Section: PRECAUTION ..............................................
Section: PRECAUTION ..............................................
Section: PRECAUTION ..............................................
SE
A
B
SECTION
SEAT C
E
CONTENTS
PRECAUTION ............................................... 2 Removal and Installation .......................................... 7 F
Bench Seat ............................................................... 8
PRECAUTIONS ................................................... 2 Exploded View .......................................................... 9
Precaution for Supplemental Restraint System Removal and Installation .......................................... 9 G
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN-
SIONER" ................................................................... 2 REAR SEAT ...................................................... 10
Precaution ................................................................. 2 Exploded View .........................................................10
Removal and Installation .........................................11 H
PREPARATION ............................................ 3
DISASSEMBLY AND ASSEMBLY .............. 12
PREPARATION ................................................... 3 SE
Special Service Tool ................................................. 3 FRONT SEAT .................................................... 12
Commercial Service Tool .......................................... 3 Bucket Seat .............................................................12
Exploded View .........................................................12
ON-VEHICLE REPAIR .................................. 4 Bench Seat ..............................................................15 J
Exploded View .........................................................15
FRONT SEAT ...................................................... 4
Bucket Seat ............................................................... 4 REAR SEAT ...................................................... 16 K
Exploded View .......................................................... 4 Exploded View .........................................................16
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the SRS and SB section of
this Service Manual.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the SRS section.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
Precaution INFOID:0000000004052082
Tool number C
(Kent-Moore No.) Description
Tool name
— Locating the noise D
(J-39570)
Chassis ear
SIIA0993E F
G
— Repairing the cause of noise
(J-43980)
NISSAN Squeak and Rattle
Kit H
SE
SIIA0994E
(Kent-Moore No.)
Description
Tool name
L
(J-39565) Locating the noise
Engine ear
N
SIIA0995E
Driver Seat
ALIIA0292GB
SE
ALIIA0293GB
A
CAUTION:
• When removing or installing the seat trim, handle it carefully to keep dirt out and avoid damage.
• When removing and installing the seat, use shop cloths to protect the vehicle from damage. B
REMOVAL
1. Slide the seat forward and remove the rear leg covers.
2. Remove the two rear seat to body bolts. C
3. Slide the seat to the back and remove the three front seat to body bolts.
4. Remove the seat from the vehicle.
D
INSTALLATION
Installation is in the reverse order of removal.
E
SE
ALIIA0294GB
A
Removal and Installation INFOID:0000000003950074
CAUTION: B
• When removing or installing the seat trim, handle it carefully to keep dirt out and avoid damage.
• When removing and installing the seat, use shop cloths to protect the vehicle from damage.
REMOVAL C
1. Slide the seat forward and remove the two side seatback bolts.
2. Remove the seatback from the vehicle.
D
3. Slide the seat forward and remove the two rear seat to body bolts.
4. Slide the seat to the back and remove the two front seat to body bolts.
5. Remove the seat cushion from the vehicle. E
INSTALLATION
Installation is in the reverse order of removal.
F
SE
ALIIA0295GB
A
Removal
1. Release the seatback.
B
2. Remove the seatback hinge bolts.
3. Remove the seatback.
C
ALIIA0297GB
E
4. Remove the lower seat bolts.
5. Remove the seat.
F
H
ALIIA0296GB
Installation SE
Installation is in the reverse order of removal.
Driver Seat
ALIIA0292GB
SE
ALIIA0293GB
SE
P
ALIIA0294GB
ALIIA0295GB