MI L- A- 22771D

30 J anu~rv 1984
SUPERSEDI ~G
kl I L- A- 22771C
25 August 1969
ALUMI NUM ALLOY FORGI NGS, HEAT TREATED
Thi s speci f i cati on i s approved f or use by al l
Departments and Agenci es of the Department of
Def ense.
1. SCOPE
1. 1 Scope. Thi s speci f i cati on covers the requi rements f or heat treated
al umi num al l oy di e f orgi ngs, hand f orgi ngs, and ri ng f orgi ngs, produced under
addi ti onal mechani cal property control to ensure known mechani cal properti es f or
parts used i n aerospace cri ti cal appl i cati ons. Thi s speci f i cati on al so covers
the requi rements f or f orgi ngs f urni shed i n the F or 01 condi ti ons whi ch wi l l
ul ti matel y be used i n the heat treated condi ti on.
1. 2 Cl assi f i cati on. The al umi num al l oy f orgi ngs shal l be f urni shed i n the
f ol l owi ng al l oys, tempers and f orms, as speci f i ed ( see 6. 2. 1) :
1, 2. 1 Al l oys and tempers.
2014- F, 01, T6, T652 6061- F, 01, T6, T652 7049- F, 01, T73, T7352
2219- F, 01, T6, T852 6151- F, 01, T6, T652 7050- F, 01, T74, T7452
2618- F, 01, T61 7075- F, 01, T6, T652. T73,
T7352, T74, T7452
7175- F, 01, T74, T7452,
T7454
1. 2. 2 Form. Forgi ngs sha! l be f ur~i ~hed i n the f orm of di e f orgi ngs, hand
f orgi ngs or ri ng f orgi ngs. I f the f orm i s not speci f i ed, manuf acturers may use
any f orm of f orgi ng most conveni ent.
2. APPLI CABLE DOCUMENTS
2. 1 Governmen.+ documents.
i NO DELI VERABLE 9ATA i ?EQUI RED I
- -.. - - -____
I
3 f THI S 00CLJ MENT
1
-.p - - .- .-
-----
t41L- A- 22771D
SPECI FI C4TI GNS
MI L- H- 6088
MI L- I - 6866
MI L- S- 13165
MI L- I - 25135
STANDARDS
FEDERAL
FED- STD- 151
MI LI TARY
MI L- STD- 41O
r141L- STD- 649
MI L- STD- 1537
MI L- STD- 2154
Heat Treatment of Al umi num Al l oys.
I nspecti on, Penetrant Method of
Shot Peeni ng of Metal Parts.
I nspecti on Materf al s, Pef wtrant.
Metal , Test Methods.
) l onde~tructl ve Testi ng Personnel Qual i f i cati on and
Certtf l cati on ( Eddy Current, Li qui d Penetrant,
Magneti c Parti cl e, Radi ographi c and Ul trasoni c) .
Al umi num and Magnesi um Products, preparati on f or
Shi pment and Storage.
El ectri cal Conductl vl ty Test f or Measurement of Heat
Treatment of Al umi num Al l oys, Eddy Current Method.
I nspecti on, Ul trasoni c, Hrought Metal s, Process f or.
( Coni es of sDecl f i catl ons and standards requi red by manuf acturers i n connecti on
wi th- speci f i c acqui si ti on f unctf ons shoul d be obtai ned f rom the contracti ng acti v-
i ty or as di rected by the contracti ng of f i cer. )
2. 2 Other publ i cati ons. The f ol l owi ng documents f orma part of this speci f i -
cati on to the extent specl f l ed nerel n. The i ssues of the documents whi ch are i n-
di cated as DoD adopted shal l be the I ssue I l sted I n the current DoOI SS and the
suppl ement thereto, i f appl f cab~e.
AMERI CJ 4NSOCI ETY FOR TESTI NG AND MATERI ALS ( ASTM)
ASTM 9 557 - Tensi on ~esti ng Wrought and Cast Al umi num- and Magnesi um- Al l oy
Products.
ASTM G 47 - Determi ni ng Suscepti bi l i ty to Stress- Corrosi on Cracki ng of
Hi gh Strength Al umi num 4I 1oY products.
( Appl i cati on f or cooi es snoul d be addressed tc the Ameri can Soci ety f or Testi ng
and Materi al s, 1916 Race Street, ?hi l adel phl a, PA 19103. )
( I ndustry associ at; cn spec: =i catl ons and s: ancards are general l y a ~~~l abl ef cr
ref erent? f rom I i brar. es. They are ai sc di str i ~uted amng : echni cal groups and
usi ng ~edera; agenci es. )
2. 3 ~- der of precedence. i n the event of a ccnf l i ct be: ween The : ?xt 3? the
saecj f i ca: i on and the r- ef erenc?s ci ted aer~i n. the Text of ; hi s ; r) ec;=i cat: on
- 1: ; I nd
: a~~
precedence
3. ?EWI ?E! 4ENT

MI L- A- 22771D
3. 1 Chemi cal composi ti on. The chemi cal camposi ti cn of the f orgi ngs shal l be
as speci f i ed i n Tabl e I ( see 4. 4. 1) .
3. 2 Heat treatment. Unl ess otherwi se speci f i ed, f orgi ngs shal l be neat
treated i n accordance wi th MI L- H- 6088. Forgi ngs of al l oy 7175 shal l be heat
treated i n a manner that the heat treated f orgi ngs shal l conf orm to al l the
requi rements of thi s speci f i cati on ( see 6. 1, ! 0) , Di scol orati on due to heat
treatment shal l not be cause f or rej ecti on.
3. 3 Mechani cal properti es.
3. 3. 1 Di e f orqi ngs. Mechani cal properti es of di e f orgi ngs as determi ned i n
accordance wi th 4. 4. 2 shal l conf orm to the appl i cabl e properti es speci f i ed i n
Tabl es 11 and I I I . kJ hendi e f orgi ngs are machi ned bef ore heat treatment to si zes
wi thi n the maxi mum secti on thi ckness speci f i ed i n Tabl es 11 and 111, the
mechani cal properti es i n these tabl es are appl i cabl e, provi ded the as- f orged
thi ckness shal l be not more than twi ce the heat treated thi ckness. For as- f orged
thi ckness greater than twi ce the heat treated thi ckness, the properti es shal l be
as agreed between the contractor and the f orgi ng suppl i er or between tne
acqui ri ng acti vi ty and the f orgi ng suppl i er or contractor ( see 6. 2. 1) .
3. 3. ?. 1 Mechani cal property control of f i rst producti on parts. Af ter f or$i ng
techni ques have been establ i shed, a f orgi ng representati ve of the f i rst producti on
parts shal l be tested. Tensi l e test speci mens shal l be taken f rom l ocati on both
i n the di recti on paral l el to, wi thi n + l SG of f l ow l i nes, and not naral ] el to the
f orgi ng f l ow l i nes. The speci men l oc~ti on shcul d be i ndi cated on ~he f orgi ng
engi neeri ng drawi ng. I f the speci men l ocati ons are not i ndi cated on the f orgi ng
engi neeri ng drawi ng, they shal l be taken f rom areas representati ve of thi ck and
th~n secti ons. The f l ow l i nes shal ! be determi ned as speci f i ed i n 4. 4. 7. The
mechani cal properti es shal l be as speci f i ed i n Tabl e I I and I I I . For f orgi ngs
too smal l to yi el d sui tabl e test speci mens, the tensi on test shal l be wai ved or
negoti ated between rne contractor and the f orgi ng suppl i er or between the
acqui ri ng acti vi ty and the f orgi ng suppl i er or contractor ( see 6, 2. 1) . Thi s
mechani cal property control shal l be repeated af ter any maj or change i n the
f orgi ng process, f orgi ng stock si ze or f orgi ng stock.
3. 3. 1. 2 Mechani cal property control of producti on parts. Sampl es f or
mechani cal properti es of producti on l ots subsequent to the f i rst producti on l ot
shal l be taken as speci f i ed i n 4. 3. 2. 2. 2 and shal l conf arm to the requi rements of
Tabl e I I and I I I .
3. 3. 2 Hand f or~i ngs. The mechani cal prcpert: es of and f orgi ngs as
determi ned ~n accordance wi th 4. 4. 2 shal l conf orm to the appl i cabl e properti es
speci f i ed i n Tabl e I V. The properti es speci f i ed i n Tabl e l V appl y to hand
f orgi ngs that are essenti al l y rectangul ar i n cross \ ect! cn. The requi rement of
l ong transverse and short trans~erse properti es appl i es a; so to squares, even
though transverse di mensi ons are equal . The f orgi ng ?rcce: s shal l be control l ed
such that, the l ong transverse di recti m shal l be per~endi cti l ar to the ori gi ns?
stock axi s, or both short transverse or l ong tran~verse ~rooerti es shal l meet the
l ong transverse properti es requi rements. The d~rec: i on of the l ong transverse
properti es shal l de i denti f i ed as speci f i ed i n 3. 8, ~or f orqi n~j too small t:
yi el d sui tabl e test speci mens, The merf i odof tens l e ~e>t ; f i al l be Wai ; edor
negoti ated bet~ee~ tne con: ract~r and Fcrgi ng >uc~l i e. or het~een zne ac~u: - - ;
acti vi ty and the f cr~i ng su~pl : er or con~ractor ~cee 5 L 1i
MI L- A- 22771D

3. 3. 2. 1 Large hand f orgi ngs. For hand f orgi ngs ( 1) of greater thi ckness or
( 2) heat treated i f i seczl on thi ckness greater than covered by thi s speci f i cati on,
or ( 3) when the purpose of condi ti ons under whi ch the f orgi ng i s to be USed so
dictates, the requi rements shal l be as spec~f i ed i n the contract, order or
drawi ng. I n such cases, the mechani cal properti es of test speci mens taken f rom
~oc~t~on~ i ndl ~a~ed on
the drawi ng $hal ! be as speci f i ed i n the ccntract, order
or drawi ng ( see 6. 2. 1) .
3. 3. 2. 2 I - chi ned hand f orgi ngs. When hand f orgi ngs are machi ned before heat
treatment, the secti on thi ckness at ti me of heat treatment shal l determi ne the
mi ni mum mechani cal properti es as l ong as the ori gi nal ( as f orged) thi cl cness does
not exceed the maxi mum thi ckness f or the al l oy as shown i n Tabl e I V. 14henthe
maxi mum thi ckness i n Tabl e I V i s exceeded by not more than 3 i nches, the
appl i cabl e thi ckness to estabi i sh properti es shal l be not l ess than hal f the
ori gi nal f orged thi ckness.
3. 3. 3 Speci al purpose f orgi ngs. Bi scui ts, octagons, mandrel ri ng; and contour
hand f orgi nqs shal l be cl assi f i ed as speci al purpose f orgi ngs. Mechani cal proper-
ti es of ; pe~i al purpose f orgi ngs shal l be as negoti ated between the contractor
and the f orgi ng suppl i er or between the acqui ri ng acti vi ty and the f orgi ng
suppl i er or contractor ( see 6. 2. 1) . Testi ng to conf i rm mechani cal properti es
shal l be i n accordance wi th 4. 4. 2.
3. 3. 4 Rol l ed ri nq f orgi ngs. The mechani cal prcoerti es of rol l ed ri ng f orgi ngs
shal l be determi ned i n accordance wi th 4. 4. 2 and shal l conf orm to appl i cabl e
properti es speci f i ed i n Tabl e V. For f orgi ngs too smal l to yi el d sui tabl e test
speci mens, the method of tensi l e test shal l be wai ved or negoti ated between the
contractor and the f orgi ng suppl i er or between the acaui ri ng acti vi ty and the
f orgi ng suppl ! er or contractor ( see 6. 2. 1) .
3. 3. 5 Forgi ng suppl i ed I n r or 01 condi t~ons. The mechani ca! properti es
of f orqi nqs Supp] ! ed i n F or 01 condi ti ons shal l meet the requi rements cf
Tabl es- l l ~ I I I , I V and V, or as requi red by drawi ng or contract order when heat
treated to speci f i ed tempers i n accordance wi th MI L- H- 6088.
3. 4. 1 Resi stance to stress- corrosi on cracki ng. FCrgl ngs of al l oys 7049, 7 350,
7075 and 7175 suppl i ed I n the T73, T735Z, T74,
T745~ and T7454 tempers shal l meet
the f ol l owl ng acceptance cri teri a, as appl i cabl e, and shal l exhi bi t no evi dence of
stress- corrasi on cracki ng when subj ected to test specified i n 4. 4. 8.
3.4.2 Ac[ eutanc~ cri teri a
or stress- corrosi on cracki na by conducti vi ty test.
The capabi i i ~y of i ndi vi dual : ots ( see 4. 3. 1) to resi st stress- corrosi on cracKl nq
: hai l ! ) eaetewmi ned b: ~testi ng aS specf f i ed i n 4. 4. 9, and us~nq the acceptance
~ri ~~ri a
s~ec; ~: ed 3S fO!~CWS or the aDpi i caDi e al uml num a~~cy and : ?mper.
3. 4. 2. 1 7049- T73 and 7049- T7352. The acceptance cr! rer: a or roe 7049- T73 ~nd
7049- 77352 di umi num a; i oy f ~rgi ngs shd]] be dj fG~lowS:

! I I L- A- ?Z771D
b. I f the el ectri cal conducti v ry i s 38. 0 to 39. 9 percent I ACS, I ncl usi ve,
and the l ongi tudi nal yi el d strength doe$ not exceed the speci f i ed mi n-
imum by more thar, 9, 9 ksi , the l ot i s acceptabl e.
c. I f the el ectri cal conducti vl tj i ; 38. 0 to 39. 9 percent IACS, i r?cl usi ~e,
and the l ongi tudi nal yi el d ctrengtn exceeds the speci f i ed mi ni mum by
10. 0 k$i or more, the l ot i s acceptabl e provi ded i t passes the stre~s-
corrosi on test speci f i ed i n 4. 4. 8.
d. I f the el ectri cal conducti vi ty i s l ess than 38. @ percent I ACS, the l ot
i s unacceptabl e.
3. 4. 2. 2 7050- T74 and 7050- T7452. The acceptance cri teri a f or the 7050- T74
and 7050- T7452 al umi num al l oy f orgi ngs shal l be as f ol l ows:
a. I f the el ectri cal conducti vi ty ~~ 38. 3 percent I ACS or greater and the
l ongi tudi nal ! Yie]d strength {<X. X ksi ) mi nu~ the el ectri cal conduct-
i vi ty ( XX. X percent I ACS) i ~ equal to ar l ess than 32. 0, the l ot i s
acceptabl e. For di e f orgi ngs ~nl y, the maxi mum yi el d strength shal l
al so be 72 ksi .
b. I f the el ectri cal conducti vi ty i s 38. 0 percent I ACS or greater and the
l ongi tudi nal yi el d strength ( XX. X ksi ) mi nus the el ectri cal conduct-
i vi ty ( XX. X percert I ACS) i s greater than 32. 0, the l ot i s acceptabl e
provi ded i t passes the stre~s- corrosi on te~~ speci f i ed i c 4. 4. 8.
c. I f the el ectri cal conaucti vi ry i s l ess than 38. 0 percent I ACS, the l ot
i s unacceptabl e.
3. 4. 2. 3 7075- T73, 7075- T7352, 7075- T74, 7075- T7~52, 7175- T74, 7175- T7452 and
7175- T7454. =e acceptance cri teri a f or the 7075- T73, 7075- T735Z, 7075- T74. - -
.. -
7075- T7452, 7175- T74, 7i 75- i / 4S2 and 7175- T7454 al umi num al l oy f orgi ngs shal l be
as f ol l ows:
a. I f the conducti vi ty i s 40. 0 Dercent I ACS or hi gher and tensi l e proper-
ti es meet the mi ~i mum val ue< speci f i ed herei r?, the f orgi ngs shal l be
consi dered sati sf actory.
b. I f the el ectr~cal conducti v : : ~ i s 38. 0 to 39. 9 percent I ACS, i ncl uj i ve,
i f tensi l e properti es meet the mi ni mum I i mi t$ speci f i ed herei n, and the
l ongi tudi nal yi el c strength does not e~ceed the speci f i ed mi ni mum by
more than 11. 9 ksl . the f ~rgi ngr shal l be consi dered ~ati sf actory.
c. I f conducti vi ty i ~ bel ow 40. 0 ~ercect I ACS arc! the l ongi tudi ~al ~i e; l j
+he speci f i ed mi ri mum val ue by 12. 00 ksi o~ r! ?ors,the strength exceeds .
l ot i s unacceptabl e.
3. 5 Detects.
.
I 1 I I
MI L- A- 22771D

3. 5. 2 I nternal def ects. Li mi ts of acceptabi l i ty f or ul trasoni c i nspecti on

shal l be i n accordance wi t! ? MI L- STD- 2154, Cl ass A f or hand and ri ng f orgi ngs
~d Cl ass B f or di e f orgi ngs, unl ess l i mi ts f or acceptabi l i ty of f i ni shed
f orgi ngs are otherwi se speci f i ed. \ / heref orgi ng thi ckness or conf i gurati on will
not permi t ul trasoni c i nspecti on, the f orgi ng stock sha?l be ul trasoni cal l y
i nspected to Cl ass A l i mi ts as agreed upcn by the contractor and the f orgi ng
suppl i er. Nhen di e f orgi ngs are to be used i n appl i cati ons requi ri ng a qual i ty
l evel hi gher than cl ass B l i mi ts, or f or al l oys not cavered heref n, the
r~qui rements shai l be negoti ated among the contractor, f orgi ng suppl i er and
acqui si ti on authori ty ( see 4. 4. 6 and 6. 2. 1) .
3. 6 Grai n- f l ow characteri sti cs, The grai n- f l ou pattern shal l conf orm to
speci f i ed f orgi ng drawi ng apprwd by the acqui ri ng acti vi ty ( see 6. 2. 1) .
Precauti on shoul d be taken to auoi d si mul taneous occurrence of sharpl y re- entrant
f l ow l i nes and hi gh tensi l e str+sses i n the regi on of the parti ng
and 6. 2. 1) .
3. 7 Tol erances. The f orgi ngs shal l conf orm to the shape and d
speci f i ed i n the contract or purchase order wi thi n such vari ati ons
shown on the drawi ngs ( see 6. 2. 1) .
i n; ( see 4. 4. 7
mensi ons
as may be
3. 8 Marki ng of f orqi nqs. Forgi ngs shal l be marked wi th the commerci al al l oy
desi gnati on and temper, ul trasoni c symbol and the basi c speci f i cati on number i n
characters that are cl earl y l egi bl e and that shal l not be obl i terated by ordi nary
handl i ng. For squares, the marki ng shal l be on the f ace that i s paral l el to the
di recti on of the l ong transverse properti es but perpendi cul ar to the di recti on of
short transverse properti es. The marki ng shal l not be a~pl i ed by the i mpressi on
method, cr by an el ectroetch or engravi ng method, unl ess i t can be determi ned that
al l detri mental ef f ects wi l l be removed by subsequent machi ni ng. Hhen speci f i ed
<see 6. 2. 1) , the marki ng of the commerci al al l oy des~gnati on, temper and basi c
speci f i cati on number shal l be conti nuous al ong the f orgi ng l ength ( see 4. 4. 3) .
3. 9 Workmanshi p. The f orgi ngs shal l be of uni f orm f orgi ng qual i ty and
condl tl on, f ree f rombl i sters, f i ns, f ol ds, seams, l aps, cracks, segregati ons,
spongy areas or other def ects whi ch would adversel y af f ect thei r servi ceabi l i ty.
Apparent surf ace def ects may be removed as requi red, provi ded secti on thi cknesses,
as def ! ned by the drawi ng, can be mai ntai ned. Forgi ngs shal l not be repai red by
pl uggi ng or wel di ng.
4. QUALI TY ASSURANCE ?ROVI SI ONS
4.1 Responsi bi l i ty f or i nspecti on. Unl ess otherwi se speci f i ed i n the ccnl ract
or purchase order, the contractor i s responsi bl e f or the perf ormance of al l
i nspecti on requi rements as speci f i ed herei n. ExceDt as otherwi se spec! f i ed i n
the contract or ourcnase Order, the contractor may use hi s own or any orher
f aci l i ti e~ 5u ~301e or : ?e zer~or~anc? of the i ri ; aecti onrequi rements sneci = , ed
Terei n, UfIl?SS disaptlroved Oy tne Government. The Government reserves the r; g~t
to perf orm any of the i nspecti ons set f Grtn i n the speci f i cati on where Gu: h
i nspecti ! ) nssre 5eemed neces: ~r: ~: I ?assur~ sucpl l es and servi ces conf orm TO
~re~cri bed
2cu TemenT2.
.
~1- - - , =r~- r~-
4. - . n : f nsnec: ; cns. he i 7saecti 5n reuui rsments specl = sd +!C2: -3-
nere v aye
: : ; : : : - - ; ~, ~~~
: U2! 1: / : cn=~rnance ns~ec; ~: n: , : 2Q 4. 3 thrcugn
1~~
. - . 4. 5) .
.
,.
J IIL
MI L- A- 22771D
4. 3 Sampl i ng. Sampl i ng f or each i nspect~cn shal l be i n accordance wi th
4. 3. 2. 1 through 4. 3. 3, S, as appl i cabl e. Unl ess otherwi se speci f i ed, tne samp?e
uni t shal l be one f i ni shed f orgi ng and f or Secti on 5 i nspecti on, one contai ner
ready f or shi pment.
4. 3. 1 Lot. A l ot shal l consi st of f orgi ngs of the same shape, same si ze,
same al l oy, and heat treated and aged i n the same f urnace charge. I f f orgi ngs
are heat treated \ n a conti nuous f urnace, f orgi ngs charged consecuti vel y duri ng
conti nuous operati on of the f urnace shal l be consi dered a f urnace charge; f or
such f orgi ngs wei ghi ng f i ve pounds or l ess, the maxi mum wei ght of a l ot shal l be
2, 000 pounds, and f or l arger f org~ngs, i t shal l be 6,000 pounds.
4. 3. 2 Tests.
4. 3. 2. 1 Chemi cal composi ti on. The sampl i ng f or chemi cal anal ysi s shal l be
i n accordance wi th 4. 3. 2. 1. 1 and 4. 3. 2. 1. 2.
4. 3. 2. 1. 1 I nqot anal ysi s. At l east one sampl e shal l be taken f rom each l ot
of i ngots of the same al l oy poured si mul taneousl y f rom the same source of mol ten
metal by the producer and anal yzed to determi ne conf ormance to 3. 1. I ngots not
conf ormi ng to thi s speci f i cati on shal l be rej ected. Compl ete i ngot anal ysi s
records shal l be mai ntai ned by the manuf acturer and shal l be ava~l abl e f or re : i ew
by the acqui ri ng acti vi ty at the produci ng pl ant.
4. 3. 2. 1. 2 Fl nl shed product anal ysi s. Unl ess compl i ance wi th 4. 3. 2. 1. 1 i s
establ i shed, one sampl e shal l be taken f or chemi cal anal ysi s f rom each 2, 000
pounds or f racti on thereof i n a l ot f or f orgi ngs havi ng nomi nal wei ght of f i ve
pnunds or less;
or one f or each 6, 000 pounds or f racti on therecf i n a l ot f or
f orgi ngs havi ng nomi nal wei ght over f i ve pounds.
4. 3. 2. 2. 1 Hand, rolled ri ng and speci al purpose f orgi ngs. Unl ess otherwi se
speci f i ed, one tensi on test speci men shal l be taken f rom each l ot I n each grai n
di recti on f or determi ni ng the mechani cal properti es. Speci men type and l ocati on
shal l be i n accordance wi th ASTM B 557. I f a prol ongati on i s used, i ts mi ni mum
di mensi on must not be l ess than the maxi mum heat treat secti on thi ckness of the
f orgi ng. Unl ess otherwi se speci f i ed, rol l ed ri ng f orgi ng secti ons shal l be taken
f rom an area representati ve of the center of mass where si ze permi ts.
4. 3. 2. 2. 2 Di e f orgi ngs. Unl ess otherwi se speci f i ed, tensi on test speci mens
shal l be taken f rom a f orgi ng or an i ntegral test couDon chosen to represent the
l ot. One test speci men shal l be taken so that the axi s of the speci men i : sub-
stanti al l y aaral l el to, wi thi n ~ 15, the di recti on of f crgi ng f l ow l i nes In the
f orgi ng. One addi ti onal test speci mens shal l be taken so that the axi s of the
spec
f org
4
4.
men i s not paral l el to the direction of the f orgi ng f l ~w l i nes i n the
ng, bei ng as cl ose to tne snort transverse di recti on as pcssi bl e.
3.3 Exami nati on.
3. 3. 1 Surf ace def ects.
-1
MI L- A- 22771O
4. 3. 3. 1. 2 Penetrant i nspecti on. Unl ess otherwi se speci f i ed, each f orgi ng
shal l be 100 percent penetrant i nspected ( See 4. 4. 5 and 6. 2. 1) .

4. 3. 3. 2 I nternal def ects. Unl ess otherwi se speci f i ed, a~~ f orgi ngs shal l be
ul trasoni cal l y] exami neG f or i nternal def ects ( see 4. 4. 6 and 6. 2. 1) .
4. 3. 3. 3 Grai n f l ow. Af ter the f orgi ng techni que I s establ i shed f or a requi red
si ze and shaDe cne sampl e fronr first production l ot shal l be se- l ectedf or the
grai n f l ow srructure exami nati on. Thi s exami nati on shal l be repeated af ter any
maj or change i n f orgi ng techni que ( see 4. 4. 7 and 6 . 2.1) .
4. . 3. 3. 4 Stress- corrosi on. Sampl i ng f or stress- corrosi on cracki ng and el ectri -
cal conducti vi ty i s appl i cabl e when testf ng f orgi ngs of al l oy temper combi nati ons
7049- T73, 7049- T7352, 7050- 174, 7050- T7452, 7075- T73, 7075- T7352. 7075- T74,
7075- T7452, 7175- T74, 7175- 17452 and 7175- T7454 f cr conf ormance to 3. 4. 1.
4. 3. 3. 4. 1 Stress- corrosi on survei l l ance test. Unl ess otherwi se speci f i ed,
each month, at l east one f orgi ng f romeach shape aml thi ckness range, 0. 7S0 I nch
and greater, produced duri ng that month f romf orgi ngs of al l oys and tempers noted
I n 4. 3. 3. 4, shal l be sampl ed f or stress- corrosi on testi ng. The sampl es shal l be
taken f rom the f orgi ngs determi ned to be acceptabl e ! n accordance wi th the l ot
acceptance cri teri a speci f i ed i n 3. 4. 2.
4. 3. 3. 4. ?
El e~tri cal conducti vi ty.
Unl ess etherwi se speci f i ed, one f orgi ng
f rom each l ot shal l be sel ected f or el ectri cal conducti vi ty test.
4.3.3.5 Heat treat capabi l i ty. Unl ess otherwi se speci f i ed, f or9i n9s i n F
and 01 condi ti ons shal l be sampl ed and tested I n the same manner as comparabl e
to heat treated f orgi ngs. The sampl e shal l be heat treated to the - T6 or - T61
temper, unl ess ctherw: se spec: f i ed. or to the f i nal temper as speci f i ed i n the
her acqui si ti on documents. part drawi ng or CL
4.4 Methods of tests and exami nati on.
4. 4. 1 Chemi cal anal ysi s. Samp~f ng f or chemi cal anal ysl s shal l i n accordance
wi th 4. 3. 2. 1. 1 and 4. 3. 2. 1. 2. The chemi cal anal ysi s of the sampl es shal l be wet
chemi cal method or spectro chemi cal method i n accordance wi th Method 111 or 112
of FED- STD- 151. I n case of d{s?ute, chemi cal anal ysi s by wet chemi cal method
shal l be the basi s f or acceptance ( see 3. 1) .
4. 4. 2 Mechani cal Properti es. The mechani cal properti es of the sampl es
sel ected i n accordance wi th 4. 3. 2. 2 thr~ugn 4. 3. 2. 2. 2 shal l be determi ned as
speci f i ed i n ASTM 6 557.
4. 4. 3 Exami nati on or marki ng. Unl ass otherwi se speci f i ed, each f orgi ng
shdi l be i nspectsd f or marki ngs as speci f i ed i n 3. 5.
! I I L- A- 2Z771D
a dash I n ni t r i c aci d or i n chromi c- sul phuri c aci d $oi uti on or other ~ol uti on
that shal l produce a ~urface of equi val ent sui tabi l i ty f or vi ~ua~ or penetrant
inspection. Af ter etchi ng, each forging sl-tall be i~~pected visually for ~u-face
def ects ~uch as seams, l aps, bursts and quencn cracks ( Lee 3. 5. 1) . Parts ~hou! d
be thoroughl y dr i ed af t er each etch dnd rirse :Peration to preven~ f l ui d
entrapment.
4. 4. 5 Pecetrant i ntoecti oc. Pri or to penetrant I nspecti on, each f orgi ng
. .
shal l be etched ( see 4. 4. 4) , ~ri ed ( see 4. 4. 4) and penetrant i nspected ( see
4. 3. 3. 1. 2) i n accordance wi th MI L- I - 6866, usi ng Group V post- emul si f i ed penetrant
or Group I V water washabl e penetrant of equi val ent sensi ti vi ty conf ormi ng to
MI L- I - 25135 to determi ne conf ormance to 3. 5. 1. Penetrant i nspecti on personnel
s- hal l be cert! f i ed to NOT Level I I i n accordance wi th MI L- STD- 41O.
4. 4. 6 I nternal def ects. Unl ess otherwi se speci f i ed, al l f orgi ngs ( see
4. 3. 3. 2) shal l be ul trasoni cal l y tested f or i nternal def ects i n accordance wi th
! I I L- STD- 2154.
4. 4. 7 Grai n f l ow. Af ter the f orgi ng techni que i t establ i ~ned f or f orgi ng a
requi red si ze and shape, a sampl e uni t f orgi ng, sel ected as speci f i ed i n 4. 3. 3. 3,
shal l be secttoned and sui tabl y etched to shoti the grai n f l ow of ~tructui e. Thi s
secti oni ng shal l be repeated af ter any change i n the f orgi ng techni que. Locati on
of cross secti oni ng shal l be such as to represent pri nci pal secti ons of the
f orgi ng, or as agreed upon between the cortractc) r ard the f orgi ng suppl l er or
between t!_Ie acquiring acti~ltj and the fcrging supp:ier :r contractor.
4. 4. 8 Resi stance to stress- corrosi on cracki r! ~. Speci mens of ai i oys a~d
tempers sDeci f i ed i n 4. 3. 3. 4, sel ected f or st~~s- corrosi on testi ng, shal l be
prepared and tested i n accordance wi th ASTM G 47. The stress- corrosi on test
stress l evel f or each al l oy temper combi nati on shal l be i n accordance wi th
4. 4. 8. 1.
4. 4. 8. 1 Stress- corrosi on test stress l evel . Unl ess otherwi se speci f i ~d, the
stress l evel shal l be 75 percent of the l orgf i udi nal yi el d ~trength as speci f i ed
i n Tabl es II and IV f or al l oys 7049 and 7075. The stress l evel f or 7050 al l oy
shal l be 35 ksi . The stress l evel of al l oy 7175 shal l be 35 k: i , e~cept f or
al l oy 7175 hand f orgi ngs Exceedi ng 3. 000 i nches, where the stress l evel shai l ES
50 oercent of the l ongi tudi nal yi el d ~trength speci f ! ed i ~ Tat) i e i L .
4. 4. 9 El ectri cal conductivi~. Forgings f or al ~oys and tempers sel ected CT
conducti vi ty testi ng ( see 4. 3. 3. 4. 2) shal l be orepared and testes i n acccdance
wi th WI L- STD- 1537 to the cri teri a speci f i ed i n 3. 4. 1. 1 thr~ucj h 3. 4. 2. 3.
a. Taki ng twi : a ~ne ori gi nal number ~~ test speci mens f rom an area i n
the or : gi n31 samcl e Qrgi ng ad;?ce~: to t he ar ea r e?~esent ed by t he
f ai l ure.
D. Taki ng the ori g~nal number of test saecimens f rom an area i n each
of two other f Grgi ngs i denti cal to the area i n the ori gi nal sampl e
f orgi ngs rz~resenred by t he f ai l ure.
c. Both f ai l i ng i ni ti al test data and passi ng retest data shal l be
, retai ned wi th the producti on records.
Shoul d any of these speci mens f ai l to conf orm to thi s speci f i cati on, the enti re
l ot shal l be rej ected.
5. PACKAGING
5.1 Preservati on, packi ng and marki nq. Preservati on, packi ng and marki ng
shal l be i n accordance wi tn MI L- STD- 64! 3. The l evel of preser~aticr? shall be
Level A or Commerci al anc packi ng shal l be Level A, B or Commerci al as speci f i ed
( see 6. 2. 1) .
6. NOTES
6. 1 I ntended use. The al umi num al l oy f orgi ngs of this speci f ! Cati On have
characteri sti cs that are i ntended f or use i n cri ti cal aerospace appl i cati ons, as
f ol l ows:
6. 1. 2 2219. Al l oy 2219 I s used f or appl i cati ons whi ch requi re gmd wel d-
abi l i ty and uni f ormi ty ef strength cf wel ds, moderate strength at room temperature
and hi gh strength i n the range of 500 to 600F.
6. 1. 3 2618. ~; i zy 2513 i s ~sed f ~r e! evated temperature ( appro~i matel y 57SF)
appl i cati ons.
MI L- A- 22771D
appl i cati on of thi s al l oy i n temper other than T73 because of suscepti bi l i ty to
stress- corrosi on cracki ng.
6. 1. 9 7075- T73. Al l oy 7075- T73 i s recommended f or components whi ch are sub-
j ected to assembl y stresses i n transverse di recti on because of i ts stress-
corrosi on resi stance.
6. 1. 10 7175. Al l oy 7175 i s recommended f or appl i cati ons requi ri ng hi gh
strength and resi stance to stress- corrosi on.
6. 2 Orderi nq data.
6. 2. 1 Acqui si ti on requi rements. Acqui si ti on documents shoul d speci f y the
f ol l owf ng:
a. Ti tl e, number and date of thi s speci f i cat i on.
b. Al l oy desi gnati on, temper, method of f orgi ng ( see 1. 2. 1 and 1. 2. 2)
and grai n- f l ow pattern, i f requi red ( see 3. 6) .
c. Appl i cabl e drawi ngs ( see 3. 3. 2. 1 and 3. 6) .
d. Appl i cabl e l evel s of preservati on and packi ng requi red ( see 5. 1) .
e. The percent of parts to be i nspected, when l ess than 100 percent
ul trasoni c i nspecti on i s requi red ( see 4. 3. 3. 2) .
f . Ul trasoni c i nspecti on acceptance cr~terl a, I f other than requi red by
3. 5. 2.
9.
The perc ent of parts to ~~ i nspec~ed, when l ess than 100 percent
penetrant i nspecti on of di e f orgi ngs i s requi red ( see 4. 3. 3. 1. 2) .
h. Speci al marki ngs ( see 3. 8) .
i. For speci al purposes and l arge f orgi ngs or any other opti ons desi red
( see 3. 3. 3 and 6. 3) .
i
For as- f orged thi ckness of di e f orgi ngs greater than twi ce the heat
treated thi ckness, the properti es shal l be wai ved or negoti ated
between the contractor and f orgi ng suppl i er or between the acqui ri ng
acti vi ty and the f orgi ng suppl i er Gr contractor ( see 3. 3. 1) .
K. For f orgi ngs tw smal l to yi el d sui taoi e test speci mens, The tensi on
test shal l be wai ved or neqoti at?d between the contractor anc f orgi ng
suppl i er or between the accui ri ri g acti vi t$ and t he f orgi ng suppl i er
or contractor ( see 3. 3. 1. 1, 3. 3. 2 and 3. 3. 4) .
6. 3 Speci al t) urcoses and l arge f crqi cgs. Attenti on i s cal l ed to the
ef erences herei n to specl ~l purpose Gr l arge f orgi l ] cj s. f ~r whi t! ] speci ~l
mechani cal properti es and I nspecti on procedures are necessar j .
~pe~l al at : ent i cn
shoul d be gi ven to i n~l udi ng al l spec?al i nst~ucti ons on tne dra ; s an@ order-
so that tensi l e properti es and grai n f l ow wi l l be determi ned at the desi re~
areas, and t o the determi nati on of nroperti e~, parti cul arl y ducti l i ty and ~ensi l e
11
MI L- A- 22771D
yi el d strengrh i n d: ?ecti ons normal to the obser ved grai n f l ow i n cri ti cal l y
stressed areas i n the f orgi ng.
6. 4 Hardness. For i nf ormati on. the mi ni mum Bri nel l hardness ( 500 Kuf l oad.
10 mm di ameter bal l } usual l y measured on the surf ace of the properl y he; t treated
f orgi ngs i s shown i n Tabl e VI .
6. 5 Change i n temper desi gnati on. Tempers T736 and T73652 of al l oys 7050,
7075 and 7175 hav? been desi gnated as T74 and T7452, respectively. Temper T73654
of al l oy 7175 nas been desi gnated as T7454.
6. 6 Chanqes f rom previ ous tssue. Asteri sks ar+ not used i n thi s revi si on to
i denti f y changes wi th respect to the previ ous i ssue due to the extensi veness of
the changes.
Custodi ans:
Army - MR
Navy - AS
Ai r Force - 20
Revi ew acti vi ti es:
Army - AL, AR, AV, ME, MI
Ai r Force - 8C, 99
DLA - I S
Prepari ng acti vi ty:
ti avy- AS
( Proj ect FORG- 0095)
User acti vi ti es:
Navy - OS, SH
! 41L- A, - 22771! I
d
a
c
n
m
o
0,
m
o
m
o
c) m m LA u l
o
0
0 0 0
0 0 0 0 0 0
1-
+
m
s
I
0
u ! 1 ,
u -l
I
I 1 t
E I 0 I 1 {
z 0 i
~
m m
1
1=
N
.-
i
I 0 1 I I I (
0
0
! ( I I t i
v
~
0 I I {
L
w
0
I
-d
I * I
(
a)
.
m
c
m
al
w
al
c
a
m
5
x
o
*
La o
N
o
I-4
o 0
m
=
o
I
I
.
0 1
a
04
0
I
I
o 0
II
J)
-d
.a
\
(w
1.
.

MI L- A- 22771D
TABLEII. )~echanical
properties of di e f orgi ngs, speci men axi s paral l el
TO di recti on of grai n f l ow l i nes. ~1
Al l oy Maxi mum Mi ni mum Mi ni mum yi el d Mi ni mum
and heat treat tensi l e strength at 0. 2 el ongati on
temper secti on thi ckness, srre~gtn, percent of f set, I n 2 I nches
~/ i nches ksi j / ksi ~1 or 40 4/ ,
Derceni J/
Up thru 2 65. 0 56. 0 5
2014- T6 Over 2 thru 3 65. 0 55. 0 6
Over 3 thru 4 63. 0 55. 0 6
2219- T6 UP thru 4 58. 0 38. 0
2618- T61
8
Up thru 4 58. 0 45. 0
i
4
6061- Tf i Up thru 4
!
38. 9
I
35. 0
~
5151- T6 Up thru 4
J 4. ~
37. 0
I
i O
Up thru 2
77
IL. o 62. 0 7
7049- T73 OVer 2 rhru d I 71. 2 61. 0 7
Over 4 thru 5 70. 0 60. 0 7
Up thru 2 72. 0 62. 0
I
7
7050- T74 Over Z thru 4 I 7i . 3 61. 0 7
~/ Over 4 thru 5 70. 0 60. 0 7
Over 5 thru 6 70. 0 59. 0 7
UP thru 1 75. 3 64. 0 7
Over 1 rhru 2 : 4. ) 63, 0 7
7075- T6
Over 2 ~hru 3 74. 3 63. 0 7
Over 3 thrti 4
- q
13. 3 62. 0 7
Up thru 3 66. 0 56. 0
I
7
7075- T73 Over 3 thru 4 64. 0 55. 0 7
Uo thru 3 66. 1) 56. 0 7
7075- T7352
Over 3 ~tl ru4
~q. g
53. 0 7
,
7075- T74 ~/ Lp thru 3
- .
/ 3. J 66. 0 7
7175- T74 ~/ Up thru 3 76. 0 66. 0
I
7
7175- T7452 ~/ Up thru 2
73. ~
63. 0 7
71750T7454 ~/ ~Up thru 3
A
75. ( ) 65. 0 7
The paral l el di recti on of speci mens shal l be ~ 15 degrees.
Di e f orgi ngs i n some conf i gurat~ans of these al l oys can be purchased i n
the heat treated and compressi on stress rel i eved T652 temper conf ormi ng
to the mechani cal property requl - ~ments speci f i ed f or T6 temper,
respecti vel y.
Tensi l e preperty test requi rements may be wai ved or negoti ated uetueen
the contractor dna the org! ng sJ aOl ! er ar cetbeen the acqui ri ng
dcti vi ty and the f crgi ng ;uopl!er 2r contractor f or materi al n 3Py
D - e~rssen?s :pec:men diamet2~.
.
MI L- A- 22771D
TABLE 111 Mechani cal properti es of di e f orgi ngs, speci men axi s not paral l el
to di recti on of grai n f l ow l i nes. ~j

Al l oy Maxi mum heat Mi ni mum Mi ni mum yi el d l Mi ni mum
and
, treat secti on
tensi l e strength at 0. 2 el ongati on
temper thi ckness, strength, percent of f set, i n 2 inches
~1 i nches ksi ~f ksi J / or 4D ~/ ,
percent ~/
Up thru 1 64. 0 55. 0
i
3
Over 1 thru 2 64. 0 55. 0 2
2014=T6
Over 2 thru 3 63. 0 54. 0 2
Over 3 thru 4 63. 0 54. 0 2
2219- T6 , Up thru 4 56. 0 36. 0 4
2618- T61 \ Up thru 4 55. 0 42. 0 4
6061- T6 UP thru 4 38. 0 35. 0 5 -
( j 151_T6
Up thru 4 44. 0 37. 0 6
Up thru 1 71. 0 61. 0 3
Over 1 thru 3 70. 0 60. 0 3
7049- T73 Over 3 thru 4 70. 0 60. 0 2
Over 4 thru 5 68. 0 58. 0 I 2
Up thru 2 68. 0
10ver 2 thru 4
56. 0 5
7050- T74 67. 0 55. 0 I 4
t
~1 10ver 4 t hr u 6 66. @ 54. 0 i 3
Up thru 1 71. 0
] Over 1 thru 2
61. 0 3 -
71. 0 61. 0 3
7n7c TC I n- - - - e AL- . . a
- 3. 0 60. 0 3
1-
10ver 3 thru 4 7(
Up thru 3 62. 0 53. 0 3
. 7075_T73
o ~er 3 thru 4 61. 0 52. 0 2
Up thru 3
I
62. 0 51. 0 3
I
tu13- l t33L Over 3 thru 4 61. 0 49. 0 2
7A7r TIA c l 11- LLA..
3 _71. o
I - 4n I A
3 71. 0
7 6R 0
-
I 7175- T7454 //IuD
Lnru
thru
thrl l
) . 0 I 60. 0
.
Df . u
. .
62. 0
55 l - )
..
I 2
4
4
4
.> 1 t u.u I t 4
1/
4;
5/
5/

7/
The paral l el di recti on of speci mens shal l be ~ 15 degrees.
Di e f orgi ngs i n some conf i gurati ons of these al l oys can be purchased : n
the heat treated and compressi on stress rel i eved T652 temper conf ormi ; q
to the mechani cal property requi rements speci f i ed f or T5 temper,
respecti vel y.
~ensi ; e ~ror) erzy rest requi rements may be waived or negoti ated ~etwe=~!
ne contractor and the f orgi ng suppl i er or between the acqui - ; nq .
acri vi ty and the crgi ng suppl i er or contr~ctor f cr matsri al ; - I arv
di recti dn i n whi ch the j i mensi on i s l ess than 2 i rches because ~f ~hs
d~f f i cul ty t~ obtai n a tensi on test speci men sui tabl e f or r~uti ~e
c~ntrol test! ng ( see 6. 2. 1) .
YI L- A- 2277i D
Amy Maxi mum hear
and treat secti on
temper thi ckness,
i nches ~/
Up tnru 2
Mi ni mum Mi ni mum
tensi l e yi el d strength
strength, at 0. 2 percent
ksi ~1 of f set, ksi 2/
65. 0 56. 0
65. 0 56. 0
64. 0 56. 0
. 0
Mi ni mum
el ongat~on
I n 2 i nches
or 40 3/ .
Axi s of
t ~s~
speci men
OercenI ~/
8
Lengl tudi nal
Lena trvs.
Longi tudi nal
Long trvs.
Snort trvs.
Longi tudi nal
Lonq trvs.
Short trvs.
Longi tudi nal
I
Over. 2 thru 3
62. 0 55
63. 0 1
55
L
8
- 1
I Over 3 thru 4
I
61. 0 54. ( )
62. 0 54. 0
- -
54. 0 2014- T6
I
over 4 thru S
2
Long trvs.
Short trvs. I
Longi tudi nal -
Long trvs.
Snort trvs.
I
Cver 5 thru 6 1. 0
! . U
60. 0
I 52. 0
60. 0 I 52. 0
58. 0
qa
. 0
59. 0 ; ; . 0
I
59. 0 I 51. 0
57. 0 i 51. 0
I
Gver 6 thru 7
Longi tudi nal
Lonq trvs.
----++ Short trvs.
Longi tudi nal I
I over 7 thru 8
I
Long trvs.
Sh~rt trvs.
Longi tudi nal
Lena trvs.
65. 0
! S6. 0
I
8
65. 0 56. 0 3
I
CA n I
76.0 8 1 Longi tudi nal
Long trvs.
Short trvs.
m
D4.U I
!
2. 014- T65Z Over 3 thru 4
m
,.
Over 4 thru 5
bd.U t 54.() I 7 I
I
Gver 5 thru 6
] Cver 6 thrl J 7
I

I
7
$l i ni l mu, m
el ongati on
~n 2 i nches
or 40 3; ,
f-
& I
UP thru LI
i
78- E=lK#
-L. w I ( *
i
f-
1
/
I
LOrtqi tud~
Over 4 thru 8
i
Lonq
tl - v:
I
Short tr~
i
I
Over 2 thru 3
Lonqi tudi r
Long trv~
I
Short trv
71.
0
r 3 thr~
i
I
I
t
66. 0
Longitudinal; .
71,~ /
I LOnq tr~!
- ,
I

Over
I
3 t hr u 4
I
I
-
.-
I
+JQ-l--
7-
P
.d
~.=----
1
!J
u
Ailoy
and
temper
7050- T452
( conti nued;
7~75_T5
TiG:{mum heat ~
i
: ~i mum
I
Mi ni mum Mi ni mum
treai secti on ~Axi s c? ~tenti l ~
[ ~i el d stref i gtn
, el ongati on
.
thi ckn?~~, t?st
inches 4/ ~ specimen
~~;;yyj a:f&tDe;:y;, n 2 n:hes
& * > or 4D J / ,
! -
percenT ~/
Longi tudi nal 71. 0 61. 0 9
Of : sr 3 zhru 4 ~ LGr?grf ~s. i 7C. O 59. 0 5
Short trvs. ! 67. 0
I
55. 0
I Longi tudi nal
4
, 70. 0 60. 0 9
Over 4 rhru 5 I Lonq trvs. 69. 0 I 58. 0 4
Short trvs. 66. 0 54. 0 3
Longi tudi nal 69. 0 ! 59. 0 9
Cver 5 t hr u 6 Long t r v~. 58. 0
55. )
4
Short trvs. 66. 0 53. 0
~
3
Longi tudi nal 5a. o 58. 0 9
+
Over 6 thru 7 ~ Long trvs. 67. 0 54. 0
I
4
Short trv~. 55. 0
1
51. 0 I 3
Longltudinai 67. 0
1
57. 0 9
J
Over 7 thru 8 Long trvs. 66. 0 I 52. 0 4
Short trvs. 64. 0 50. 0 3
Longi tudi nal 74. 0 6: . 0
I
I 9
Up t nr u 2 Lonq r r vs. ~ 73. 0 61. 0
1
4
Lonai tudi ~a~ 73. 0 61. 0 I 9 1
7- J 75_
Over 2 thru 3 Long trvs. 71. 0 I 59. 0
1
4
Short trv:. 69. 0 5a. o ! 3
Longi t udi nal 71. G ! 60. 0
I
8
4 Locg trvr.
7f l ~
53. 0 ! 3
- - -
I
I
Shcrt trvt. , 58. 0 I 5; . 0 1
z
Longi tudi nal
i
69. 0 58. 0 7
I
J
m. o \ Over 4 thru 5 - Long trv~. 56. 0 3
I
t
Short trvs. ~ 66. 0 56. 0 2
, Longi tudi ~al 6a. o 56. 0 \
i
-
6
10ver 5 thru 5
Lonq trvs. : 56. 0 55. 0 3
5horr trvs. 65. 0 i
Go
9
L

l ti D thru 2
1
l - - - b- . . . . , 7? ,> I
Ei . o
i A i
LUI ; U L:V>. I 1.3.U !
652
. .
---~
MI L- A- 227710
TABLE I V.
Mechani cal properti es cf hand f orgi nqs. 1/ - Wnti nued
Al l oy
and
temper
7075- T73
Maxi mum heat
treat section Axi s of
thi ckness, tsst
i nches 4/
speci men
Longi tudi nal
Up thru 3
Lonq trvs.
Short trvs.
Longi tudi nal
Over 3 thru 4
Lonq trvs.
i Short trvs.
Longi tudi nal
] ver 4 thru 5 Lonq trvs.
Short trvs.
Longi tudi nal
l ver 5 thru 6 Long trvs,
Short trvs.
Longi tudi nal
J p thru 3
Long trvs.
Mi ni mum
I Mi ni mum
tensi l e yi el d strength
st] ength, at 0. 2 percent
ksi ~/
I
of f set , ksi ~/
,
66. 0 56. 0
64.0
54. 0
61. 0
52, 0
64. 0
55.-J
63.0
[ 53.0
60. 0 51. 0
Mi ni mum
elongation
i n 2 i ~c he~
or 4D 3/ ,
percen~ ~/
7
4
2
/ I
66.0 54.ij 7
4
64. 0
I
52. 0 4
Shor t t r vs. I 61. 0
50. 0 ~
~
Longi t udi nal
64. 0 - ~3. ( )
7
) ver 3 t hr u 4
Lonq trvs. 63. 0 50. 0 1
- 1
1
Short trvs. 60. 0 ~ 48. 0
7075- T7352
i
Longi tudi nal i 62, 0 f ~l oo
7
Gti eI -4 thru 5 Long trvs. i 61. 0
I
48. d
I
3
Short trvs. ~ 5a.o ! 46.~
,.
/
Longitudinal ~
.
61.0 ; 45. 0 i 5
Over 5 thru 6
Long trvs. I 59. 0 ; 46. 0
i
Short trvs. I 57. 0
44. 0
;
I
Longi tudi nal ~ 73. 0
I
63. 0 9
~Up thru 3
Lonq trvs, 71. 0 ! ~o. ~ - ~
<
7075- T74 1
Short trvs. j 69. 0
6C. O
r
y
i
4
1
I
i
l over 3 thru 4
Longi tudi nal ~ 71. 0 61. 0
3
Long trvs. ; 7@. O
58.0 5
I
t
Short trvs. ; 68. 0
57.0
t
I
I
4
Longi tudi nal ]
68. 0 57. 0 a
Over 4 thru 5
Lonq trvs. ! 67. 9
1
56.0 ~ ~
Short trvs. !
4 66. 0 55. 0 !
J
Longi tudi nal ~
65. 0
54. 0
a
I Over 5 thru 6
[ onq trvs.
1
64. 0
i 52, @ c
I Short trvs.
- 4
63. 0
52. 0
Longi tudi nal 71. 0 61. 0
.
3
! Up thru 3 Lon : r l z. 69. 0 ~~ o
-
7~75_~745~!
$f i crt t; : / s. 67. 9
~/
, Over 3 thru 4
i
&&p
- ; ; l - +- - - ;
. ,
.
I 1..-1 m L - , .A .- I . - la m 931 m --e . - - I Ln.#u --- I n- w- k I
MI L- A- 22771D
7, A6LE I V. Mechani cal or ~oer ~i es of hand f era! nqs. ~/ - Conti nued
Al l oy Maxi mum neat
treat secti on
t hi ckness,
i nches 4/
~(lnjmum
Mi ni mum
: f i el astrength el~nga~ion
at 0.2 percent i n 2 i nches
of f : et , ksi ~1 or 40 ~/ ,
I Mi ni mum
Axi s of
I
(tensi l e
test strength,
speci men ksi 2/
Longi tudi nal 65. 0
Long trvs. 64. 0
Short trvs. 63. 0
Longi tudi nal 63. 0
Long trvs. 61. 0
and
temoer
7975- T7452
, y
( conti nued)
Over 4 thru 5
) ver 5 t hr u 6
Snort trvs. 60. 0
Lon~i tudi nal 73. 13
J p thru 3
her 3 thru 4
60. 0 4
61. 0 9
58. 0 5
57. 0 4
57. 0 ;
- P * - 1
7175- T74 1
y ) ver 4 thru 5
==+
Lon trvs.
Short trvs.
Lon ; tudi nal
Lonq trvs.
5
U1.u
55. 0 I 4 - 1
I 1
54. 0
8
4
52. 0 5
52. 0 I 4
65. 0
64. 0
i
Gver 5 thru 6
1
_rt trvs. 63. 0
Longi tudi nal
1
71. 0 6i . 6
I
9
J
up thru 3 Long t r vs. 69. 0 58. 0 5
Short trvs. ~ 67. 9
54~
I
4
Longi t udi nal I 58. 9 57. 0 9
i Gver 3 thru 4
Long trvs.
I
67. 0
~~. ~
5
Short trvs. 65. 0 51. 0 4
Longi tudi nal 65. 0 54. 0
8
Cver 4 thru 5
Long trvs. 64. 0 52. 0 5
!
Short trvs.
~~. o
49. 0
4
, Longi tudi nal 63. D 51. 0 8
Over 5 thru 5
Long trvs . 51. 0 ~9.o
1 5
Short trvj . ~
~( - J . rJ
46. 0 4
)
7175- T7452
g/
Max~mumcross-sectional area i s 256 square I ncnes except, maximum Cro5s-
secticmal area f cr 2618 alloy ~j 144 square i rches.
Tensi l e proper?y test r~~ui rements may be Wai ved ~r negoti ated betweec
the contractor and : ne f orgi ng
: ugpl i er or between the acgui r na

MI L- A- 22771D
TABLE V. hl ecnani cal properti es of rol l ed ri ng f orgi ng. ~/ ~/
Al l oy
I
Maxi mum Mi ni mum Mi ni mum Mi ni mum
and heat treat Axi s of tensi l e yi el d st r engt h ei ongat i oc
t emper sect i on t hi cknecs t est strength at 0. 2 percent i n Z i nches
~ speci men ~1 i nches k~i J I cf f cet, kci ~/
I I
or 40 $ ,
I
I
! percent j /
Tangenti al
( j ~- ~ j 550
7
Up thru 2. 500 Axi al
62. 0 : 55. 0
I
3 -
Radi al 3/ 60. 0
1
52. 0 2
2014- T6 Tangent i al
65, 0 I
55.0 ; 6 i
and 2. 501- 3. 000 Axi al 62. 0
I
52. 0 } 2
- T652 ~/ Radi al 3/
- - -
1
1
Tangenti al
I
56. 0 - - 40. 0 5 ;
2219- T6 Up thru 2. 500 Axi al 55. 0 37. 0 4 i
Radi al 3/ 53.0 35.0 2
I
Tangenti al
55.0
41. 0 5
2618- 161 Up thru 2. 500 Axi al 55. 0 41. 0 5
Radi al 3/
1
- - - - - -
1
!
Tangenti al ! 38. 0
i
35. 0
1
10
UD thru 2. 500 Axi al 38. 0 35. 0 8
t
6061- T6
L
Radi al 3/ ~ 37. 0 33. 0
I
i
and Tangenti al 38. 0 35. 0 8
- T652 ~} 2. 501- 3. 500
.
Axi al
~.
38. 0 35. 0 ~
~Radi al 3/ 37. 0 33, 0 :
6151- T6 Tangenti al 44. 0 37, 0 5
and Up thru 2. 500 Axi al I 44.0 35.0 4
-T652 s/ Radial 3/ I 42.0
i 35.0
I
~
Tangenti al : 73. 0
I
62. 0 7
Up thru 2. 000 Axial
72. 0 i
_
61. 0 3
7075- T6 Radi al 3/ 680
58, 0 ?
and Tangenti al 71. 0 60. 0 6
- T652 ~/ 2. 001- 3. 500 Axi al 70. 0 59. 0 3
i
Radi al 3/
- - - - -
A
A cyl i ndri cal product of rel ati vel y short hei ght ci rcumf erenti al l y
rol l ed f rom a hol l ow f orged bl ank.
Appl i cabl e onl y to ri ngs whi ch have an (X)- to- wal l thi ckness rati o of
10/ 1 or greater. Those havi ng a smal l er rati o are subject to special
cegotl ati on.
Radi al properti es are not speci f i ed requi rements.
For wal l thi cknesse~
2 i nches and greater, they wi l l be determi ned when speci f i cal l y
requested f or i nf ormati onal purposes Gnl y.
D represents ~peci mer di amter.
Forgi ngs may be a~al ]abl e i n the T651 tem~er.
MI L- A- 22771D
TABLE VI . Recommended ! i l ri ne?lhardness ( mi ni mum) . ~/
Commerci al desi gnati on Bri nel l hardness
(minimum)
2014- T6 125
2219- T6 100
2618- T61 115
6061- T6 80
6151- T6 90
7049- T73
135
7050- T74 ~1, - T7452 3/
135
7075- T6 135
7075- T73 130
7175- T74 ~1, - T7452 j /
135
--
~/ Thfs table Is f or i nf ormati on purposes onl y.
~/ Formerl y desi gnated as T736 temper.
~/ Formerl y desi gnated as T73652 temper.
1 I I MU-nunn-.
.
INSTRUCTIONS. In a contmumu c ffo~ LO ~ke our ~t~nd~rdi-tlon d- umen~ better. theDoD provides ttus form for use in
aubrmttmg cornmenu and suggesttona for ~mprovcmenta Ail uaem of ntihtary s~ndardization documen~areI nvrted toprov~de
~~tl ona. l %i s f ormmay be detxki folded Giong the hnea indlcst~, tapd slow the Iooae edge (DO NOT STWLE), and
tiled b ~ltik 5. ~ u SWlrIC u xlblp about P~ICUiBJ probi~m ~e~ such M worduvi whi ch requmd mtapretation, was
too ngld, mstnctive, Iooae, Gmbtguous, or wu I ncompsl l bl e, snd gtve proposed wording changes which would aIlev~ate the
~bie~. Entermblock 6 Gny remsrlu not related to a spemfsc paragraph of tne document. If block 7 1s filiecl out, an
~knowiedgcrnent wili be maiied to You wthm 30 d~ys to iet you know thst your commen~ were received and are be]ng
comde~d.
SOTE Thu form rnaY not b? used to rcquc~~COpI Ca O( documenu, nor to request wmvers, devlatlone, or clarification of
specification requwements on current contract4. Comm@nta submitted on thlc form do not conat; tuw or Imply authorization
ta W*JVQGny potilon of the ref-nc?d document(c) or to amend contractual requlremenb.
wC) POSTAGE
UECESSAm V
IF MAILED
, N THE
Q% IT EOS7A7ES
STANDARDIZATION DOCUMENT IMPROVEMENT PROPOSAL
! 41L- A- 22771D
I
ALUMI NUM ALLOY FORGI MGS , HEAT TREATED
L #4AMt OF 8UDti$~lM0 -GANIZATIO* ]4 TVPQ OF ORGANIZATION (M- OM)
[0
v@Moon
cl
we n
lo
OTHER (Spuiry) ,
. .
1
PROOLEM AREAS
I
C0481- Ool.omol
1
.-
1
DOA%1426
GnEv IOuS EO[?ION IS ~SOLtTE