Professional Documents
Culture Documents
Loads For Supporting Beams: LX Ly UDL On Slab
Loads For Supporting Beams: LX Ly UDL On Slab
lx = 7.26 m
ly = 9.16 m
UDL on slab = 5 kN/m2
The loads of triangular segment A will be transferred to beam 1-2 and the same of trapezoidal segment B will be transferred to bea
effects on bea
max intensity of D DL = 36.30 kN/m (w1) be due to sla
lx = 7.26 Beam 2-3 max Intensity of UDL = 19.00 kN/m (w2) both sides, s
n beam will
to slab on
des, so (x2)
+y/4))
Design of transver beam
Length of beam = 7.26
Max factored bending momment on transverce beam = 11.96
Max factored shear force = 6.59
TAKING Qbc = 165 N/mm2
SECTION MODULUS
REQUIRED = 724729.5 mm3
= 724.7295 cm3
Size of I section used
Top Flange of beam 16 300
web plate 12 810
bottom flange 16 300
SECTIONAL PROPERTIES
= 20.395092 MM
ALLOWABLE DEFLECTION
= 22.338462 MM HENCE SAFE
m
t-m
MT
Design of Longitudnal force beam
Length of beam = 9.16
Max factored bending momment on longitudnal beam = 23.35
Max factored shear force = 8.39
TAKING Qbc = 165 N/mm2
SECTION MODULUS
REQUIRED = 1415368 mm3
= 1415.3681 cm3
Size of I section used
Top Flange of beam 20 300
web plate 12 960
bottom flange 20 300
SECTIONAL PROPERTIES
= 25.241048 MM
ALLOWABLE DEFLECTION
= 28.184615 MM HENCE SAFE
m
t-m
MT