Professional Documents
Culture Documents
1614327061096-Objective Questions On Workshop Trade Theory MWT-04
1614327061096-Objective Questions On Workshop Trade Theory MWT-04
1 of 15 | P a g e
7. Full form of Dy.CMM
a) Deputy Chief Manpower Manager
b) Direct Chief Manpower Manager
c) Deputy Chief Material Manager
d) None of these.
24. What is Codal life of steel bodied coaches (Including dining / pantry cars) -
(a) 40 years
(b) 30 years
(c) 25 years
(d) 22 years
25. Codal life of light utilization categories of coaches is -
(a) 40 years
(b) 30 years
(c) 25 years
(d) 20 years
26. All newly built coaches shall be given IOH after -
(a) One month
(b) six month
(c) one year
(d) two year
4 of 15 | P a g e
27. Over all width of ICF/ RCF coach is -
(a) 3251 mm
(b) 3250 mm
(c) 3245 mm
(d) 3991 mm
5 of 15 | P a g e
32. Height over roof of LHB coach is
(a) 4039 mm
(b) 4025 mm
(c) 4026 mm
(d) 4047 mm
33. What is the length over buffer of LHB coach?
(a) 2444 mm
(b) 2424 mm
(c) 22100 mm
(d) 24000 mm
34. Which bogies are provided for higher passengers ride index comfort?
(a) ICF (all coil)
(b) IRS type
(c) BEML type
(d) Fiat –SIG type
35. How much length of LHB coach is increased in compression of ICF coach?
(a) Appx-2.0 meter
(b) Appx-3.0 meter
(c) Appx-1.5 meter
(d) None of the above
6 of 15 | P a g e
38. The roof seat, side wall seat and end floor seat are fabricated of –
(a) Cast steel
(b) Silicon steel
(c) Mild steel
(d) Stainless steel
42. How many speed sensors have been provided in LHB coaches wheel?
(a) Two
(b) Three
(c) Four
(d) Five
7 of 15 | P a g e
43. The capacity of air reservoir of LHB coach is –
(a) 125 litre
(b) 150 litre
(c) 175 litre
(d) 200 litre
45. At what interval for IOH (SS-I) of all type LHB coach?
(a) One month±15 days
(b) Three monthly±15 days
(c) Six monthly ± 15 days
(d) Yearly ± 30 days
46. At what interval for POH (SS-II & SS-III) of all type LHB coach?
(a) Two yearly ±60 days
(b) Three monthly±30 days
(c) Six monthly ± 30 days
(d) Yearly ± 60 days
8 of 15 | P a g e
48. Which type of Roller bearing is used in LHB coaches?
(a) Spherical Roller bearing.
(b) Plain Roller bearing.
(c) Cartridge Tapered Roller bearing.
(d) None of these.
49. Who is responsible for the examination of coaches & Wagons after POH & ROH
a) NTXR
b) Depot incharge
c) CWM
d) None of these.
9 of 15 | P a g e
53. Coaches are transfer in workshop by
a) Transformer
b) Traverser
c) Winch
d) none of these
10 of 15 | P a g e
58. Which of the following joint have high corrosion resistance?
a) Welding joint
b) Riveted joint
c) Bolted joint
d) None of the above
59. Single-V and single-U butt welds are used for sheets of thickness
a) upto 10mm
b) 5-15mm
c) 10-20mm
d) 15-25mm
60. Double-V and double-U butt welds are used for plates of thickness
a) 1-5mm
b) 5-10mm
c) 10-15mm
d) Over 15mm
72. The maintenance practice for machines and equipment adopted in workshop are:
a) Break down maintenance
b) Preventive maintenance
c) Condition based maintenance
d) All of the above
75. The wheel is better understood by dividing it into the following parts
a) Hub
b) Disc
c) Tyre
d) All of the above
76. Hub is the centre portion of the wheel, where the wheel is fixed to the axle by
means of interference fit.
a) True
b) False
78. The profile of the tyre is significant for safe running of the trains.
a) True
b) False
79. Taper is given on the tread to have higher diameter near the flange and lower
diameter at the outer edge, to facilitate curve negotiation.
a) True
b) False
80. Measurable wheel defects arising due to normal wear & tear during service
a) Thin flange
b) Deep flange
c) Sharp flange
d) All of the above
81. Thermal cracks appear on a wheel tread due to intense heating of the wheel
arising out of severe brake binding.
a) True
b) False
13 of 15 | P a g e
83. Axle having notch should be withdrawn from service
a) True
b) False
84. No repairs, except wheel profiling of wheel sets is permitted to be done in the
maintenance depot.
a) True
b) False
85. While tyre turning, it should be ensured that variation on the same axle is within
0.5 mm
a) True
b) False
89. The swing diameter over the bed is the largest diameter.
a) True
b) false
15 of 15 | P a g e