Professional Documents
Culture Documents
Silbond and Silaid (M) - Rev 03-12-2017
Silbond and Silaid (M) - Rev 03-12-2017
The Supreme is the acknowledged leader of India’s plastic industry. With a portfolio of over 7500 diverse products, the most
comprehensive range in the industry, we cater to almost every conceivable need and application of the customer in piping.
While helping the country transit from conventional to modern piping, we have several path breaking products to our credit
making us a trend setter in the industry.
After successfully introducing aquagold uPVC high pressure plumbing system and lifeline C-PVC hot and cold water
plumbing system, Supreme is now pleased to introduce yet another international quality product called Solvent Cements and
Primer for uPVC and C-PVC piping systems under the brand name of ‘SILBOND’. In addition to this, two more important and
useful products i.e. Rubber Lubricant and Thread Sealant are introduced. Rubber Lubricant is introduced under the brand
name ‘SILAID’ where as Thread Sealant is introduced under the brand name of ‘BLUESIL ’. Looking at its quality and versatile
features these products are widely accepted in the market.
CM/L-2889993
Primer
RAQUA00060 60ml 48
RAQUA00100 100ml 24 Meets IS:14182 and ASTM D-2564,
RAQUA00250 250ml 24 Suitable up to 50mm (2") diameter
RAQUA00500 500ml 12 for SCH 40
RAQUA01000 1000ml 12
RAQUM00015 15ml (tube) 24
PVC Medium Bodied RAQUM00030 30ml (tube) 24
RAQUM00060 60ml (tube) 24 Meets IS:14182 and ASTM D-2564,
Suitable upto 150mm (6") diameter
RAQUM00061 60ml 48
for SCH 40 and 32mm (1¼")
RAQUM00100 100ml 24
diameter for SCH 80
RAQUM00250 250ml 24
RAQUM00500 500ml 12
RAQUM01000 1000ml 12
PVC Heavy Bodied
RAQUH00060 60ml 48 Meets IS:14182 and ASTM D-2564,
RAQUH00100 100ml 24 Suitable upto 300mm (12") diameter
RAQUH00250 250ml 24 for SCH 40 and 150mm (6") diameter
RAQUH00500 500ml 12 for SCH 80
RAQUH01000 1000ml 12
RBLUE00100 100gm 30
‘BLUESIL’ is specially designed
RBLUE00250 250gm 24
for threaded joints like fittings,
RBLUE00500 500gm 12 valves etc.
RBLUE01000 1000gm 12
Rubber Lubricant
Lubricant is normally used for joining any pressure or non pressure Salient features
pipes having rubber seal type joints. Recently, we have made • Non-flammable, non-toxic, non-corrosive
available a very good quality lubricant which is offered in different • Will not harm rubber gasket or plastic pipe
packing. The unique features of this quality product are:- • Safe for drinking/potable water application
• Doesn’t promote bacterial growth
• No odor
Consumption of rubber lubricant • Water dispersible
• Easy spreading
Size in mm 75 110 160
No. of joints/kg. Direction for use
500 300 200
• Clean and dry jointing surfaces with a clean cloth.
• Apply rubber lubricant evenly on pipe or fitting spigot
Application and the sealing ring.
For easy and quick rubber seal joints of uPVC Pressure, Soil, Waste • Insert the pipe fully in the fitting socket with light
and Rainwater (S.W.R.) Drainage System, PE and PP systems. twisting motion.
Cutting the pipe: Cut the pipe at 90° using a hand saw with suitable Consumption of solvent cement - C-PVC
guide or by pipe cutter. Pipe size (mm) 15 20 25 32 40 50 65 80 100 150 200 250
Joint preparation: Chamfer or deburr pipe or both, approximately No. of fittings 1200 750 500 450 325 225 50 40 30 10 5 3-4
at 10-15° angle and remove burrs. per litre
Cleaning: Remove any dirt, moisture or grease from pipe and Safe handling of solvents
fitting sockets with a clean dry rag. When using solvent cement, there are some safety precautions all
Marking: Mark the pipe end with a bell depth line which will show users should keep in mind.
the full depth of penetration inside the pipe/fitting socket. 1. Avoid prolonged breathing of solvent vapors. When pipe and
Test dry fit the joint: Check that the fitment is correct and the joint fittings are being joined in enclosed areas, the use of mask is
is not too tight or loose. recommended .
2. Keep cement from all sources of ignition, heat, sparks, and open
Application of solvent cement: While making a joint, apply
flame.
cement lightly but uniformly to the inner surface of the socket and
3. Keep containers of cement tightly closed after use
the outer surface of pipe end with a natural bristle nylon brush or
4. Avoid eye and skin contact.
suitable applicator. Apply a second coat of cement to the pipe end.
5. Store solvent cements and piping components in cool area .
Apply cement quickly to prevent it from drying and make sure to
completely cover all jointing surface area of the pipe and fitting. Do Precautions
not apply excessive cement in bell socket. 1. Jointing should not be done in atmospheric temperatures
Assembly of joint: Immediately after applying the last coat of below 2°C
cement to the pipe and while cement is still not dry (within 10-20 2. Pipes and fittings should be clean before joining
second), forcefully bottom the male end of the pipe in the socket, 3. Brushes must be clean and dry before commencing solvent
giving pipe or fitting ¼th turn (but not after pipe is bottomed) to welding process.
distribute the cement evenly. Remove excess cement from the pipe 4. The cement should be used within the expiry period
at the end of the fitting socket. The joint must not be disturbed or mentioned on the container.
pressurized immediately after cementing to ensure proper curing 5. When the system is to be concealed, it should be pressure
which takes about 12 hours. tested before concealment.
6. Do not attempt cementing in the rain or in the presence of
moisture.
Strength of solvent type joint depends on
1. Quality of solvent cement. Recommended joint curing chart for solvent cements
2. Cleanliness/dryness of the Cure time
surfaces to be bonded. (Test pressure up to 12.5 kgf/cm2)
Ambient
3. Uniform application of solvent
cement. temperature Pipe size Pipe size Pipe size
4. Avoidance of accumulation of up to 1¼" 1½" to 3" 3" to 6"
adhesive. -5° to +5°C 6 hr 12 hr 36 hr
5. Waiting time and setting time 5° to 15°C 2 hr 4 hr 12 hr
depending on ambient 15° to 45°C 1 hr 2 hr 6 hr
temperature and pipe size.
• Any specification can change without prior notice. • All information contained in this literature is given in good faith and believed to be accurate and reliable. But because of many factors
which may be outside our knowledge and control and affect the use of the product, no warranty is given or is to be implied with respect to such information, nor do we offer any warranty of
immunity against patent infringement. No responsibility can be accepted for any error, omissions or incorrect assumptions.
The Supreme Industries Ltd. (Plastic Piping Division) Branch Offices ' Tel.
Corporate Office: 1161/1162, Solitair Corporate Park, Ahmedabad : 079-30028371
Building No. 11,167, Guru Hargovindji Marg, Chakala, Bangalore : 080-30913715
Andheri Ghatkopar Link Road, Andheri (East) Mumbai - 400 093. India. Chennai : 044-39811182
Tel: 91-22-67710000, 40430000 Cochin : 0484-2385346
Hyderabad : 040-23221130
Regd. Office: 612 Raheja Chambers, Nariman Point, Indore : 0731-2432684
Mumbai 400 021. India. Tel.: (022) 22851656, 22820072 Jaipur : 09910995853
E-mail: pvc-pipes@supreme.co.in Website: www.supreme.co.in Jalgaon Gadegaon : 0257-3050541,42
Export Division: Tel: 91-22-6771 0126 / 4043 0126; Fax: 6771 0130 Kanpur : 0512-2332280
Overseas Office: Sharjah, UAE. Tel# +971 6 557 4484; Fax# +971 6 557 4485 Kolkata : 033-30070123
Noida (Delhi) : 0120-6660000 I & T SIL Gadegaon, Dist-Jalgaon=PC/SCRL/MKG/78=REV.03-12/2017
CIN: L35920MH1942PLC003554