutdown at extreme temperature 4 COM LIN communication terminal
 Short circuit protection on COM and DF power stage 5 V Alternator phase terminal
Automotive Electronics | CR665 Alternator Regulator with LIN-Interface

TO220-5 package from top Key parameters

Parameter min max

Voltage set range by LIN VSET V 10.6 16

Voltage set 4 step default VSET V 13.7 14.6

Operating supply voltage VB+ V 6.5 18

Supply with no data loss VB+ V 4 37

Transient over-voltage VB+ V 57


t<0.5s

Field driver on-resistance Ron mΩ 70


typ. at 25°C / 8A

Standby current ISTB


μA 100
typ. incl. power stages Y

Load resp. cut-off range nLR rpm 2400 8000


Option:always on

DF duty cycle range % 0 100


Application Diagram

LIN
Master 15

B+

Field
LIN control DF G
COM
3~
Stator
Field coil
Phase
input
CR665 V

GND Rectifier Battery Load


Alternator

Regional sales contacts Robert Bosch GmbH


Europe/Japan bosch.semiconductors@de.bosch.com AE/MKC
USA/Canada bosch.semiconductors@us.bosch.com
Postfach 13 42
China bosch.semiconductors@cn.bosch.com
Korea bosch.semiconductors@kr.bosch.com 72703 Reutlingen
Germany
www.bosch-semiconductors.com
www.bosch-sensors.com www.bosch.com

© Robert Bosch GmbH 03/2014. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications
for industrial property rights. The information provided is for information purposes only and does not constitute a legal obligation or a warranty, express or implied,
concerning quality, marketability or suitability for a specific purpose. The designs incorporated in vehicles and the performance of the designs may vary depending on
the vehicle manufacturer's specifications and requirements for the product. We reserve the right to make product changes, adaptations and modifications without prior
notice.

You might also like