AO3407A

30V P-Channel MOSFET

General Description Product Summary

The AO3407A uses advanced trench technology to VDS -30V

provide excellent RDS(ON) with low gate charge. This ID (at VGS=-10V) -4.3A
device is suitable for use as a load switch or in PWM RDS(ON) (at VGS=-10V) < 48mΩ
applications.
RDS(ON) (at VGS =-4.5V) < 78mΩ

SOT23
Top View Bottom View D

D
D

G G
S
S
G S

Absolute Maximum Ratings TA=25°C unless otherwise noted

Parameter Symbol Maximum Units
Drain-Source Voltage VDS -30 V
Gate-Source Voltage VGS ±20 V
Continuous Drain TA=25°C -4.3
ID
Current TA=70°C -3.5 A
Pulsed Drain Current C IDM -25
TA=25°C 1.4
PD W
Power Dissipation B TA=70°C 0.9
Junction and Storage Temperature Range TJ, TSTG -55 to 150 °C

Thermal Characteristics
Parameter Symbol Typ Max Units
Maximum Junction-to-Ambient A t ≤ 10s 70 90 °C/W
RθJA
Maximum Junction-to-Ambient A D Steady-State 100 125 °C/W
Maximum Junction-to-Lead Steady-State RθJL 63 80 °C/W

Rev 5: Nov 2011 www.aosmd.com Page 1 of 5

 AO3407A

Electrical Characteristics (TJ=25°C unless otherwise noted)

Symbol Parameter Conditions Min Typ Max Units

STATIC PARAMETERS
BVDSS Drain-Source Breakdown Voltage ID=-250µA, VGS=0V -30 V
VDS=-30V, VGS=0V -1
IDSS Zero Gate Voltage Drain Current µA
TJ=55°C -5
IGSS Gate-Body leakage current VDS=0V, VGS= ±20V ±100 nA
VGS(th) Gate Threshold Voltage VDS=VGS ID=-250µA -1.4 -1.9 -2.4 V
ID(ON) On state drain current VGS=-10V, VDS=-5V -25 A
VGS=-10V, ID=-4.3A 34 48
mΩ
RDS(ON) Static Drain-Source On-Resistance TJ=125°C 52 68
VGS=-4.5V, ID=-3A 54 78 mΩ
gFS Forward Transconductance VDS=-5V, ID=-4.3A 10 S
VSD Diode Forward Voltage IS=-1A,VGS=0V -0.7 -1 V
IS Maximum Body-Diode Continuous Current -2 A
DYNAMIC PARAMETERS
Ciss Input Capacitance 520 pF
Coss Output Capacitance VGS=0V, VDS=-15V, f=1MHz 100 pF
Crss Reverse Transfer Capacitance 65 pF
Rg Gate resistance VGS=0V, VDS=0V, f=1MHz 3.5 7.5 11.5 Ω
SWITCHING PARAMETERS
Qg(10V) Total Gate Charge 9.2 11 nC
Qg(4.5V) Total Gate Charge 4.6 6 nC
VGS=-10V, VDS=-15V, ID=-4.3A
Qgs Gate Source Charge 1.6 nC
Qgd Gate Drain Charge 2.2 nC
tD(on) Turn-On DelayTime 7.5 ns
tr Turn-On Rise Time VGS=-10V, VDS=-15V, RL=3.5Ω, 5.5 ns
tD(off) Turn-Off DelayTime RGEN=3Ω 19 ns
tf Turn-Off Fall Time 7 ns
trr Body Diode Reverse Recovery Time IF=-4.3A, dI/dt=100A/µs 11 ns
Qrr Body Diode Reverse Recovery Charge IF=-4.3A, dI/dt=100A/µs 5.3 nC
A. The value of RθJA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA =25°C. The
value in any given application depends on the user's specific board design.
B. The power dissipation PD is based on TJ(MAX)=150°C, using ≤ 10s junction-to-ambient thermal resistance.
C. Repetitive rating, pulse width limited by junction temperature TJ(MAX)=150°C. Ratings are based on low frequency and duty cycles to keep
initialTJ=25°C.
D. The RθJA is the sum of the thermal impedence from junction to lead RθJL and lead to ambient.
E. The static characteristics in Figures 1 to 6 are obtained using <300µs pulses, duty cycle 0.5% max.
F. These curves are based on the junction-to-ambient thermal impedence which is measured with the device mounted on 1in2 FR-4 board with
2oz. Copper, assuming a maximum junction temperature of TJ(MAX)=150°C. The SOA curve provides a single pulse rating.

THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL
COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING
OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN,
FUNCTIONS AND RELIABILITY WITHOUT NOTICE.

Rev 5: Nov 2011 www.aosmd.com Page 2 of 5

 AO3407A

TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS

30 30

-6V VDS=-5V
25 25
-10V
-4.5V
20 20
-ID (A)

-ID(A)
15 15
-4V
10 10
125°C
25°C
5 VGS=-3.5V 5

0 0
0 1 2 3 4 5 0.5 1.5 2.5 3.5 4.5 5.5
-VDS (Volts) -VGS(Volts)
Fig 1: On-Region Characteristics (Note E) Figure 2: Transfer Characteristics (Note E)

80 1.8

70 Normalized On-Resistance
1.6 VGS=-10V
60 VGS=-4.5V ID=-4.3A
Ω)
RDS(ON) (mΩ

1.4
50 17
5
40
1.2 2
30
VGS
10
=-4.5V
VGS=-10V 1 ID=-3A
20

10 0.8
0 2 4 6 8 10 0 25 50 75 100 125 150 175
-ID (A)
Figure 3: On-Resistance vs. Drain Current and Gate Temperature (°C) 0
Voltage (Note E) Figure 4: On-Resistance vs. Junction
18Temperature
(Note E)

120 1.0E+02
ID=-4.3A
1.0E+01
100
40
1.0E+00
125°C
Ω)

80
RDS(ON) (mΩ

1.0E-01
-IS (A)

125°C
1.0E-02
60 25°C
1.0E-03
40
25°C 1.0E-04

20 1.0E-05
2 4 6 8 10 0.0 0.2 0.4 0.6 0.8 1.0 1.2
-VGS (Volts) -VSD (Volts)
Figure 5: On-Resistance vs. Gate-Source Voltage Figure 6: Body-Diode Characteristics (Note E)
(Note E)

Rev 5: Nov 2011 www.aosmd.com Page 3 of 5

 AO3407A

TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS

10 800
VDS=-15V
ID=-4.3A
8
600 Ciss

Capacitance (pF)
-VGS (Volts)

6
400
4
Coss
200
2

Crss
0 0
0 2 4 6 8 10 0 5 10 15 20 25 30
Qg (nC) -VDS (Volts)
Figure 7: Gate-Charge Characteristics Figure 8: Capacitance Characteristics

100.0 40
TA=25°C
10µs
10.0 30
RDS(ON)
100µs
Power (W)
ID (Amps)

limited
1.0 1ms 20
10ms
10ms

0.1 10
TJ(Max)=150°C 10s
TA=25°C DC
0.0 0
0.01 0.1 1 10 100 0.0001 0.01 1 100
VDS (Volts) Pulse Width (s)
Figure 10: Single Pulse Power Rating Junction-to-
Figure 9: Maximum Forward Biased Safe
Ambient (Note F)
Operating Area (Note F)

10
D=Ton/T In descending order
Zθ JA Normalized Transient

TJ,PK=TA+PDM.ZθJA.RθJA D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse

Thermal Resistance

1 RθJA=125°C/W

0.1

PD
PD
0.01
Single Pulse Ton
Ton T
T
0.001
0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000
Pulse Width (s)
Figure 11: Normalized Maximum Transient Thermal Impedance (Note F)

Rev 5: Nov 2011 www.aosmd.com Page 4 of 5

 AO3407A

Gate Charge Test Circuit & Waveform

Vgs
Qg
- -10V
VDC
-
+ Vds Qgs Qgd
VDC
+
DUT
Vgs

Ig

Charge

Resistive Switching Test Circuit & Waveforms

RL
Vds ton toff

td(on) tr t d(off) tf
Vgs
-
Vgs DUT VDC
Vdd 90%
Rg
+

Vgs 10%
Vds

Diode Recovery Test Circuit & Waveforms

Vds + Q rr = - Idt
DUT
Vgs

t rr
Vds - L -Isd -I F
Isd dI/dt
+ Vdd -I RM
Vgs VDC
Vdd
Ig
- -Vds

Rev 5: Nov 2011 www.aosmd.com Page 5 of 5