Reading Measured Value Block: Readout Specifications For Engine Power Output
Reading Measured Value Block: Readout Specifications For Engine Power Output
unit injector)
Page 1 of 2
Copyright VW AG
Workshop manual
DMS order no.: undefined
VIN: WAUZZZ8DZ1A081895
Sales code: 8D50F4
Engine code: AJM
Official licence plate number:
Username: Calin
Indicated on display
XX.X
mg/stroke
Indicated on display
XX.X
mg/stroke
Injection quantity limitation according to
detected air mass (to avoid exhaust
smoke): 47...52 mg/stroke okay
< 47 mg/stroke:
detected air mass too small => test air
mass meter, Page 23-78
Exhaust gas recirculation at full throttle
=> test 5)
Injection quantity limitation according to engine
speed (torque limitation):
44...47 mg/stroke: okay
< 44 mg/stroke: engine speed too high or too low
> 47 mg/stroke: injection quantity increased as a
https://portal.cpn.vwg/elsapro/elsaweb/ctr/RMContentAction?docId=20847776&levelCo...
19.02.2013
TDI diesel direct injection and glow plug system (4-cyl. unit injector)
Page 2 of 2
result of tuning
Display zones 1 and 2 => Page 01-102
5)Testing exhaust gas recirculation:
Display Group 010 at full throttle (road test, coolant temperature not below +80 C)
Important: Always observe safety precautions => Page 01-1.
Important: Observe rules for road test at full throttle => Page 01-78.
Read measured value
block 10
XXX
XXXX XXXX
mg/stroke mbar
mbar
Indicated on display
XXX
%
https://portal.cpn.vwg/elsapro/elsaweb/ctr/RMContentAction?docId=20847776&levelCo...
19.02.2013