Srs Airbag Control System: Section

RESTRAINTS
SRS AIRBAG CONTROL SYSTEM

SECTION SRC B
E
CONTENTS
BASIC INSPECTION .................................... 6 DTC/CIRCUIT DIAGNOSIS ......................... 26 F
DIAGNOSIS AND REPAIR WORK FLOW ......... 6 B1001, B1002, B1003, B1004, B1005 DIAG-
Work Flow ................................................................. 6 NOSIS SENSOR UNIT ...................................... 26 G
Description ...............................................................26
INSPECTION AND ADJUSTMENT ..................... 9 DTC Logic ................................................................26
ADDITIONAL SERVICE WHEN REPLACING Diagnosis Procedure ...............................................26
SRC
CONTROL UNIT .......................................................... 9 B1006, B1007, B1008, B1009, B1010 DIAG-
ADDITIONAL SERVICE WHEN REPLACING
NOSIS SENSOR UNIT ...................................... 28
CONTROL UNIT : Description .................................. 9
Description ...............................................................28 I
ADDITIONAL SERVICE WHEN REPLACING
DTC Logic ................................................................28
CONTROL UNIT : Special Repair Requirement ...... 9
Diagnosis Procedure ...............................................28
ZERO POINT RESET .................................................. 9 J
ZERO POINT RESET : Description .......................... 9
B1011, B1012, B1013, B1014, B1015 DIAG-
ZERO POINT RESET : Special Repair Require- NOSIS SENSOR UNIT ...................................... 30
ment .......................................................................... 9 Description ...............................................................30
DTC Logic ................................................................30 K
SYSTEM DESCRIPTION ............................. 11 Diagnosis Procedure ...............................................30
SRS AIR BAG SYSTEM .....................................11 B1017, B1020, B1021 OCCUPANT SYSTEM L
System Diagram ...................................................... 11 CONTROL UNIT ................................................ 32
System Description ................................................. 11 Description ...............................................................32
Component Parts Location ...................................... 13 DTC Logic ................................................................32
M
Component Description ........................................... 14 Diagnosis Procedure ...............................................32
OCCUPANT DETECTION SYSTEM ..................15 B1018 OCCUPANT SYSTEM SENSOR ........... 34

System Diagram ...................................................... 15 Description ...............................................................34 N
System Description ................................................. 15 DTC Logic ................................................................34
Component Parts Location ...................................... 16 Diagnosis Procedure ...............................................34
Component Description ........................................... 17 O
B1022 OCCUPANT SYSTEM CONTROL
ON BOARD DIAGNOSTIC (OBD) SYSTEM ......18 UNIT .................................................................. 36
Diagnosis Description ............................................. 18 Description ...............................................................36
Diagnosis with Air Bag Warning Lamp .................... 18 DTC Logic ................................................................36 P
Diagnosis Procedure ...............................................36
DIAGNOSIS SYSTEM (AIR BAG) .....................24
CONSULT Function ................................................ 24 B1023 PASSENGER AIR BAG OFF INDICA-
TOR ................................................................... 38
DIAGNOSIS SYSTEM (OCCUPANT DETEC- Description ...............................................................38
TION SYSTEM) ..................................................25 DTC Logic ................................................................38
CONSULT Function ................................................ 25
Revision: 2013 October SRC-1 2014 CUBE

Diagnosis Procedure .............................................. 38 B1058, B1059, B1060, B1061, B1062, B1063
DIAGNOSIS SENSOR UNIT ............................. 62
B1025, B1032, B1048 OCCUPANT SYSTEM Description .............................................................. 62
SENSOR ............................................................ 40 DTC Logic ............................................................... 62
Description .............................................................. 40 Diagnosis Procedure ............................................... 62
DTC Logic ............................................................... 40
Diagnosis Procedure .............................................. 40 B1065, B1070 PASSENGER AIR BAG MOD-
ULE .................................................................... 64
B1026, B1027, B1028, B1029, B1030, B1031 Description .............................................................. 64
DIAGNOSIS SENSOR UNIT .............................. 42 DTC Logic ............................................................... 64
Description .............................................................. 42 Diagnosis Procedure ............................................... 64
DTC Logic ............................................................... 42
Diagnosis Procedure .............................................. 42 B1066, B1071 PASSENGER AIR BAG MOD-
ULE .................................................................... 66
B1033, B1034 CRASH ZONE SENSOR ........... 44 Description .............................................................. 66
Description .............................................................. 44
DTC Logic ............................................................... 66
DTC Logic ............................................................... 44
Diagnosis Procedure ............................................... 66
Diagnosis Procedure .............................................. 44
B1067, B1072 PASSENGER AIR BAG MOD-
B1035 CRASH ZONE SENSOR ........................ 46
ULE .................................................................... 68
Description .............................................................. 46
Description .............................................................. 68
DTC Logic ............................................................... 46
DTC Logic ............................................................... 68
B1036 CRASH ZONE SENSOR ........................ 48
B1068, B1073 PASSENGER AIR BAG MOD-
Description .............................................................. 48
DTC Logic ............................................................... 48
ULE .................................................................... 70
Diagnosis Procedure .............................................. 48 Description .............................................................. 70
DTC Logic ............................................................... 70
B1037, B1039, B1041 CRASH ZONE SEN- Diagnosis Procedure ............................................... 70
SOR .................................................................... 50
B1074, B1075, B1076, B1077, B1078, B1079
Description .............................................................. 50
DTC Logic ............................................................... 50
DIAGNOSIS SENSOR UNIT ............................. 72
Description .............................................................. 72
DTC Logic ............................................................... 72
B1042, B1043, B1044, B1045, B1046, B1047 Diagnosis Procedure ............................................... 72
DIAGNOSIS SENSOR UNIT .............................. 52
B1080, B1096 DRIVER AIR BAG MODULE ..... 74
Description .............................................................. 52
Description .............................................................. 74
DTC Logic ............................................................... 52
DTC Logic ............................................................... 74
B1081 SEAT BELT PRE-TENSIONER RH ....... 76
Description .............................................................. 54
Description .............................................................. 76
DTC Logic ............................................................... 54
DTC Logic ............................................................... 76
Description .............................................................. 56
Description .............................................................. 78
DTC Logic ............................................................... 56
DTC Logic ............................................................... 78
Description .............................................................. 58
Description .............................................................. 80
DTC Logic ............................................................... 58
DTC Logic ............................................................... 80
Description .............................................................. 60
Description .............................................................. 82
DTC Logic ............................................................... 60
DTC Logic ............................................................... 82

B1086 SEAT BELT PRE-TENSIONER LH ........84 B1122, B1123, B1124, B1125, B1126, B1127
Description .............................................................. 84 DIAGNOSIS SENSOR UNIT ........................... 108 A
DTC Logic ............................................................... 84 Description ............................................................. 108
Diagnosis Procedure ............................................... 84 DTC Logic .............................................................. 108
Diagnosis Procedure ............................................. 108 B
B1087 SEAT BELT PRE-TENSIONER LH ........86
Description .............................................................. 86 B1129 SIDE AIR BAG MODULE RH .............. 110
Diagnosis Procedure ............................................... 86 DTC Logic .............................................................. 110 C
Diagnosis Procedure ............................................. 110
B1088 SEAT BELT PRE-TENSIONER LH ........88
Description .............................................................. 88 B1130 SIDE AIR BAG MODULE RH .............. 112 D
Diagnosis Procedure ............................................... 88 DTC Logic .............................................................. 112
B1089 SEAT BELT PRE-TENSIONER LH ........90 E
Description .............................................................. 90 B1131 SIDE AIR BAG MODULE RH .............. 114
Diagnosis Procedure ............................................... 90 DTC Logic .............................................................. 114 F
B1090, B1091, B1092, B1093, B1094, B1095
DIAGNOSIS SENSOR UNIT ..............................92 B1132 SIDE AIR BAG MODULE RH .............. 116
Description .............................................................. 92 Description ............................................................. 116 G
DTC Logic ............................................................... 92 DTC Logic .............................................................. 116
Diagnosis Procedure ............................................... 92 Diagnosis Procedure ............................................. 116
SRC
B1106, B1107, B1108, B1109, B1110, B1111 B1134 SIDE AIR BAG MODULE LH .............. 118
DIAGNOSIS SENSOR UNIT ..............................94 Description ............................................................. 118
Description .............................................................. 94 DTC Logic .............................................................. 118
Diagnosis Procedure ............................................. 118 I
DTC Logic ............................................................... 94
B1135 SIDE AIR BAG MODULE LH .............. 120
B1113, B1114 SATELLITE SENSOR RH ..........96 Description ............................................................. 120 J
DTC Logic ............................................................... 96 Diagnosis Procedure ............................................. 120
Diagnosis Procedure ............................................... 96 K
B1115 SATELLITE SENSOR RH ......................98 Description ............................................................. 122
DTC Logic ............................................................... 98 Diagnosis Procedure ............................................. 122 L
B1116 SATELLITE SENSOR RH .................... 100 Description ............................................................. 124
DTC Logic .............................................................. 124 M
Description ............................................................ 100
DTC Logic ............................................................. 100 Diagnosis Procedure ............................................. 124
B1138, B1139, B1140, B1141, B1142, B1143 N
B1118, B1119 SATELLITE SENSOR LH ........ 102 DIAGNOSIS SENSOR UNIT ........................... 126
Description ............................................................ 102 Description ............................................................. 126
DTC Logic ............................................................. 102 DTC Logic .............................................................. 126 O
Diagnosis Procedure ............................................. 102 Diagnosis Procedure ............................................. 126
B1120 SATELLITE SENSOR LH ..................... 104 B1144 DIAGNOSIS SENSOR UNIT ............... 128
Description ............................................................ 104 Description ............................................................. 128 P
DTC Logic ............................................................. 104 DTC Logic .............................................................. 128
B1121 SATELLITE SENSOR LH ..................... 106 B1145 CURTAIN AIR BAG MODULE RH ...... 129
Description ............................................................ 106 Description ............................................................. 129
DTC Logic ............................................................. 106 DTC Logic .............................................................. 129

B1146 CURTAIN AIR BAG MODULE RH ....... 131 DTC Logic ............................................................. 153
Description .............................................................131 Diagnosis Procedure ............................................. 153
DTC Logic ..............................................................131
Diagnosis Procedure .............................................131 B1210 SIDE COLLISION DETECTION ............ 154
Description ............................................................ 154
DTC Logic ..............................................................133
Diagnosis Procedure .............................................133 B1211 ROLLOVER DETECTION ..................... 155
Description ............................................................ 155
DTC Logic ..............................................................135
Diagnosis Procedure .............................................135 B1212, B1213, B1214 SATELLITE SENSOR
RH ..................................................................... 156
B1150 CURTAIN AIR BAG MODULE LH ....... 137 Description ............................................................ 156
Description .............................................................137 DTC Logic ............................................................. 156
DTC Logic ..............................................................137 Diagnosis Procedure ............................................. 156
Diagnosis Procedure .............................................137
B1215, B1216, B1217 SATELLITE SENSOR
B1151 CURTAIN AIR BAG MODULE LH ....... 139 LH ..................................................................... 158
Description .............................................................139 Description ............................................................ 158
DTC Logic ..............................................................139 DTC Logic ............................................................. 158
Diagnosis Procedure .............................................139 Diagnosis Procedure ............................................. 158
B1152 CURTAIN AIR BAG MODULE LH ....... 141 B1218, B1219, B1220, B1221, B1222, B1223
Description .............................................................141 DIAGNOSIS SENSOR UNIT ............................ 160
DTC Logic ..............................................................141 Description ............................................................ 160
Diagnosis Procedure .............................................141 DTC Logic ............................................................. 160
B1153 CURTAIN AIR BAG MODULE LH ....... 143
Description .............................................................143 B1239 DIAGNOSIS SENSOR UNIT ................. 162
DTC Logic ..............................................................143 Description ............................................................ 162
Diagnosis Procedure .............................................143 DTC Logic ............................................................. 162
B1154, B1155, B1156, B1157, B1158, B1159
DIAGNOSIS SENSOR UNIT ............................ 145 ECU DIAGNOSIS INFORMATION ............ 163
Description .............................................................145
DTC Logic ..............................................................145 DIAGNOSIS SENSOR UNIT ............................ 163
Diagnosis Procedure .............................................145 DTC Index ............................................................ 163
Wiring Diagram - SRS AIR BAG CONTROL SYS-
B1170, B1171, B1172, B1173, B1174, B1175 TEM - .................................................................... 166
DIAGNOSIS SENSOR UNIT ............................ 147
Description .............................................................147 SYMPTOM DIAGNOSIS ........................... 172
DTC Logic ..............................................................147
Diagnosis Procedure .............................................147 SRS AIR BAG WARNING LAMP DOES NOT
TURN OFF ........................................................ 172
B1186, B1187, B1188, B1189, B1190, B1191 Diagnosis Procedure ............................................. 172
Description .............................................................149 SRS AIR BAG WARNING LAMP DOES NOT
DTC Logic ..............................................................149 TURN ON .......................................................... 173
Diagnosis Procedure .............................................149 Diagnosis Procedure ............................................. 173
B1202, B1203, B1204, B1205, B1206, B1207 PRECAUTION ........................................... 174

PRECAUTIONS ................................................ 174
Description .............................................................151
Precautions for Removing of Battery Terminal ..... 174
DTC Logic ..............................................................151
Precaution for Supplemental Restraint System
Diagnosis Procedure .............................................151
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN-
B1209 FRONTAL COLLISION DETECTION . 153 SIONER" ............................................................... 174
Description .............................................................153 Service .................................................................. 174

Occupant Detection System Precaution ............... 175
A
SRC

DIAGNOSIS AND REPAIR WORK FLOW
< BASIC INSPECTION >
BASIC INSPECTION
Work Flow INFOID:0000000009946080
OVERALL SEQUENCE
JMHIA1324GB
DETAILED FLOW

1.INTERVIEW THE CUSTOMER FOR THE SYMPTOM A
Interview the customer for the symptom (the condition and the environment when the incident/malfunction
occurs).
B
>> GO TO 2.
2.CHECK SYMPTOM
C
Check the symptom from the customer information.
>> GO TO 3. D
3.CHECK WARNING LAMP OPERATION
Check air bag warning lamp operation in the user mode. Refer to SRC-18, "Diagnosis with Air Bag Warning
Lamp". E
Are any malfunction detected?
YES >> GO TO 5.
NO >> GO TO 4. F
4.CHECK LOW VOLTAGE
Check low voltage with CONSULT. Refer to SRC-24, "CONSULT Function". G
Are any malfunction detected?
YES >> GO TO 9.
NO >> Check intermittent incident. Refer to GI-40, "Intermittent Incident". SRC
5.CHECK SELF DIAGNOSTIC RESULTS
Check self diagnostic result with CONSULT or diagnosis mode.
If it is impossible to switch to diagnosis mode, follow the same procedure that DTC is not detected. I
NOTE:
Perform the following procedure if DTC is detected.
• Record DTC (Print them out with CONSULT.) J
• Erase self diagnostic result.
• Study the relationship between the malfunction that DTC or air bag warning lamp indicates and the symptom
that the customer describes.
• Check related service bulletins for information. K
Is DTC detected?
YES >> GO TO 6.
L
NO >> GO TO 7.
6.PERFORM DTC CONFIRMATION PROCEDURE
Perform DTC CONFIRMATION PROCEDURE for the DTC. M
>> GO TO 8.
N
7.PERFORM DIAGNOSIS ACCORDING TO WARNING LAMP OPERATION
1. Check air bag warning lamp operation in the user mode. Refer to SRC-18, "Diagnosis with Air Bag Warn-
ing Lamp". O
2. Perform Diagnosis Procedure for the air bag warning lamp operation. Refer to SRC-18, "Diagnosis with
Air Bag Warning Lamp" (USER MODE).
P
>> GO TO 9.
8.DETECT MALFUNCTIONING PART BY DIAGNOSTIC PROCEDURE
Inspect according to Diagnostic Procedure of the DTC.
>> GO TO 9.

9.REPAIR OR REPLACE THE MALFUNCTION PART
Repair or replace the malfunctioning part.
>> GO TO 10.
10.FINAL CHECK
Check self diagnostic result and air bag warning lamp operation in the user mode.
Is the malfunction repaired?
YES >> INSPECTION END
NO >> GO TO 2.

INSPECTION AND ADJUSTMENT
A
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description
INFOID:0000000009946081 B
When replacing or removing and installing passenger seat, always perform zero point reset so that Occupant
Detection System is activated normally.
C
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Re-
quirement INFOID:0000000009946082
D
WORK PROCEDURE WHEN REPLACING CONTROL UNIT
1.PERFORM ZERO POINT RESET E
Perform zero point reset. Refer to SRC-9, "ZERO POINT RESET : Special Repair Requirement".
>> END F
ZERO POINT RESET
ZERO POINT RESET : Description INFOID:0000000009946083
G
Zero point reset is an initializing procedure for occupant detection sensor that must be performed when replac-
ing or removing and installing passenger seat.
If zero point reset is not performed, the initialization is incomplete and Occupant Detection System does not SRC
operate normally.
NOTE:
• When replacing passenger seat with a NISSAN genuine part, air bag warning lamp blinks if zero point reset I
is incomplete.
• When zero point reset is performed once after removal and installation of passenger seat, CONSULT dis-
plays “complete” and air bag warning does not blink.
• When reinstalling passenger seat after removal, the initial value for occupant detection sensor changes, and J
Occupant Detection System does not operate normally.
• Always perform zero point reset after performing the work as per the following.
- Reinstallation of passenger seat K
- Replacement of passenger seat with a seat that is zero point reset complete.
ZERO POINT RESET : Special Repair Requirement INFOID:0000000009946084
L
1.PERFORM ZERO POINT RESET
1. Perform zero point reset.
NOTE: M
When performing zero point reset, be careful of the items described as per the following.
• Perform zero point reset after installing passenger seat to the vehicle
• Do not put any objects on passenger seat N
• Do not apply excessive vibration to the vehicle
• Do not touch the vehicle
• Do not tilt the vehicle
2. Select start on “Zero point reset function” screen from, WORK SUPPORT of CONSULT “OCCUPANT O
DETECTION”.
3. “Zero point reset” starts.
P
>> GO TO 2.
2.CONFIRMATION OF SETTING
1. Proceed to “Zero point reset function” screen from work support of CONSULT “OCCUPANT DETEC-
TION”.
2. Check that “Complete” or “Incomplete” is displayed on “Zero point reset status”.
CAUTION:

• “Complete” is displayed on “zero point reset current status” if the seat is reinstalled by seat removal
and installation, or “zero point reset” is already performed.
• “Zero point reset current status” displays “Incomplete” if a new seat is installed. When turning key
switch ON without performing zero point reset, air bag warning lamp blinks. When zero point reset is
performed, air bag warning lamp turns OFF.
• Air bag warning lamp blinks in user mode only.
• Air bag sensor unit does not record whether or not zero point reset is performed.
Is condition “ALREADY PERFORMED”?
YES >> Print out “ZERO POINT RESET CURRENT STATUS” screen, and inspection end.
NO >> Check condition as per the following, and perform zero point reset again.
• Passenger seat is occupied by an object.
• Excessive vibration is applied while performing zero point reset.
• Occupant detection system is malfunctioning.
NOTE:
If “Incomplete” is displayed on “zero point reset current status”, zero point reset is not completed
normally. Check the condition as per the following and perform zero point reset again.
• Passenger seat is occupied by an object.
• Excessive vibration is applied while performing zero point reset.
• Occupant detection system is malfunctioning.

SRS AIR BAG SYSTEM
< SYSTEM DESCRIPTION >
SYSTEM DESCRIPTION A
SRS AIR BAG SYSTEM
System Diagram INFOID:0000000009946085
B
SRC
JMHIA1078GB
N
System Description INFOID:0000000009946086
Supplemental Restraint System (SRS) activates air bag module and seal belt pre-tensioner when it detects a O
frontal collision or a side collision that is more than the specified limit. Together with other safety devices, it
reduces the impact that occupant receives when vehicle collision occurs.
Air bag diagnosis sensor unit supplies power supply to air bag module and pre-tensioner seat belt when decel-
P
eration that is more than the specified limit is detected by G sensor in air bag diagnosis sensor unit, crash
zone sensor, or satellite sensor. Air bag module is composed of electric igniter (squib), filter, pyrotechnic mate-
rial, and gas generating material. When air bag module receives a signal from air bag diagnosis sensor unit,
air bag module ignites pyrotechnic material using electric igniter (squib) so that gas generating material gener-
ates high temperature nitrogen gas. The gas through filter activates air bag. At the same time, pre-tensioner
seat belt receives power supply from air bag diagnosis sensor unit, gasgenerator is activated, and then gas is
generated. Balls in pipe are moved according to generated gas pressure and strike pinion gear on ELR shaft.
ELR shaft rotates and retracts seat belt.

SRS AIR BAG SYSTEM
AIR BAG DIAGNOSIS SENSOR UNIT FUNCTIONS
Air bag diagnosis sensor unit has the following functions.
• Detects a collision and supplies the energy for deploying air bag and seat belt pre-tensioner.
• Detects and records electrical malfunction in air bag system and seat belt pre-tensioner system, and blinking
air bag warning lamp.
• Detects and records the deployment of air bag and seat belt pre-tensioner, and turns ON air bag warning
lamp.
• Indicates malfunctioning portion via the number of blinks from the air bag warning lamp in the diagnosis
mode.
• Indicates the malfunction record via CONSULT.
• Suppresses the deployment of passenger air bag when passenger seat is empty or occupied by child or
child-seat.
• When passenger seat is occupied by child or child seat, turns ON passenger air bag OFF indicator.
• When judges that passenger seat is occupied by a adult or a child and passenger seat belt is not fasten,
turns ON seat belt warning lamp. Further information for the seat belt warning system, refer to SBC-3, "Sys-
tem Description".
COLLISION MODES
The operation of SRS is different depending on the collision modes applications. For example, the driver air
bag module, passenger air bag module, and seat belt pre-tensioner are activated in a frontal collision but not
in a side collision.
SRS configurations that are activated for the following collision modes.
×: Apply —: Not apply
SRS configuration Frontal collision Left side collision Right side collision
Driver air bag module. × — —
Passenger air bag module. × — —
Seat belt pre-tensioner LH. × — —
Seat belt pre-tensioner RH. × — —
Side air bag module LH. — × —
Side air bag module RH. — — ×
Curtain air bag module LH. — × —
Curtain air bag module RH. — — ×

SRS AIR BAG SYSTEM
Component Parts Location INFOID:0000000009946087
SRC
JMHIA1080ZZ O
1. Curtain air bag module LH/RH 2. Seat belt pre-tensioner LH/RH 3. Satellite sensor LH/RH
4. Air bag diagnosis sensor unit 5. Occupant Detection System seat 6. Occupant Detection System control P
sensor unit
7. Passenger air bag module 8. Crash zone sensor 9. Passenger air bag OFF indicator
10. Combination meter 11. Combination switch (spiral cable) 12. Driver air bag module
Refer to MWI-8, "METER SYSTEM :
Component Parts Location"
13. Seat belt buckle switch (Driver side/
Passenger side)

SRS AIR BAG SYSTEM
A. Behind headlining B. Behind center pillar lower gamish C. Behind center console assembly
D. Backside of passenger seat cushion E. Behind glove box assembly F. View with front grille removed
frame
G. View with steering wheel removed
Component Description INFOID:0000000009946088
Component Function
Detects a collision and supplies power supply for deployment to air bag module and
Air bag diagnosis sensor unit
pre-tensioner seat belt.
Air bag module
• Driver
• Passenger Receives signal from air bag diagnosis sensor unit and deploys air bag.
• Side
• Curtain
Receives signal from air bag diagnosis sensor unit and deploys seat belt pre-tension-
Seat belt pre-tensioner
er.
Seat belt buckle switch Controls deployment timing based on seat belt fastened or unfastened condition.
Crash zone sensor Transmits signal to air bag diagnosis sensor unit when a frontal collision occurs.
Satellite sensor (LH/RH) Transmits signal to air bag diagnosis sensor unit when a side collision occurs.
Detects passenger seat occupant and judges whether or not passenger seat air bag
Occupant Detection System control unit
is deployed.
Indicates air bag malfunctioning and deployment by blinking and illuminating air bag
Combination meter (air bag warning lamp)
warning lamp.
Indicates whether or not passenger air bag is in the activation mode based on the
Passenger air bag OFF indicator
judgement of Occupant Detection System.
Combination switch (spiral cable) Supplies power supply to driver air bag module on steering wheel.

OCCUPANT DETECTION SYSTEM
A
System Diagram INFOID:0000000009946089
OCCUPANT DETECTION SYSTEM B
G
JMHIA1079GB
System Description INFOID:0000000009946090

SRC
This Occupant Detection System has the following functions.
• Suppress the deployment of passenger air bag when passenger seat is empty, or when occupied by child
and child-seat. I
• Turns ON passenger air bag OFF indicator when passenger seat is occupied by child-seat and child.
• Indicates malfunction portion with blinking times of air bag warning lamp in diagnosis mode.
• Indicates the malfunctioning record by CONSULT. J
• When “zero point reset” for Occupant Detection System is incomplete, CONSULT indicates that “zero point
reset” is incomplete. This function is applied to NISSAN genuine parts only.
NOTE:
• Operation of air bag diagnosis sensor unit when air bag diagnosis sensor unit receives information from K
Occupant Detection System.
• Even if zero point reset is “complete”, always perform zero point reset after the removal and installation of
seat or the removal of control unit harness connector. L
Status (passenger seat) Passenger air bag Passenger air bag OFF in- Air bag warning lamp
dicator
M
Empty Suppress OFF OFF
An object Suppress ON OFF
Child/ child-seat Suppress ON OFF N
Adult Enable to deploy OFF OFF
Malfunction Suppress ON Blinking
O
Zero point reset
Not yet performed (NISSAN Suppress ON Blinking
genuine parts only)
P

Component Parts Location INFOID:0000000009946091
JMHIA1080ZZ
1. Curtain air bag module LH/RH 2. Seat belt pre-tensioner LH/RH 3. Satellite sensor LH/RH
4. Air bag diagnosis sensor unit 5. Occupant Detection System seat 6. Occupant Detection System control
sensor unit
7. Passenger air bag module 8. Crash zone sensor 9. Passenger air bag OFF indicator
10. Combination meter 11. Combination switch (spiral cable) 12. Driver air bag module
Refer to MWI-8, "METER SYSTEM :
Component Parts Location"
13. Seat belt buckle switch (Driver side/
Passenger side)

A. Behind headlining B. Behind center pillar lower gamish C. Behind center console assembly
D. Backside of passenger seat cushion E. Behind glove box assembly F. View with front grille removed A
frame
G. View with steering wheel removed
B
Component Description INFOID:0000000009946092
Component parts Outline of function

C
Occupant Detection System sensor Detects if the passenger seat is empty or occupied
Occupant Detection System control unit Transmits the passenger seat status (occupied or empty) to air bag diagnosis sensor unit D
Turns the passenger air bag OFF indicator lamp ON when the passenger seat is occupied
Passenger air bag OFF indicator
by a child or a child-seat
• Performs the deploy judgement of passenger air bag based on the information from Oc- E
cupant Detection System control unit.
Air bag diagnosis sensor unit
• Passenger air bag OFF indicator turns ON or turns OFF when passenger state signal de-
tected by Occupant Detection System control unit is received.
F
SRC

ON BOARD DIAGNOSTIC (OBD) SYSTEM
Diagnosis Description INFOID:0000000009946093
CAUTION:
• Never use electrical test equipment on any circuit related to the SRS unless instructed in this Ser-
vice Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness
connectors.
• Never repair, splice or modify the SRS wiring harness. If the harness is damaged, replace it with a
new one.
• Keep ground portion clean.
DIAGNOSIS FUNCTION
• The SRS self-diagnosis results can be read with air bag warning lamp and/or CONSULT.
• The user mode is exclusively prepared for the customer (driver). This mode warns the driver of a system
malfunction through the operation of the air bag warning lamp.
• The diagnosis mode allows the technician to locate and inspect the malfunctioning part.
• The mode applications for the air bag warning lamp and CONSULT are as per the following items.
×: Application, —: Not application
Diagnosis tool User mode Diagnosis mode
Air bag warning lamp × ×
CONSULT – ×
Diagnosis with Air Bag Warning Lamp INFOID:0000000009946094
SELF DIAGNOSIS FUNCTION

There are two self diagnosis functions with air bag warning lamp per the following items.
• USER MODE
• DIAGNOSIS MODE
CHANGE DIAGNOSIS MODE
• Diagnosis mode changes from user mode to diagnosis mode when changing operation is performed.
• In user mode, when SRS air bag warning lamp is not blinking, changing to diagnosis mode by ignition switch
operation is not possible.
• In diagnosis mode, when repair is complete and system is normal, the mode changes to user mode when
ignition switch is turned from OFF to ON.
PROCEDURE TO CHANGE DIAGNOSIS MODE
1. Turn ignition switch from OFF to ON.
2. SRS air bag lamp turns ON for 7 second and turns OFF, then turn ignition switch OFF within 1second after
the lamp turns OFF.
3. After turning ignition switch OFF, wait for 3 seconds or more.
4. Repeat operation 1 to 3 for 2 times so that operation 1 to 3 is repeated for 3times in total.
5. Turn ignition switch from OFF to ON. Diagnosis mode changes.
USER MODE
In USER MODE, air bag warning lamp on combination meter blinks when a malfunction is detected and warns
the customer (driver).
How to Read Air Bag Warning Lamp
1. Turn the ignition switch from OFF to ON, and check that the air bag warning lamp blinks.
2. Compare the air bag warning lamp blinking pattern with the examples.
Air Bag Warning Lamp Examples

Air bag warning lamp operation (user mode) SRS condition Reference item A
• No malfunction is detected
—
• No further action is necessary C
D
SHIA0011E
Erase “Self Diagnostic Result”

• The system is malfunctioning E
Refer to SRC-24, "CONSULT Func-
• Self diagnostic result is not erased af-
tion", How to Erase Self-diagnostic
ter repair
Result
Check “Cause of Warning Lamp” F
with CONSULT.
Battery voltage is low (less than 9 V)
Refer to SRC-24, "CONSULT Func-
tion"
G
Go to SRC-9, "ZERO POINT RE-
Zero point reset is not completed
SET : Description"
Intermittent malfunction is detected in
SHIA0012E Go to GI-40, "Intermittent Incident" SRC
the past
Go to SRC-153, "Diagnosis Proce-
• Air bag is deployed
dure" or SRC-154, "Diagnosis Pro-
• Seat belt pre-tensioner is deployed
cedure" I
• Air bag diagnosis sensor unit is mal-

functioning J
• Air bag power supply circuit is mal- Go to SRC-172, "Diagnosis Proce-
functioning dure"
• Air bag warning lamp circuit is mal-
K
functioning
SHIA0013E
• Air bag diagnosis sensor unit is mal- M

functioning Go to SRC-173, "Diagnosis Proce-
• Air bag warning lamp circuit is mal- dure"
functioning
N
SHIA0014E O
DIAGNOSIS MODE
The diagnosis mode can only be switched when a malfunction is detected in the user mode. Malfunctioning
P
system is indicated according to blinking pattern of air bag warning lamp.
How to Read Air Bag Warning Lamp
1. Follow the procedures of “PROCEDURE TO CHANGE DIAGNOSIS MODE”, and switch to the diagnosis
mode.
2. Turn ignition switch ON. Check the blinking pattern of air bag warning lamp.
There are 2 blinking patterns for the air bag warning lamp as per the following items.
• Front air bag system: 3 second blink followed by a 0.5 second blink repeated.

• Side air bag system: Two 1.5 second blinks followed by a 0.5 second blink repeated.
Front air bag system
Number of 0.5 second blinks Malfunctioning items Blinking pattern
Refer to the following items
• Self-diagnostic result is not erased after repair • Refer to How to Erase Self-di-
0
• Intermittent malfunction is detected in the past agnostic Result
• GI-40, "Intermittent Incident"
• SRC-76, "DTC Logic"
1 Seat belt pre-tensioner RH • SRC-78, "DTC Logic"
2 Driver air bag module
3 Seat belt pre-tensioner LH • SRC-86, "DTC Logic"
5 Occupant Detection System control unit • SRC-34, "DTC Logic"
6 Crash zone sensor • SRC-46, "DTC Logic"
7 Air bag diagnosis sensor unit
8 Passenger air bag module • SRC-66, "DTC Logic"
11 Passenger air bag OFF indicator Refer to SRC-38, "DTC Logic".
17 Air bag diagnosis sensor unit Refer to SRC-128, "DTC Logic"

Side air bag system
Number of 0.5-second blinks Malfunctioning items Blinking pattern A
1 Side air bag module RH • SRC-112, "DTC Logic"
B
• SRC-118, "DTC Logic" C
2 Side air bag module LH • SRC-120, "DTC Logic"
D
3 Satellite sensor RH • SRC-98, "DTC Logic"
• SRC-100, "DTC Logic" E
• SRC-102, "DTC Logic" F
4 Satellite sensor LH • SRC-104, "DTC Logic"
G
5 Curtain air bag module RH • SRC-131, "DTC Logic"
• SRC-133, "DTC Logic" SRC
6 Curtain air bag module LH • SRC-139, "DTC Logic" I
How to Erase Self Diagnosis Result J

After a malfunction is repaired, turn the ignition switch OFF for one second or more, then turn ignition switch
ON. The diagnosis mode returns to the user mode. At that time the self-diagnosis result is cleared.
K
EXAMPLE OF AIR BAG WARNING LAMP OPERATION IN THE DIAGNOSIS MODE
System Normal
When system is normal. L
JMHIA0945GB
O
Single System Malfunction
• Front air bag system
P

When air bag diagnosis sensor unit system (Item display 1) is malfunctioning.
JMHIA0946GB
• Side air bag system

When curtain air bag module LH system (Item display 1) is malfunctioning.
JMHIA0948GB
Multiple Systems Malfunction

• Front air bag system
When driver air bag module (Item display 1) and air bag diagnosis sensor unit system (Item display 2) are
malfunctioning.
JMHIA0947GB
• Side air bag system

When satellite sensor LH (Item display1) and curtain air bag module LH system (Item display 2) are malfunc-
tioning.
JMHIA0949GB
• Front air bag system and side air bag system

When driver air bag module (Item display 1) and satellite sensor RH (Item display2) are malfunctioning.
A
JMHIA0950GB
SRC

DIAGNOSIS SYSTEM (AIR BAG)
DIAGNOSIS SYSTEM (AIR BAG)
CONSULT Function INFOID:0000000009946095
APPLICATION ITEM
CONSULT performs the following functions.
Diagnosis mode Description

Air bag diagnosis sensor unit ECU discriminated number (identification number) or part num-
ECU Identification ber is displayed. Air bag diagnosis sensor unit has individual ECU discriminated number
(identification number) or part number based on model and equipment.
• Self-diagnosis result is displayed.
Refer to SRC-163, "DTC Index".
• “No DTC” is displayed when repair is completed by part replacement or other operations.
Self Diagnostic Result • “SELF-DIAG RESULT [MEMORY]” is displayed until “Erase” is performed.
CAUTION:
When “No DTC” is displayed after repair, always perform “Erase”. If this is not done
SRS air bag warning lamp remains blinking when user mode is resumed.
With TROUBLE DIAG RECORD, diagnosis results previously erased by a reset operation
TROUBLE DIAG RECORD
can be displayed on CONSULT screen.
NOTE:
SELF-DIAG RESULTS [CAN]
This item is displayed, but cannot be supported.
Cause of Warning Lamp It displays the cause of warning lamp illumination that is not recorded in memory.
CAUSE OF WARNING LAMP

This item indicates IGN low voltage condition.
The air bag warning lamp blink in user mode when the battery voltage is lowered to the voltage value (less
than 9 V) at which the SRS cannot be operated normally. The air bag warning lamp turns OFF after the battery
voltage returns to normal status after blinking.
In such a case, the DTC memory is not performed and changing to the self-diagnostic mode by IGN operation
cannot be performed while the air bag warning lamp illuminates. “NO DTC” is displayed even if the malfunc-
tioning parts are checked by CONSULT.
This function records the following items.
Display contents of CONSULT Description

“LOW” is displayed when IGN low voltage is detected. If not, “OK” is dis-
IGN VOLT COND
played.
Air bag
IGN VOLT TIME Times of IGN low voltage is detected.
LOW V RECORED Times of IGN ON after IGN low voltage is detected.

DIAGNOSIS SYSTEM (OCCUPANT DETECTION SYSTEM)
DIAGNOSIS SYSTEM (OCCUPANT DETECTION SYSTEM)
A
CONSULT Function INFOID:0000000009946096
ZERO POINT RESET DESCRIPTION B

This vehicle adopts occupant detection system with a weight detecting method. When replacing, or removing
and installing passenger seat, always perform “zero point rest” so that the vehicle recognizes zero point.
If zero point reset is incomplete, occupant detection sensor does not operate normally. C
WORK SUPPORT
Monitor item Description D

Perform zero point reset. Refer to SRC-9, "ZERO POINT RE-
Zero point reset function
SET : Special Repair Requirement".
E
SRC

B1001, B1002, B1003, B1004, B1005 DIAGNOSIS SENSOR UNIT
< DTC/CIRCUIT DIAGNOSIS >
DTC/CIRCUIT DIAGNOSIS
Description INFOID:0000000009946097
• It detects a shock that is more than the specified level and monitors whether the driver and passenger air
bags, side air bag, curtain air bag, and pre-tensioner seat belts operate normally.
• It contains the “G” sensors for both frontal and side collisions and spare battery function in case of main bat-
tery damage in collision.
DTC Logic INFOID:0000000009946098
DTC DETECTION LOGIC
Display contents of
DTC DTC detecting condition Possible cause
CONSULT
B1001
B1002
B1003 CONTROL UNIT Air bag diagnosis sensor unit is malfunctioning Malfunction in air bag diagnosis sensor unit
B1004
B1005
DTC CONFIRMATION PROCEDURE

1.CHECK SELF-DIAG RESULT
With CONSULT
1. Turn ignition switch ON.
2. Perform “AIR BAG” Self Diagnostic Result.
Without CONSULT
2. Check the air bag warning lamp status. Refer to SRC-18, "Diagnosis with Air Bag Warning Lamp".
NOTE:
SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.
Is malfunctioning part detected?
YES >> Refer to SRC-26, "Diagnosis Procedure".
NO >> INSPECTION END
Diagnosis Procedure INFOID:0000000009946099
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait 3 minutes
or more. (To discharge backup capacitor.)
• Never use unspecified tester or other measuring device.
1.CHECK HARNESS CONNECTOR
Check the harness connector.
Is the inspection result normal?
YES >> GO TO 2.
NO >> Replace harness connectors.
2.CHECK WIRING HARNESS
Check the wiring harness externals.
YES >> GO TO 3.
NO >> Replace wiring harness.
3.REPLACE AIR BAG DIAGNOSIS SENSOR UNIT
1. Replace air bag diagnosis sensor unit. Refer to SR-26, "Exploded View".

2. Perform DTC confirmation procedure. Refer to SRC-26, "DTC Logic".
Is DTC detected? A
YES >> GO TO 1.
B
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
B1006
B1007
B1009
B1010

With CONSULT
2. Perform “AIR BAG” Self-Diagnostic Result.
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
1. Replace air bag diagnosis sensor unit. Refer to SR-26, "Exploded View"
2. Perform DTC confirmation procedure. Refer to SRC-28, "DTC Logic"
Is DTC detected?

YES >> GO TO 1.
NO >> INSPECTION END A
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
B1011
B1012
B1014
B1015

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?

YES >> GO TO 1.
NO >> INSPECTION END A
SRC

B1017, B1020, B1021 OCCUPANT SYSTEM CONTROL UNIT
This unit classifies occupant in passenger seat and detects electrical malfunctions in Occupant Detection Sys-
tem, and transmits malfunction information to air bag diagnosis sensor unit.
DTC DETECTION LOGIC
Display contents of
CONSULT
• Disconnection of wiring harness
B1017
OCCUPANT SENS C/U Occupant Detection System control unit • Malfunction in Occupant Detection System con-
B1020
[UNIT FAIL] is malfunctioning trol unit
B1021
• Malfunction in air bag diagnosis sensor unit

With CONSULT
2. Perform “AIR BAG” Self Diagnostic Result with CONSULT.
Without CONSULT
NOTE:
WARNING:
DIAGNOSTIC PROCEDURE
Check the connection of harness connector.
YES >> GO TO 2.
YES >> GO TO 3.
3.REPLACE OCCUPANT DETECTION SYSTEM CONTROL UNIT
1. Replace occupant detection system control unit. Refer to SR-29, "Removal and Installation".
Is DTC detected?
YES >> GO TO 4.

4.REPLACE OCCUPANT DETECTION SYSTEM SEAT SENSOR A
1. Replace passenger seat cushion frame. Refer to SE-12, "Exploded View".

B
Is DTC detected?
YES >> GO TO 5.
C
1. Replace air bag diagnosis sensor unit. Refer to SR-26, "Removal and Installation".
2. Perform DTC confirmation procedure. Refer to SRC-32, "DTC Logic". D
Is DTC detected?
YES >> GO TO 1.
NO >> INSPECTION END E
SRC

B1018 OCCUPANT SYSTEM SENSOR
Occupant Detection System sensor detects occupant in passenger seat and transmits it to Occupant Detec-
tion System control unit.
DTC DETECTION LOGIC
Display contents of
CONSULT
OCCUPANT SENS Occupant Detection System sen- • Malfunction in Occupant Detection System sensor
B1018
[UNIT FAIL] sor is malfunctioning • Malfunction in Occupant Detection System control unit

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.

4.REPLACE OCCUPANT DETECTION SYSTEM SEAT SENSOR A

B
Is DTC detected?
YES >> GO TO 5.
C
2. Perform DTC confirmation procedure. Refer to SRC-34, "DTC Logic". D
Is DTC detected?
YES >> GO TO 1.
NO >> INSPECTION END E
SRC

B1022 OCCUPANT SYSTEM CONTROL UNIT
This unit classifies occupant in passenger seat and detects electrical malfunctions in Occupant Detection Sys-
tem, and transmits malfunction information to air bag diagnosis sensor unit.
DTC DETECTION LOGIC
Display contents of
CONSULT
• Internal malfunction of Occupant Detec-
tion System control unit
• Malfunction of circuit between Occupant
OCCUPANT SENS C/U • Malfunction in Occupant Detection System con-
B1022 Detection System control unit and Air
[COMM FAIL] trol unit
bag diagnosis sensor unit
• Malfunction of Air bag diagnosis sensor
unit

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.

Is DTC detected?
YES >> GO TO 4. A
4.REPLACE OCCUPANT DETECTION SYSTEM SEAT SENSOR
B
Is DTC detected?
C
YES >> GO TO 5.
5.REPLACE AIR BAG DIAGNOSIS SENSOR UNIT D
Is DTC detected? E
YES >> GO TO 1.
F
SRC

B1023 PASSENGER AIR BAG OFF INDICATOR
Illuminates passenger air bag OFF indicator when the passenger seat is empty or occupied by a child or a
child-seat.
DTC DETECTION LOGIC
Display contents of
CONSULT
Passenger air bag OFF indicator circuit • Disconnection of wiring harness
PASS A/B INDCTR CKT
B1023 is open or shorted to ground or the cir- • Malfunction in passenger air bag OFF indicator
[UNIT FAIL]
cuits are shorted each other • Malfunction in air bag diagnosis sensor unit

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
3.CHECK PASSENGER AIR BAG OFF INDICATOR
1. Replace passenger air bag OFF indicator. Refer to IP-13, "Exploded View"
Is DTC detected?
YES >> GO TO 4.

4.REPLACE AIR BAG DIAGNOSIS SENSOR UNIT A
Is DTC detected? B
YES >> GO TO 1.
C
SRC

B1025, B1032, B1048 OCCUPANT SYSTEM SENSOR
Occupant Detection System sensor detects occupant in passenger seat and transmits it to Occupant Detec-
tion System control unit.
DTC DETECTION LOGIC
Display contents of
CONSULT
• Internal malfunction of Occupant Detec-
tion System control unit
B1025 • Malfunction of circuit between Occupant
• Malfunction in Occupant Detection System
B1032 OCS SENSOR Detection System control unit and Air
control unit
B1048 bag diagnosis sensor unit
• Malfunction of Air bag diagnosis sensor
unit

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.

Is DTC detected?
YES >> GO TO 4. A
4.REPLACE OCCUPANT DETECTION SYSTEM SEAT SENSOR
B
Is DTC detected?
C
YES >> GO TO 5.
5.REPLACE AIR BAG DIAGNOSIS SENSOR UNIT D
Is DTC detected? E
YES >> GO TO 1.
F
SRC

B1026, B1027, B1028, B1029, B1030, B1031 DIAGNOSIS SENSOR UNIT
DTC DETECTION LOGIC
Display contents of
CONSULT
B1026
B1027
B1028
CONTROL UNIT Air bag diagnosis sensor unit is malfunctioning Malfunction in air bag diagnosis sensor unit
B1029
B1030
B1031

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.

Is DTC detected?
YES >> GO TO 1. A
SRC

B1033, B1034 CRASH ZONE SENSOR
Crash zone sensor is a G sensor that outputs voltage signal during deceleration at the time of a vehicle frontal
collision that is more than the specified limit is detected.
DTC DETECTION LOGIC
Display contents of
CONSULT
B1033 CRASH ZONE SENSOR
Crash zone sensor is malfunctioning • Malfunction in crash zone sensor
B1034 [UNIT FAIL]

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
3.REPLACE CRASH ZONE SENSOR
1. Replace crash zone sensor. Refer to SR-22, "Exploded View".
Is DTC detected?
YES >> GO TO 4.
2. Perform DTC confirmation procedure. Refer to SRC-44, "DTC Logic". A
Is DTC detected?
YES >> GO TO 1.
NO >> INSPECTION END B
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
CRASH ZONE SEN- • Disconnection of wiring harness
B1035 SOR Crash zone sensor is malfunctioning • Malfunction in crash zone sensor
[COMM FAIL] • Malfunction in air bag diagnosis sensor unit

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.
Is DTC detected?
YES >> GO TO 1.
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
CRASH ZONE SEN-
Crash zone sensor is out of the speci- Diagnosis sensor unit or crash zone sensor is differ-
B1036 SOR
fied specification ent from the part specified
[UNMATCH]

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.
Is DTC detected?
YES >> GO TO 1.
SRC

B1037, B1039, B1041 CRASH ZONE SENSOR
DTC DETECTION LOGIC
Display contents of
CONSULT
B1037 • Disconnection of wiring harness
CRASH ZONE
B1039 Crash zone sensor is malfunctioning • Malfunction in crash zone sensor
SENSOR1
B1041 • Malfunction in air bag diagnosis sensor unit

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.
Is DTC detected?
YES >> GO TO 1.
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
B1042
B1043
B1044
B1045
B1046
B1047

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.

Is DTC detected?
YES >> GO TO 1. A
SRC

B1049, B1054 DRIVER AIR BAG MODULE
In case of frontal collision where acceleration is more than the specified level, the ignition materials are ignited
by electric ignition system. The system burns the gas generating materials resulting in a chemical reaction.
This generates hot gases that flow into the air bag through a filter and expand the bag.
DTC DETECTION LOGIC
Display contents of
CONSULT
• Disconnection of wiring harness and open
DRIVER AIRBAG
B1049 Driver air bag module circuit is open • Malfunction in driver air bag module
MODULE
B1054 (including the spiral cable) • Malfunction in spiral cable
[OPEN]

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
NO >> Replace harness connector.
YES >> GO TO 3.
3.CHECK SPIRAL CABLE CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect driver air bag module connector and combination switch (spiral cable) connector.
3. Check continuity between driver air bag module harness connector and combination switch (spiral cable)
harness connector.

Driver air bag module Combination switch (spiral cable) A

Continuity
Connector Terminal Connector Terminal
10 28
M350 B
11 30
M32 Existed
12 29
M351
9 30 C
4. Check continuity between driver air bag module harness connector and ground.
Driver side air bag module D

Continuity
Connector Terminal
10
M350 Ground E
11
Not existed
12
M351
9
F
YES >> GO TO 4.
NO >> Replace combination switch (spiral cable). Refer to SR-11, "Exploded View". G
2. Perform DTC confirmation procedure. Refer to SRC-54, "DTC Logic". SRC
Is DTC detected?
YES >> GO TO 5.
I
5.REPLACE DRIVER AIR BAG MODULE
1. Replace driver air bag module. Refer to SR-11, "Exploded View" J
Is DTC detected?
YES >> GO TO 1. K

DTC DETECTION LOGIC
Display contents of
CONSULT
• Disconnection of wiring harness and short
DRIVER AIRBAG Driver air bag module circuit is shorted to
B1050 • Malfunction in driver air bag module
MODULE power supply circuit
B1055 • Malfunction in spiral cable
[VB-SHORT] (including the spiral cable)

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
harness connector.


Continuity
10 28
M350 B
11 30
M32 Existed
12 29
M351
9 30 C

Continuity
Connector Terminal
10
M350 Ground E
11
Not existed
12
M351
9
F
YES >> GO TO 4.
Is DTC detected?
YES >> GO TO 5.
I
Is DTC detected?
YES >> GO TO 1. K

DTC DETECTION LOGIC
Display contents of
CONSULT
DRIVER AIRBAG
B1051 Driver air bag module circuit is shorted to ground • Malfunction in driver air bag module
MODULE
B1056 (including the spiral cable) • Malfunction in spiral cable
[GND-SHORT]

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
harness connector.


Continuity
10 28
M350 B
11 30
M32 Existed
12 29
M351
9 30 C

Continuity
Connector Terminal
10
M350 Ground E
11
Not existed
12
M351
9
F
YES >> GO TO 4.
Is DTC detected?
YES >> GO TO 5.
I
Is DTC detected?
YES >> GO TO 1. K

DTC DETECTION LOGIC
Display contents of
CONSULT
DRIVER AIRBAG Driver air bag module circuit are shorted to each
MODULE other
[SHORT] (including the spiral cable)

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
harness connector.


Continuity
10 28
M350 B
11 30
M32 Existed
12 29
M351
9 30 C

Continuity
Connector Terminal
10
M350 Ground E
11
Not existed
12
M351
9
F
YES >> GO TO 4.
Is DTC detected?
YES >> GO TO 5.
I
Is DTC detected?
YES >> GO TO 1. K

DTC DETECTION LOGIC
Display contents of
CONSULT
B1058
B1059
B1060
B1061
B1062
B1063

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.

Is DTC detected?
YES >> GO TO 1. A
SRC

B1065, B1070 PASSENGER AIR BAG MODULE
DTC DETECTION LOGIC
Display contents of
CONSULT
B1065 ASSIST A/B MODULE
Passenger air bag module circuit is open • Malfunction in passenger air bag module
B1070 [OPEN]

With CONSULT
Without CONSULT
NOTE:
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3
minutes or more. (To discharge backup capacitor.)
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.

4.REPLACE PASSENGER AIR BAG MODULE A
1. Replace passenger air bag module. Refer to SR-17, "Exploded View"
Is DTC detected? B
YES >> GO TO 1.
C
SRC

DTC DETECTION LOGIC
Display contents of CON-

SULT
B1066 ASSIST A/B MODULE Passenger air bag module circuit is
• Malfunction in passenger air bag module
B1071 [VB-SHORT] shorted to power supply circuit

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.

1. Replace passenger air bag module. Refer to SR-17, "Exploded View".
Is DTC detected? B
YES >> GO TO 1.
C
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
B1067 ASSIST A/B MODULE Passenger air bag module circuit is
B1072 [GND-SHORT] shorted to ground

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.

Is DTC detected? B
YES >> GO TO 1.
C
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
B1068 ASSIST A/B MODULE Passenger air bag module circuits are
B1073 [SHORT] shorted to each other

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.

Is DTC detected? B
YES >> GO TO 1.
C
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
B1074
B1075
B1076
B1077
B1078
B1079

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.

Is DTC detected?
YES >> GO TO 1. A
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
DRIVER AIRBAG Driver air bag module circuit are shorted to each
MODULE other
[SHORT] (including the spiral cable)

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
harness connector.


Continuity
10 28
M350 B
11 30
M32 Existed
12 29
M351
9 30 C

Continuity
Connector Terminal
10
M350 Ground E
11
Not existed
12
M351
9
F
YES >> GO TO 4.
NO >> Replace combination switch (spiral cable). Refer to MWI-93, "Exploded View". G
Is DTC detected?
YES >> GO TO 5.
I
Is DTC detected?
YES >> GO TO 1. K

B1081 SEAT BELT PRE-TENSIONER RH
In the case of a frontal collision that is more than the specified impact level, the air bag diagnosis sensor unit
detects the deceleration caused by collision. It restrains the passenger with seat belt easing the stress on pas-
sengers chest with load limiter.
DTC DETECTION LOGIC
Display contents of
CONSULT
PRE-TEN FRONT RH
B1081 Seat belt pre-tensioner RH circuit is open • Malfunction in seat belt pre-tensioner RH
[OPEN]

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
3.REPLACE SEAT BELT PRE-TENSIONER
1. Replace seat belt pre-tensioner RH. Refer to SB-6, "SEAT BELT RETRACTOR : Exploded View".
Is DTC detected?
YES >> GO TO 4.

Is DTC detected? B
YES >> GO TO 1.
C
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
PRE-TEN FRONT RH Seat belt pre-tensioner RH circuit is
B1082 • Malfunction in seat belt pre-tensioner RH
[VB-SHORT] shorted to power supply circuit

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.

Is DTC detected? B
YES >> GO TO 1.
C
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
PRE-TEN FRONT RH Seat belt pre-tensioner RH circuit is
[GND-SHORT] shorted to ground

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.

Is DTC detected? B
YES >> GO TO 1.
C
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
PRE-TEN FRONT RH Seat belt pre-tensioner RH circuits are
[SHORT] shorted to each other

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.

Is DTC detected? B
YES >> GO TO 1.
C
SRC

B1086 SEAT BELT PRE-TENSIONER LH
DTC DETECTION LOGIC
Display contents of
CONSULT
PRE-TEN FRONT LH
B1086 Seat belt pre-tensioner LH circuit is open • Malfunction in seat belt pre-tensioner LH
[OPEN]

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
1. Replace seat belt pre-tensioner LH. Refer to SB-6, "SEAT BELT RETRACTOR : Exploded View".
Is DTC detected?
YES >> GO TO 4.

Is DTC detected? B
YES >> GO TO 1.
C
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
PRE-TEN FRONT LH Seat belt pre-tensioner LH circuit is
B1087 • Malfunction in seat belt pre-tensioner LH

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.

Is DTC detected? B
YES >> GO TO 1.
C
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
PRE-TEN FRONT LH Seat belt pre-tensioner LH circuit is
[GND-SHORT] shorted to ground

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.

Is DTC detected? B
YES >> GO TO 1.
C
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
PRE-TEN FRONT LH Seat belt pre-tensioner LH circuits are
[SHORT] shorted to each other

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.

Is DTC detected? B
YES >> GO TO 1.
C
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
B1090
B1091
B1092
B1093
B0194
B1095

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.

Is DTC detected?
YES >> GO TO 1. A
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
B1106
B1107
B1108
B1109
B1110
B1111

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.

Is DTC detected?
YES >> GO TO 1. A
SRC

B1113, B1114 SATELLITE SENSOR RH
When air bag diagnosis sensor unit defines both signal voltage of the “G” sensor and the safing algorithm to
be that of collision which is more than the specified level, the driving circuit switches on and feeds the electric
ignitor of both the front side air bag and side curtain air bag.
DTC DETECTION LOGIC
Display contents of
CONSULT
B1113 SATELLITE SENS RH
Satellite sensor RH is malfunctioning • Malfunction in satellite sensor RH
B1114 [UNIT FAIL]

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
3.REPLACE SATELLITE SENSOR
1. Replace satellite sensor RH. Refer to SR-24, "Exploded View".
Is DTC detected?
YES >> GO TO 4.

Is DTC detected? B
YES >> GO TO 1.
C
SRC

B1115 SATELLITE SENSOR RH
DTC DETECTION LOGIC
Display contents of
CONSULT
SATELLITE SENS RH
B1115 Satellite sensor RH is malfunctioning • Malfunction in satellite sensor RH
[COMM FAIL]

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.

Is DTC detected? B
YES >> GO TO 1.
C
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
SATELLITE SENS RH Satellite sensor RH is out of the specified Diagnosis sensor unit or crash zone sensor is dif-
B1116
[UNMATCH] specification ferent from the part specified

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.
Is DTC detected?
YES >> GO TO 1.
SRC

B1118, B1119 SATELLITE SENSOR LH
DTC DETECTION LOGIC
Display contents of
CONSULT
B1118 SATELLITE SENS LH
Satellite sensor LH is malfunctioning • Malfunction in satellite sensor LH
B1119 [UNIT FAIL]

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
1. Replace satellite sensor LH. Refer to SR-24, "Exploded View".
Is DTC detected?
YES >> GO TO 4.

Is DTC detected? B
YES >> GO TO 1.
C
SRC

B1120 SATELLITE SENSOR LH
DTC DETECTION LOGIC
Display contents of
CONSULT
SATELLITE SENS LH
B1120 Satellite sensor LH is malfunctioning • Malfunction in satellite sensor LH
[COMM FAIL]

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.

Is DTC detected? B
YES >> GO TO 1.
C
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
SATELLITE SENS LH Satellite sensor LH is out of the specified Diagnosis sensor unit or crash zone sensor is dif-
B1121
[UNMATCH] specification ferent from the part specified

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.
Is DTC detected?
YES >> GO TO 1.
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
B1122
B1123
B1124
B1125
B1126
B1127

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.

Is DTC detected?
YES >> GO TO 1. A
SRC

B1129 SIDE AIR BAG MODULE RH
DTC DETECTION LOGIC
Display contents of
CONSULT
SIDE MODULE RH
B1129 Side air bag module RH circuit is open • Malfunction in side air bag module RH
[OPEN]

With CONSULT
Without CONSULT
2. Check the air bag warning lamp status.SRC-18, "Diagnosis with Air Bag Warning Lamp"
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.

4.REPLACE SIDE AIR BAG MODULE A
1. Replace side air bag module RH. Refer to SE-12, "Exploded View".
Is DTC detected? B
YES >> GO TO 1.
C
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
SIDE MODULE RH Side air bag module RH circuit is shorted
B1130 • Malfunction in side air bag module RH
[VB-SHORT] to power supply circuit

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.

Is DTC detected? B
YES >> GO TO 1.
C
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
SIDE MODULE RH Side air bag module RH circuit is shorted
[GND-SHORT] to ground

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.

Is DTC detected? B
YES >> GO TO 1.
C
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
SIDE MODULE RH Side air bag module RH circuits are short-
[SHORT] ed to each other

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.

Is DTC detected? B
YES >> GO TO 1.
C
SRC

B1134 SIDE AIR BAG MODULE LH
DTC DETECTION LOGIC

SULT
SIDE MODULE LH
B1134 Side air bag module LH circuit is open • Malfunction in side air bag module LH
[OPEN]

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.

1. Replace side air bag module LH. Refer to SE-12, "Exploded View".
Is DTC detected? B
YES >> GO TO 1.
C
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
SIDE MODULE LH Side air bag module LH circuit is shorted to
B1135 • Malfunction in side air bag module LH
[VB-SHORT] power supply circuit

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.

Is DTC detected? B
YES >> GO TO 1.
C
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
SIDE MODULE LH Side air bag module LH circuit is shorted to
[GND-SHORT] ground

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.

Is DTC detected? B
YES >> GO TO 1.
C
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
SIDE MODULE LH Side air bag module LH circuits are shorted
[SHORT] to each other

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.

Is DTC detected? B
YES >> GO TO 1.
C
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
B1138
B1139
B1140
B1141
B1142
B1143

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.

Is DTC detected?
YES >> GO TO 1. A
SRC

B1144 DIAGNOSIS SENSOR UNIT
DTC DETECTION LOGIC

SULT
Air bag diagnosis sensor unit is malfunctioning
B1144 Diagnosis sensor unit • Configuration in air bag diagnosis sensor unit
or out of the specification
does not match the vehicles specification

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 1.

B1145 CURTAIN AIR BAG MODULE RH
A
In case of frontal collision where acceleration is more than the specified level, the ignition materials are ignited B
DTC Logic INFOID:0000000009946254 C
DTC DETECTION LOGIC

D
Display contents of
CONSULT
• Disconnection of wiring harness and open E
CURTAIN MODULE RH
B1145 Curtain air bag module RH circuit is open • Malfunction in side curtain air bag module RH
[OPEN]
DTC CONFIRMATION PROCEDURE F

With CONSULT G
Without CONSULT
SRC
NOTE:
SRS does not enter the diagnosis mode if no malfunction is detected in the user mode. I
NO >> INSPECTION END J
K
WARNING:
• Never use unspecified tester or other measuring device. L
Check the harness connector. M
YES >> GO TO 2.
NO >> Replace harness connector. N
O
YES >> GO TO 3.
P
Is DTC detected?
YES >> GO TO 4.

4.REPLACE CURTAIN AIR BAG MODULE
1. Replace curtain air bag module RH. Refer to SR-20, "Exploded View"
Is DTC detected?
YES >> GO TO 1.

A
DTC DETECTION LOGIC

D
Display contents of
CONSULT
• Disconnection of wiring harness and short E
CURTAIN MODULE RH Curtain air bag module RH circuit is
B1146 • Malfunction in curtain air bag module RH

With CONSULT G
Without CONSULT
SRC
NOTE:
K
WARNING:
YES >> GO TO 2.
O
YES >> GO TO 3.
P
Is DTC detected?
YES >> GO TO 4.

Is DTC detected?
YES >> GO TO 1.

A
DTC DETECTION LOGIC

D
Display contents of
CONSULT
CURTAIN MODULE • Disconnection of wiring harness and short E
Curtain air bag module RH circuit is shorted
B1147 RH • Malfunction in curtain air bag module RH
to ground
[GND-SHORT] • Malfunction in air bag diagnosis sensor unit

With CONSULT G
Without CONSULT
1. Turn ignition switch ON. SRC
NOTE:
WARNING: K
M
YES >> GO TO 2.
N
Is the inspection result normal? O
YES >> GO TO 3.
P
Is DTC detected?
YES >> GO TO 4.

Is DTC detected?
YES >> GO TO 1.

A
DTC DETECTION LOGIC

D
Display contents of
CONSULT
CURTAIN MODULE RH Curtain air bag module RH circuits are shorted
B1148 • Malfunction in curtain air bag module RH
[SHORT] to each other

With CONSULT G
Without CONSULT
NOTE:
WARNING: K
M
YES >> GO TO 2.
N
YES >> GO TO 3.
P
Is DTC detected?
YES >> GO TO 4.

Is DTC detected?
YES >> GO TO 1.

B1150 CURTAIN AIR BAG MODULE LH
A
DTC DETECTION LOGIC

D
Display contents of
CONSULT
• Disconnection of wiring harness and open E
CURTAIN MODULE LH
B1150 Curtain air bag module LH circuit is open • Malfunction in curtain air bag module LH
[OPEN]

With CONSULT G
Without CONSULT
SRC
NOTE:
K
WARNING:
YES >> GO TO 2.
O
YES >> GO TO 3.
P
Is DTC detected?
YES >> GO TO 4.

1. Replace curtain air bag module LH. Refer to SR-20, "Exploded View"
Is DTC detected?
YES >> GO TO 1.

A
DTC DETECTION LOGIC

D
Display contents of
CONSULT
CURTAIN MODULE LH Curtain air bag module LH circuit is shorted
B1151 • Malfunction in curtain air bag module LH
[VB-SHORT] to power supply circuit

With CONSULT G
Without CONSULT
NOTE:
WARNING: K
M
YES >> GO TO 2.
N
YES >> GO TO 3.
P
Is DTC detected?
YES >> GO TO 4.

Is DTC detected?
YES >> GO TO 1.

A
DTC DETECTION LOGIC

D
Display contents of
CONSULT
CURTAIN MODULE LH Curtain air bag module LH circuit is shorted
B1152 • Malfunction in curtain air bag module LH
[GND-SHORT] to ground

With CONSULT G
Without CONSULT
SRC
NOTE:
K
WARNING:
YES >> GO TO 2.
O
YES >> GO TO 3.
P
Is DTC detected?
YES >> GO TO 4.

Is DTC detected?
YES >> GO TO 1.

A
DTC DETECTION LOGIC

D
Display contents of
CONSULT
CURTAIN MODULE • Disconnection of wiring harness and short E
Curtain air bag module LH circuits are shorted
B1153 LH • Malfunction in curtain air bag module LH
to each other
[SHORT] • Malfunction in air bag diagnosis sensor unit

With CONSULT G
Without CONSULT
SRC
NOTE:
K
WARNING:
YES >> GO TO 2.
O
YES >> GO TO 3.
P
Is DTC detected?
YES >> GO TO 4.

Is DTC detected?
YES >> GO TO 1.

A
• It detects a shock that is more than the specified level and monitors whether the driver and passenger air B
C
DTC DETECTION LOGIC D
Display contents of
CONSULT
E
B1154
B1155
B1156
B1157 F
B1158
B1159
DTC CONFIRMATION PROCEDURE G

With CONSULT SRC
Without CONSULT I
NOTE:
SRS does not enter the diagnosis mode if no malfunction is detected in the user mode. J
NO >> INSPECTION END K
L
WARNING:
• Never use unspecified tester or other measuring device. M
Check the harness connector. N
YES >> GO TO 2.
NO >> Replace harness connectors. O
P
YES >> GO TO 3.

Is DTC detected?
YES >> GO TO 1.

A
C
Display contents of
CONSULT
E
B1170
B1171
B1172
B1173 F
B1174
B1175

With CONSULT SRC
Without CONSULT I
NOTE:
L
WARNING:

YES >> GO TO 2.
P
YES >> GO TO 3.

Is DTC detected?
YES >> GO TO 1.

A
C
Display contents of
CONSULT
E
B1186
B1187
B1188
B1189 F
B1190
B1191

With CONSULT SRC
Without CONSULT I
NOTE:
L
WARNING:
YES >> GO TO 2.
P
YES >> GO TO 3.

Is DTC detected?
YES >> GO TO 1.

A
C
Display contents of
CONSULT
E
B1202
B1203
B1204
B1205 F
B1206
B1207

With CONSULT SRC
Without CONSULT I
NOTE:
L
WARNING:

YES >> GO TO 2.
P
YES >> GO TO 3.

Is DTC detected?
YES >> GO TO 1.

B1209 FRONTAL COLLISION DETECTION
B1209 FRONTAL COLLISION DETECTION
A
The air bags and seat belt pre-tensioners for driver and passenger are activated by the air bag diagnosis sen- B
sor unit signal transmitted at the time of the frontal collision.
C
DTC DETECTION LOGIC
DTC
DTC detecting condition Possible cause
D
SULT
FRONTAL COLLISION Seat belt pre-tensioner, driver side air bag and pas-
B1209 —
DETECTION senger air bag are deployed E
1.CHECK SELF-DIAG RESULT F
With CONSULT
2. Perform “AIR BAG” Self Diagnostic Result. G
Without CONSULT
2. Check the air bag warning lamp status. Refer to SRC-18, "Diagnosis with Air Bag Warning Lamp". SRC
NOTE:
I
Diagnosis Procedure INFOID:0000000009946291 J
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3 K
1.PERFORM COLLISION DIAGNOSIS L
Perform collision diagnosis.Refer to SR-5, "FOR FRONTAL COLLISION : When SRS is activated in a colli-
sion" or SR-6, "FOR FRONTAL COLLISION : When SRS is not activated in a collision".
Is collision diagnosis complete? M
YES >> GO TO 2.
2.FINAL INSPECTION N
Perform “AIR BAG” Self Diagnostic Result.

NO >> Perform diagnosis of applicable DTC.Refer to SRC-163, "DTC Index".
P

B1210 SIDE COLLISION DETECTION
B1210 SIDE COLLISION DETECTION
The side air bag and curtain air bag are activated by the air bag diagnosis sensor unit signal transmitted at the
time of side collision.
DTC DETECTION LOGIC

SULT
SIDE COLLISION DE-
B1210 Side air bag and curtain air bag are deployed —
TECTION

With CONSULT
Without CONSULT
NOTE:
WARNING:
1.PERFORM COLLISION DIAGNOSIS
Perform collision diagnosis.Refer to SR-7, "FOR SIDE AND ROLLOVER COLLISION : When SRS is activated
in a collision" or SR-8, "FOR SIDE AND ROLLOVER COLLISION : When SRS is not activated in a collision".
Is collision diagnosis complete?
YES >> GO TO 2.
2.FINAL INSPECTION

B1211 ROLLOVER DETECTION
A
The seat belt pre-tensioner and curtain air bag are activated by the air bag diagnosis sensor unit signal at the B
time of rollover.
C
DTC DETECTION LOGIC
DTC
Display contents of
DTC detecting condition Possible cause
D
CONSULT
ROLLOVER DETEC- Seat belt pre-tensioner and curtain air bag module
B1211 —
TION are deployed because of rollover detection E
1.CHECK SELF-DIAG RESULT F
With CONSULT
2. Perform “AIR BAG” Self Diagnostic Result. G
Without CONSULT
2. Check the air bag warning lamp status. Refer to SRC-18, "Diagnosis with Air Bag Warning Lamp". SRC
NOTE:
I
Diagnosis Procedure INFOID:0000000009946297 J
WARNING:
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3 K
1.PERFORM COLLISION DIAGNOSIS L
Perform collision diagnosis.Refer to SR-7, "FOR SIDE AND ROLLOVER COLLISION : When SRS is activated
in a collision" or SR-8, "FOR SIDE AND ROLLOVER COLLISION : When SRS is not activated in a collision".
Is collision diagnosis complete? M
YES >> GO TO 2.
2.FINAL INSPECTION N

P

B1212, B1213, B1214 SATELLITE SENSOR RH
Satellite sensor is a G sensor that outputs voltage signal during deceleration at the time of a vehicle side colli-
sion that is more than the specified limit is detected.
DTC DETECTION LOGIC
Display contents of
CONSULT
B1213 RH1 SAT-SENS Satellite sensor RH is malfunctioning • Malfunction in satellite sensor RH

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.
Is DTC detected?
YES >> GO TO 1.
SRC

B1215, B1216, B1217 SATELLITE SENSOR LH
Satellite sensor is a G sensor that outputs voltage signal during deceleration at the time of a vehicle side colli-
sion that is more than the specified limit is detected.
DTC DETECTION LOGIC
Display contents of
CONSULT
B1216 LH1 SAT-SENS Satellite sensor LH is malfunctioning • Malfunction in satellite sensor LH

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 4.
Is DTC detected?
YES >> GO TO 1.
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT
B1218
B1219
B1220
B1221
B1222
B1223

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.

Is DTC detected?
YES >> GO TO 1. A
SRC

DTC DETECTION LOGIC
Display contents of
CONSULT

With CONSULT
Without CONSULT
NOTE:
WARNING:
YES >> GO TO 2.
YES >> GO TO 3.
Is DTC detected?
YES >> GO TO 1.

DIAGNOSIS SENSOR UNIT
< ECU DIAGNOSIS INFORMATION >
ECU DIAGNOSIS INFORMATION A
DTC Index INFOID:0000000009946310
B
DTC Diagnostic item Explanation Reference page

C
SRC-24, "CON-
Low battery voltage (Less than 9 V)
SULT Function".
SRC-18, "Diag-
When malfunction is
nosis with Air
D
indicated by the “AIR
Self-diagnostic result is not erased Bag Warning
BAG” warning lamp in
— NO DTC IS DETECTED. after repair Lamp", SRC-24,
the user mode
"CONSULT E
Function".
Intermittent malfunction is detected in GI-40, "Intermit-
the past tent Incident"
F
No malfunction is detected —
• SRC-26,
"DTC Logic".
• SRC-28,
G
B1001-B1015 CONTROL UNIT Air bag diagnosis sensor unit is malfunctioning
"DTC Logic".
• SRC-30,
"DTC Logic". SRC
B1017
OCCUPANT SENS C/U SRC-32, "DTC
B1020 Malfunction occurs in Occupant Detection System control unit
[UNIT FAIL] Logic".
B1021
I
OCCUPANT SENS SRC-34, "DTC
B1018 Malfunction occurs in Occupant Detection System sensor
[UNIT FAIL] Logic".
Malfunction occurs in Occupant Detection System control unit,
OCCUPANT SENS C/U SRC-36, "DTC J
B1022 circuit of Occupant Detection System control unit air bag diag-
[COMM FAIL] Logic".
nosis sensor unit, or air bag diagnosis sensor unit
Passenger air bag OFF indicator circuit is open or shorted to SRC-38, "DTC
B1023 PASS A/B INDCTR CKT K
ground or the circuits are shorted each other Logic".
B1025 Malfunction occurs in Occupant Detection System control unit,
SRC-40, "DTC
B1032 OCS SENSOR circuit of Occupant Detection System control unit air bag diag-
Logic".
B1048 nosis sensor unit, or air bag diagnosis sensor unit L
Air bag diagnosis sensor unit is malfunctioning or out of the SRC-42, "DTC
B1026-B1031 CONTROL UNIT
specified specification Logic".
B1033 CRASH ZONE SEN SRC-44, "DTC M
Crash zone sensor is malfunctioning
B1034 [UNIT FAIL] Logic".
CRASH ZONE SEN SRC-46, "DTC
B1035 Crash zone sensor is malfunctioning
[COMM FAIL] Logic". N
CRASH ZONE SEN SRC-48, "DTC
B1036 Crash zone sensor is out of the specified specification
[UNMATCH] Logic".
B1037
SRC-50, "DTC
O
B1039 CRASH ZONE SEN1 Crash zone sensor is malfunctioning
Logic".
B1041
SRC-52, "DTC P
Logic".
B1049 DRIVER AIRBAG MODULE SRC-54, "DTC
Driver air bag module circuit is open (including the spiral cable)
B1054 [OPEN] Logic".
B1050 DRIVER AIRBAG MODULE Driver air bag module circuit is shorted to power supply circuit SRC-56, "DTC
B1055 [VB-SHORT] (including the spiral cable) Logic".
B1051 DRIVER AIRBAG MODULE Driver air bag module circuit is shorted to ground (including the SRC-58, "DTC
B1056 [GND-SHORT] spiral cable) Logic".

B1052 DRIVER AIRBAG MODULE Driver air bag module circuits are shorted to each other (includ- SRC-60, "DTC
B1057 [SHORT] ing spiral cable) Logic".
SRC-62, "DTC
Logic".
B1065 ASSIST A/B MODULE SRC-64, "DTC
Passenger air bag module circuit is open
B1070 [OPEN] Logic".
B1066 ASSIST A/B MODULE Passenger air bag module circuit is shorted to power supply SRC-66, "DTC
B1071 [VB-SHORT] circuit Logic".
Passenger air bag module circuit is shorted to ground
B1072 [GND-SHORT] Logic".
Passenger air bag module circuits are shorted to each other
B1073 [SHORT] Logic".
SRC-72, "DTC
Logic".
B1080 DRIVER AIRBAG MODULE Driver air bag module circuits are shorted to each other (includ- SRC-74, "DTC
B1096 [SHORT] ing spiral cable) Logic".
PRE-TEN FRONT RH SRC-76, "DTC
B1081 Seat belt pre-tensioner RH circuit is open
[OPEN] Logic".
PRE-TEN FRONT RH Seat belt pre-tensioner RH circuit is shorted to power supply SRC-78, "DTC
B1082
[VB-SHORT] circuit Logic".
B1083 Seat belt pre-tensioner RH circuit is shorted to ground
[GND-SHORT] Logic".
B1084 Seat belt pre-tensioner RH circuits are shorted to each other
[SHORT] Logic".
PRE-TEN FRONT LH SRC-84, "DTC
B1086 Seat belt pre-tensioner LH circuit is open
[OPEN] Logic".
PRE-TEN FRONT LH Seat belt pre-tensioner LH circuit is shorted to power supply SRC-86, "DTC
B1087
[VB-SHORT] circuit Logic".
B1088 Seat belt pre-tensioner LH circuit is shorted to ground
[GND-SHORT] Logic".
B1089 Seat belt pre-tensioner LH circuits are shorted to each other
[SHORT] Logic".
SRC-92, "DTC
Logic".
SRC-94, "DTC
Logic".
B1113 SATELLITE SENS RH SRC-96, "DTC
Satellite sensor RH is malfunctioning
SATELLITE SENS RH SRC-98, "DTC
B1115 Satellite sensor RH is malfunctioning
[COMM FAIL] Logic".
SATELLITE SENS RH SRC-100, "DTC
B1116 Satellite sensor RH is out of the specified specification
[UNMATCH] Logic".
B1118 SATELLITE SENS LH SRC-102, "DTC
Satellite sensor LH is malfunctioning
SATELLITE SENS LH SRC-104, "DTC
B1120 Satellite sensor LH is malfunctioning
[COMM FAIL] Logic".
SATELLITE SENS LH SRC-106, "DTC
B1121 Satellite sensor LH is out of the specified specification
[UNMATCH] Logic".
SRC-108, "DTC
Logic".
SIDE MODULE RH SRC-110, "DTC
B1129 Side air bag module RH circuit is open
[OPEN] Logic".

A
SIDE MODULE RH Side air bag module RH circuit is shorted to power supply cir- SRC-112, "DTC
B1130
[VB-SHORT] cuit Logic".
B1131 Side air bag module RH circuit is shorted to ground B
[GND-SHORT] Logic".
B1132 Seat belt pre-tensioner RH circuits are shorted to each other
[SHORT] Logic".
SIDE MODULE LH SRC-118, "DTC C
B1134 Side air bag module LH circuit is open
[OPEN] Logic".
SIDE MODULE LH Side air bag module LH circuit is shorted to power supply cir- SRC-120, "DTC
B1135
[VB-SHORT] cuit Logic". D
SIDE MODULE LH SRC-122, "DTC
B1136 Side air bag module LH circuit is shorted to ground
[GND-SHORT] Logic".
SIDE MODULE LH SRC-124, "DTC E
B1137 Side air bag module LH circuits are shorted to each other
[SHORT] Logic".
SRC-126, "DTC
Logic" F
Air bag diagnosis sensor unit is malfunctioning or out of the SRC-128, "DTC
B1144 CONTROL UNIT
specified specification Logic".
CURTAIN MODULE RH SRC-129, "DTC G
B1145 Curtain air bag module RH circuit is open
[OPEN] Logic".
CURTAIN MODULE RH Curtain air bag module RH circuit is shorted to power supply SRC-131, "DTC
B1146
[VB-SHORT] circuit Logic". SRC
CURTAIN MODULE RH SRC-133, "DTC
B1147 Curtain air bag module RH circuit is shorted to ground
[GND-SHORT] Logic".
B1148
CURTAIN MODULE RH
Curtain air bag module RH circuits are shorted to each other
SRC-135, "DTC I
[SHORT] Logic".
CURTAIN MODULE LH SRC-137, "DTC
B1150 Curtain air bag module LH circuit is open
[OPEN] Logic". J
CURTAIN MODULE LH Curtain air bag module LH circuit is shorted to power supply SRC-139, "DTC
B1151
[VB-SHORT] circuits Logic".
CURTAIN MODULE LH SRC-141, "DTC K
B1152 Curtain air bag module LH circuit is shorted to ground
[GND-SHORT] Logic".
CURTAIN MODULE LH SRC-143, "DTC
B1153 Curtain air bag module LH circuits are shorted to each other
[SHORT] Logic".
L
SRC-145, "DTC
Logic".
SRC-147, "DTC M
Logic".
SRC-149, "DTC
Logic".
N
SRC-151, "DTC
Logic".
FRONTAL COLLISION DE- Seat belt pre-tensioner, driver side air bag and passenger air SRC-153, "DTC
B1209 O
TECTION bag are deployed Logic".
SIDE COLLISION DETEC- SRC-154, "DTC
B1210 Side air bag and curtain air bag are deployed
TION Logic".
P
Seat belt pre-tensioner side curtain air bag module are de- SRC-155, "DTC
ployed because of rollover detection Logic".
SRC-156, "DTC
B1212-B1214 RH1 SAT-SENS Satellite sensor RH is malfunctioning
Logic".
SRC-158, "DTC
B1215-B1217 LH1 SAT-SENS Satellite sensor LH is malfunctioning
Logic".

SRC-160, "DTC
Logic".
SRC-162, "DTC
B1239 CONTROL UNIT Air bag diagnosis sensor unit is malfunctioning
Logic".
Wiring Diagram - SRS AIR BAG CONTROL SYSTEM - INFOID:0000000009946311
JRHWC0143GB

SRC
JRHWC0144GB

JRHWC1437GB

SRC
JRHWC1438GB

JRHWC1439GB

SRC
JRHWC1440GB

SRS AIR BAG WARNING LAMP DOES NOT TURN OFF
< SYMPTOM DIAGNOSIS >
SYMPTOM DIAGNOSIS
SRS AIR BAG WARNING LAMP DOES NOT TURN OFF
1.CHECK AIR BAG MODULE AND SEAT BELT PRE-TENSIONER

Check the deployment of air bag module and seat belt pre-tensioner.
Is air bag module deployed?
YES >> Replace the malfunctioning parts.
NO >> GO TO 2.
2.CHECK AIR BAG FUSE
Check 10A fuse [No.2, located in fuse block (J/B)].
YES >> GO TO 3.
NO >> Replace the fuse.
YES >> GO TO 4.
YES >> GO TO 5.
2. Check air bag warning lamp operation.
NO >> GO TO 6.
6.REPLACE COMBINATION METER
1. Replace combination meter. Refer to MWI-93, "Exploded View".
2. Check air bag warning lamp operation.
NO >> GO TO 1.

SRS AIR BAG WARNING LAMP DOES NOT TURN ON
< SYMPTOM DIAGNOSIS >
SRS AIR BAG WARNING LAMP DOES NOT TURN ON
A
1.CHECK COMBINATION METER POWER SPPLY AND GROUND CIRCUIT B

Check combination meter unit power supply and ground circuit. Refer to MWI-39, "COMBINATION METER :
Diagnosis Procedure".
Is the inspection result normal? C
YES >> GO TO 2.
NO >> Repair or replace the malfunctioning parts.
2.CHECK HARNESS CONNECTOR D

Is the inspection result normal? E
YES >> GO TO 3.
3.CHECK WIRING HARNESS F
G
YES >> GO TO 4.
4.CHECK AIR BAG DIAGNOSIS SENSOR UNIT SRC
Disconnect air bag diagnosis sensor unit connector and turn ignition switch ON.
Does air bag warning lamp turn ON?
YES >> Replace air bag diagnosis sensor unit. Refer to SR-26, "Exploded View". I
NO >> Replace combination meter. Refer to MWI-93, "Exploded View".

PRECAUTIONS
< PRECAUTION >
PRECAUTION
PRECAUTIONS
Precautions for Removing of Battery Terminal INFOID:0000000010166639
• When removing the 12V battery terminal, turn OFF the ignition
switch and wait at least 30 seconds.
NOTE:
ECU may be active for several tens of seconds after the ignition
switch is turned OFF. If the battery terminal is removed before ECU
stops, then a DTC detection error or ECU data corruption may
occur.
• For vehicles with the 2-batteries, be sure to connect the main bat-
tery and the sub battery before turning ON the ignition switch.
NOTE:
If the ignition switch is turned ON with any one of the terminals of
SEF289H
main battery and sub battery disconnected, then DTC may be
detected.
• After installing the 12V battery, always check "Self Diagnosis Result" of all ECUs and erase DTC.
NOTE:
The removal of 12V battery may cause a DTC detection error.
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER" INFOID:0000000010166642
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the “SRS AIR BAG” and “SEAT BELT” of this
Service Manual.
WARNING:
Always observe the following items for preventing accidental activation.
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision that would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see “SRS AIR BAG”.
• Never use electrical test equipment on any circuit related to the SRS unless instructed to in this Ser-
vice Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness
connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
Always observe the following items for preventing accidental activation.
• When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the
ignition ON or engine running, never use air or electric power tools or strike near the sensor(s) with
a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the
battery, and wait at least 3 minutes before performing any service.
Service INFOID:0000000009946315
• Never use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
• Before servicing the SRS, turn ignition switch OFF, disconnect battery negative terminal and wait 3 minutes
or more.

PRECAUTIONS
< PRECAUTION >
For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-
tensioner to deploy. Therefore, never work on any SRS connectors or wires until at least 3 minutes have A
passed.
• Diagnosis sensor unit must always be installed with their arrow marks “⇐” pointing towards the front of the
vehicle for proper operation. Also check diagnosis sensor unit for cracks, deformities or rust before installa-
B
tion and replace as required.
• The spiral cable must be aligned with the neutral position since its rotations are limited. Never turn steering
wheel and column after removal of steering gear.
• Handle air bag module carefully. Always place driver and front passenger air bag modules with the pad side C
facing upward and seat mounted front side air bag module standing with the stud bolt side facing down.
• Conduct self-diagnosis to check entire SRS for proper function after replacing any components.
• After air bag inflates, the front instrument panel assembly should be replaced if damaged. D
• Always replace instrument panel pad following front passenger air bag deployment.
• Never solder the harness when making repairs. Check that harness is not pinched and that there is no con-
tact with other components.
• Never allow harness to come in contact with oil, grease, waste oil, or water. E
• Never insert foreign materials, such as a screwdriver, into the harness connector. (This is to prevent acci-
dental activation caused by static electricity.)
• Always use CONSULT or SRS air bag warning lamp to perform the circuit diagnosis. (Never use an electric F
tester such as a circuit tester.)
Occupant Detection System Precaution INFOID:0000000009946316
G
Replace Occupant Detection System control unit and passenger front seat cushion frame as an assembly.
Refer to SE-12, "Exploded View".
SRC

Srs Airbag Control System: Section

Uploaded by

Copyright:

Available Formats

Srs Airbag Control System: Section

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Srs Airbag Control System: Section

Uploaded by

Copyright:

Available Formats

RESTRAINTS

SRS AIRBAG CONTROL SYSTEM

OCCUPANT DETECTION SYSTEM ..................15 B1018 OCCUPANT SYSTEM SENSOR ........... 34

Revision: 2013 October SRC-1 2014 CUBE

Revision: 2013 October SRC-2 2014 CUBE

Revision: 2013 October SRC-3 2014 CUBE

B1202, B1203, B1204, B1205, B1206, B1207 PRECAUTION ........................................... 174

Revision: 2013 October SRC-4 2014 CUBE

Revision: 2013 October SRC-5 2014 CUBE

Revision: 2013 October SRC-6 2014 CUBE

Revision: 2013 October SRC-7 2014 CUBE

Revision: 2013 October SRC-8 2014 CUBE

Revision: 2013 October SRC-9 2014 CUBE

Revision: 2013 October SRC-10 2014 CUBE

Revision: 2013 October SRC-11 2014 CUBE

Revision: 2013 October SRC-12 2014 CUBE

Revision: 2013 October SRC-13 2014 CUBE

Component Description INFOID:0000000009946088

Revision: 2013 October SRC-14 2014 CUBE

OCCUPANT DETECTION SYSTEM B

System Description INFOID:0000000009946090

Revision: 2013 October SRC-15 2014 CUBE

Revision: 2013 October SRC-16 2014 CUBE

Component parts Outline of function

Revision: 2013 October SRC-17 2014 CUBE

Diagnosis with Air Bag Warning Lamp INFOID:0000000009946094

SELF DIAGNOSIS FUNCTION

Revision: 2013 October SRC-18 2014 CUBE

Erase “Self Diagnostic Result”

• Air bag diagnosis sensor unit is mal-

• Air bag diagnosis sensor unit is mal- M

Revision: 2013 October SRC-19 2014 CUBE

Revision: 2013 October SRC-20 2014 CUBE

How to Erase Self Diagnosis Result J

Revision: 2013 October SRC-21 2014 CUBE

• Side air bag system

Multiple Systems Malfunction

• Side air bag system

• Front air bag system and side air bag system

Revision: 2013 October SRC-22 2014 CUBE

Revision: 2013 October SRC-23 2014 CUBE

Diagnosis mode Description

CAUSE OF WARNING LAMP

Display contents of CONSULT Description

Revision: 2013 October SRC-24 2014 CUBE

ZERO POINT RESET DESCRIPTION B

Monitor item Description D

Revision: 2013 October SRC-25 2014 CUBE

DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE

Revision: 2013 October SRC-26 2014 CUBE

Revision: 2013 October SRC-27 2014 CUBE

DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE

Revision: 2013 October SRC-28 2014 CUBE

Revision: 2013 October SRC-29 2014 CUBE

DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE

Revision: 2013 October SRC-30 2014 CUBE