FST-951 Series Intelligent Addressable Heat Detectors

The NOTIFIER® FST-951 Series intelligent thermal detectors are

designed for both performance and aesthetics, and are direct
replacements for the FST-851 Series. A new modern, sleek, con-
temporary design and advanced thermal technologies make the
FST-951 Series ideal for both system operation and building design.
The point ID address, set using rotary decimal switches, provide
specific detector locations.
The series includes a 135°F/57°C fixed-temperature, rate-of-rise,
and a 190°F/88°C fixed high-temperature detectors. These thermal
detectors provide effective, intelligent property protection in a variety
of applications. Detectors are available for both FlashScan® and
CLIP applications as designated.

Features
SLC LOOP:
• Two-wire SLC loop connection
• Unit uses base for wiring
ADDRESSING: Installation
• Addressable by device FST-951 Series plug-in intelligent thermal detectors use a detach-
• Rotary, decimal addressing able base to simplify installation, service and maintenance. Installa-
(Refer to the NOTIFIER panel manuals for device capacity.) tion instructions are shipped with each detector.
ARCHITECTURE: Mount detector base (all base types) on an electrical backbox which
is at least 1.5" (3.81 cm) deep. For a chart of compatible junction
• Designed to meet UL 268 7th Edition
boxes, see DN-60054.
• Sleek, low-profile, stylish design
NOTE: Because of the inherent supervision provided by the SLC loop,
• State-of-the-art thermistor technology for fast response end-of-line resistors are not required. Wiring “T-taps” or branches are
• Integral communications and built-in device-type identification permitted for Style 4 (Class “B”) wiring only.
• Built-in tamper resistant feature When using relay or sounder bases, consult the ISO-X(A) installation
sheet I56-1380 for device limitations between isolator modules and iso-
• Built-in functional test switch activated by external magnet lator bases.
OPERATION:
• Fixed temperature model (FST-951) factory preset to 135°F Applications
(57°C) Use thermal detectors for protection of property. For further informa-
• Rate-of-rise model (FST-951R),15°F (8.3°C) per minute tion, refer to I56-6522, Applications Manual for System Smoke
Detectors, which provides detailed information on detector spacing,
• High-temperature model FST-951H) factory preset to 190°F
placement, zoning, wiring, and special applications.
(88°C)
• 360°-field viewing angle of the two visual alarm indicators, LEDs
blink red in Normal condition and turn on steady red in Alarm Construction
• LEDs blink every time the unit is polled These detectors are constructed of fire-resistant plastic. The FST-
951 Series plug-in intelligent thermal detectors are designed to com-
MECHANICALS: mercial standards and offer an attractive appearance.
• Sealed against back pressure
• SEMS screws for wiring of the separate base Operation
• Designed for direct-surface or electrical-box mounting Each FST-951 Series detector uses one of the panel’s addresses
• Plugs into separate base for ease of installation and maintenance (total limit is panel dependent) on the NOTIFIER Signaling Line Cir-
• Separate base allows interchange of photoelectric, ionization and cuit (SLC). It responds to regular polls from the control panel and
thermal sensors reports its type and the status. If it receives a test command from the
panel (or a local magnet test), it stimulates its electronics and
OTHER SYSTEM FEATURES: reports an alarm. It blinks its LEDs when polled and turns the LEDs
• Remote test feature from the panel on when commanded by the panel. The FST-951 Series offers fea-
tures and performance that represent the latest in thermal detector
• Walk test with address display technology.
• Low standby current
OPTIONS:
• Remote LED output connection to optional RA100Z remote LED
annunciator

DN-60975:B • 6/26/2019 — Page 1 of 3

Product Line Information B200SCOA-WH: White, Intelligent, programmable sounder base in
English/French (required in Canada for ULC applications with CO
NOTE: “-IV” suffix indicates CLIP and FlashScandevice. Series detector applications
FST-951: White, low-profile intelligent 135°F fixed thermal sensor, B200SCOA-IV: Ivory Intelligent, programmable sounder base in
FlashScan only English/French (required in Canada for ULC applications with CO
FST-951A: Same as FST-951 but with ULC listing Series detector applications, ULC listing
FST-951-IV: Ivory, low-profile intelligent 135°F fixed thermal sensor, B200S-LF-WH: White, Low Frequency Intelligent, programmable
FlashScan and CLIP sounder base. Produces a fundamental frequency of 520 Hz +/-
FST-951A-IV: Same as FST-951-IV but with ULC listing 10% with a square wave or its equivalent; designed to meet the
NFPA 72 sleeping space requirement. (CSFM: 7300-1653:0238)
FST-951R: White, low-profile intelligent rate-of-rise thermal sensor,
FlashScan only B200S-LF-IV: Ivory, Low Frequency Intelligent, programmable
sounder base. Produces a fundamental frequency of 520 Hz +/-
FST-951RA: Same as FST-951 but with ULC listing 10% with a square wave or its equivalent; designed to meet the
FST-951R-IV: Ivory, low-profile intelligent rate-of-rise fixed thermal NFPA 72 sleeping space requirement. (CSFM: 7300-1653:0238)
sensor, FlashScan and CLIP B200SR-WH: White, Intelligent sounder base capable of producing
FST-951RA-IV: Same as FST-951R-IV but with ULC listing sound output with ANSI Temporal 3 or continuous tone. Intended for
retrofit applications. (CSFM: 7300-1653:0213)
FST-951H: White, low-profile intelligent 190°F fixed thermal sensor,
FlashScan only B200SR-IV: Ivory, Intelligent sounder base capable of producing
sound output with ANSI Temporal 3 or continuous tone. Intended for
FST-951HA: Same as FST-951H but with ULC listing retrofit applications. (CSFM: 7300-1653:0213)
FST-951H-IV: Ivory, low-profile intelligent 190°F thermal sensor, B200SRA-WH: Same as B200SR-WH with, ULC listing
FlashScan and CLIP
B200SRA-IV: Same as B200SR-IV in Ivory color, ULC listing
FST-951HA-IV Same as FST-951 but with ULC listing
B200SR-LF-WH: White, Low Frequency Intelligent, programmable
INTELLIGENT BASES sounder base. Produces a fundamental frequency of 520 Hz +/-
NOTE: For details on intelligent bases, see DN-60981. 10% with a square wave or its equivalent; designed to meet the
NFPA 72 sleeping space requirement. Intended for retrofit applica-
B300-6: White, 6” base, standard flanged low-profile mounting base
tions. (CSFM: 7300-1653:0238)
(CSFM: 7300-1653:0109)
B200SR-LF-IV: Ivory, Low Frequency Intelligent, programmable
B300-6-IV: Ivory,6” base, standard flanged low-profile mounting
sounder base. Produces a fundamental frequency of 520 Hz +/-
base (CSFM: 7300-1653:0109)
10% with a square wave or its equivalent; designed to meet the
B300A-6: Same as B300-6, ULC listed NFPA 72 sleeping space requirement. Intended for retrofit applica-
B300A-6-IV: Ivory, 6” standard flanged low-profile mounting base, tions. (CSFM: 7300-1653:0238)
ULC listed MOUNTING KITS AND ACCESSORIES
B300-6-BP: Bulk pack of B300-6, package contains 10 TR300: White, replacement flange for B210LP(A) base
B501-WHITE: White, 4” standard European flangeless mounting TR300-IV: Ivory, replacement flange for B210LP(A) base
base. UL/ULC listed (CSFM: 7300-1653:0109)
RA100Z(A): Remote LED annunciator. 3-32 VDC. Mounts to a U.S.
B501-BL: Black, 4” standard European flangeless mounting base. single-gang electrical box. For use with B501(A) and B300-6(A).
UL/ULC listed (CSFM: 7300-1653:0109)
M02-04-00: Test magnet
B501-IV: Ivory color, 4” standard European flangeless mounting
base. UL/ULC listed (CSFM: 7300-1653:0109) M02-09-00: Test magnet with telescoping handle

B501-WHITE-BP: Bulk pack of B501-WHITE contains 10 CK300: Color Kit (includes cover and trim ring), white, 10-pack

B224RB-WH: White, relay base (CSFM: 7300-1653:0216) CK300-IV: Color Kit (includes cover and trim ring), ivory, 10-pack

B224RB-IV: Ivory, relay base (CSFM: 7300-1653:0216) CK300-BL: Color Kit (includes cover and trim ring), black, 10-pack

B224RBA-WH: White, relay base, ULC listing

B224RBA-IV: Ivory, relay base, ULC listing
B224BI-WH: White, isolator detector base (CSFM: 7300-1653:0216)
B224BI-IV: Ivory isolator detector base (CSFM: 7300-1653:0216)
B224BIA-WH: White, isolator detector base, ULC listing
B224BIA-IV: Ivory isolator detector base, ULC listing
B200S-WH: White, Intelligent addressable sounder base capable of
producing sound output in high or low volume with ANSI Temporal 3,
ANSI Temporal 4, continuous tone, marching tone, and custom tone.
Uses FlashScan protocol. (CSFM: 7300-1653:0213)
B200S-IV: Ivory, Intelligent addressable sounder base capable of
producing sound output in high or low volume with ANSI Temporal 3,
ANSI Temporal 4, continuous tone, marching tone, and custom tone.
Uses FlashScan protocol. (CSFM: 7300-1653:0213)
B200SA-WH: Same as B200S-WH, ULC listing
B200SA-IV: Same as B200S-IV, ULC listing

Page 2 of 3 — DN-60975:B • 6/26/2019

SPECIFICATIONS

Sensitivity: UL Applications: 0.5% to 4.0% per foot obscuration.

ULC is 0.5% to 3.5%
Size: 2.0" (5.3 cm) high; base determines diameter
– B300-6: 6.1" (15.6 cm) diameter
– B501: 4" (10.2 cm) diameter
For a complete list of detector bases see DN-60981
Shipping weight: 3.4 oz. (95 g)
Operating temperature range:
• FST-951, FST-951R Series: –4°F to 100°F (–20°C to 38°C)
• FST-951H Series: –4°F to 150°F (–20°C to 66°C)
Detector spacing: UL approved for 50 ft. (15.24 m) center-to-cen-
ter, FM approved for 25 x 25 ft. (7.62 x 7.62 m) spacing
Relative humidity: 10% – 93% non-condensing
Thermal ratings: fixed-temperature set point 135°F (57°C), rate-of-
rise detection 15°F (8.3°C) per minute, high temperature heat 190°F
(88°C)
Mounting: B300-6(A) flanged base, included
See “Product Line Information: Intelligent Bases,” if using a dif-
ferent base.
ELECTRICAL SPECIFICATIONS
Voltage range: 15 - 32 volts DC peak
Standby current (max. avg.): 200µA @ 24 VDC (one communica-
tion every 5 seconds with LED enabled)
Max current: 4.5 mA @ 24 VDC (“ON”)

Listings and Approvals

Listings and approvals below apply to the FST-951 Series detectors.
In some cases, certain modules may not be listed by certain
approval agencies, or listing may be in process. Consult factory for
latest listing status.
• UL/ULC Listing: S747
• FM Approved
• CSFM: 7270-0028:0502

This document is not intended to be used for installation purposes.

We try to keep our product information up-to-date and accurate.
We cannot cover all specific applications or anticipate all requirements.
All specifications are subject to change without notice.
NOTIFIER FlashScan® and NOTIFIER® are registered trademarks of Honeywell
12 Clintonville Road International, Inc.
Northford, CT 06472 ©2019 by Honeywell International Inc. All rights reserved. Unauthorized
203.484.7161 use of this document is strictly prohibited.

www.notifier.com Country of Origin: Mexico