Sigmacover 410

Conforms to Regulation (EC) No.
1907/2006 (REACH), Annex II, as amended by Regulation (EU) United

No. 2015/830 Kingdom (UK)
SAFETY DATA SHEET

Date of issue/Date of revision : 22 November 2017 Version : 21
SECTION 1: Identification of the substance/mixture and of the company/

undertaking
1.1 Product identifier
Product name : SIGMACOVER 246/410/430 LT HARDENER
Product code : 00250027
Other means of : Not available.
identification
1.2 Relevant identified uses of the substance or mixture and uses advised against
Product use : Professional applications, Used by spraying.
Use of the substance/ : Coating.
mixture
1.3 Details of the supplier of the safety data sheet

PPG Coatings SPRL/BVBA
Tweemontstraat 104
B-2100 Deurne
Belgium
Telephone +32-33606311
Fax +32-33606435
e-mail address of person : PMC.Safety@PPG.com

responsible for this SDS
1.4 Emergency telephone number

Supplier
Telephone number :
+31 20 4075210
SECTION 2: Hazards identification

2.1 Classification of the substance or mixture
Product definition : Mixture
Classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]
Flam. Liq. 2, H225
Acute Tox. 4, H302
Skin Corr. 1B, H314
Eye Dam. 1, H318
Skin Sens. 1, H317
Repr. 2, H361fd (Fertility and Unborn child)
STOT SE 3, H335
STOT RE 2, H373
Aquatic Acute 1, H400
Aquatic Chronic 1, H410
The product is classified as hazardous according to Regulation (EC) 1272/2008 as amended.
See Section 16 for the full text of the H statements declared above.
English (GB) United Kingdom (UK) 1/20

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Regulation (EU) No. 2015/830
Code : 00250027 Date of issue/Date of revision : 22 November 2017
SIGMACOVER 246/410/430 LT HARDENER

See Section 11 for more detailed information on health effects and symptoms.
2.2 Label elements

Hazard pictograms :
Signal word : Danger

Hazard statements : Highly flammable liquid and vapour.
Harmful if swallowed.
Causes severe skin burns and eye damage.
May cause an allergic skin reaction.
Suspected of damaging fertility. Suspected of damaging the unborn child.
May cause respiratory irritation.
May cause damage to organs through prolonged or repeated exposure.
Very toxic to aquatic life with long lasting effects.
Precautionary statements
Prevention : Wear protective gloves. Wear protective clothing. Wear eye or face protection.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.
No smoking. Do not breathe vapour.
Response : IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF
SWALLOWED: Immediately call a POISON CENTER or physician. IF ON SKIN (or
hair): Take off immediately all contaminated clothing. Rinse skin with water. IF IN
EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.
Storage : Store in a well-ventilated place. Keep cool.
Disposal : Not applicable.
P280, P210, P260, P304 + P340, P301 + P310, P303 + P361 + P353, P305 + P351
+ P338, P403, P235
Hazardous ingredients : ethylbenzene
nonylphenol
xylene
Cashew, nutshell liq., polymer with diethylenetriamine and formaldehyde
Epoxy Resin
Alkylated phenolic polyamine
3-aminopropyldimethylamine
2,2'-iminodiethylamine
3,6-diazaoctanethylenediamin
Cashew, nutshell liq.
Supplemental label : Not applicable.
elements
Annex XVII - Restrictions : Not applicable.
on the manufacture,
placing on the market and
use of certain dangerous
substances, mixtures and
articles
Special packaging requirements
Containers to be fitted : Not applicable.
with child-resistant
fastenings
Tactile warning of danger : Not applicable.

2.3 Other hazards

Other hazards which do : Prolonged or repeated contact may dry skin and cause irritation.
not result in classification
SECTION 3: Composition/information on ingredients

3.2 Mixtures : Mixture
Classification
Product/ingredient name Identifiers % by weight Regulation (EC) No. Type
1272/2008 [CLP]
ethylbenzene REACH #: 01-2119489370-35 ≥10 - ≤25 Flam. Liq. 2, H225 [1] [2]
EC: 202-849-4 Acute Tox. 4, H332
CAS: 100-41-4 STOT RE 2, H373
Index: 601-023-00-4 (hearing organs)
Asp. Tox. 1, H304
nonylphenol EC: 246-672-0 ≥10 - ≤25 Acute Tox. 4, H302 [1] [5]
CAS: 25154-52-3 Skin Corr. 1B, H314
Index: 601-053-00-8 Eye Dam. 1, H318
Repr. 2, H361fd
(Fertility and Unborn
child)
(M=10)
(M=10)
xylene REACH #: 01-2119488216-32 ≥10 - ≤25 Flam. Liq. 3, H226 [1] [2]
EC: 215-535-7 Acute Tox. 4, H312
CAS: 1330-20-7 Acute Tox. 4, H332
Index: 601-022-00-9 Skin Irrit. 2, H315
Eye Irrit. 2, H319
STOT SE 3, H335
STOT RE 2, H373
(central nervous system
(CNS), kidneys, liver)
Asp. Tox. 1, H304
Cashew, nutshell liq., polymer CAS: 68413-29-6 ≥10 - ≤25 Acute Tox. 4, H302 [1]
with diethylenetriamine and Acute Tox. 4, H312
formaldehyde Skin Corr. 1B, H314
Eye Dam. 1, H318
Skin Sens. 1, H317
Epoxy Resin CAS: SUB118913 ≥5.0 - ≤10 Skin Irrit. 2, H315 [1]
Eye Dam. 1, H318
STOT SE 3, H335
2-methylpropan-1-ol REACH #: 01-2119484609-23 ≥5.0 - ≤10 Flam. Liq. 3, H226 [1] [2]
EC: 201-148-0 Skin Irrit. 2, H315
CAS: 78-83-1 Eye Dam. 1, H318
Index: 603-108-00-1 STOT SE 3, H335
STOT SE 3, H336
Fatty acids, C18-unsatd., dimers, CAS: 68410-23-1 ≥1.0 - ≤5.0 Skin Irrit. 2, H315 [1]
reaction products with Eye Irrit. 2, H319
polyethylenepolyamines
2,4,6-tris(dimethylaminomethyl) EC: 202-013-9 ≥1.0 - ≤5.0 Acute Tox. 4, H302 [1]
phenol CAS: 90-72-2 Skin Irrit. 2, H315
Index: 603-069-00-0 Eye Irrit. 2, H319
Alkylated phenolic polyamine - <1.0 Skin Irrit. 2, H315 [1]

SECTION 3: Composition/information on ingredients

Eye Irrit. 2, H319
Resp. Sens. 1, H334
Skin Sens. 1, H317
3-aminopropyldimethylamine REACH #: 01-2119486842-27 <1.0 Flam. Liq. 3, H226 [1]
EC: 203-680-9 Acute Tox. 4, H302
CAS: 109-55-7 Acute Tox. 4, H312
Index: 612-061-00-6 Skin Corr. 1B, H314
Eye Dam. 1, H318
Skin Sens. 1, H317
2,2'-iminodiethylamine REACH #: 01-2119473793-27 ≤0.30 Acute Tox. 4, H302 [1] [2]
EC: 203-865-4 Acute Tox. 4, H312
CAS: 111-40-0 Acute Tox. 2, H330
Index: 612-058-00-X Skin Corr. 1B, H314
Eye Dam. 1, H318
Skin Sens. 1B, H317
STOT SE 3, H335
3,6-diazaoctanethylenediamin EC: 203-950-6 ≤0.30 Acute Tox. 4, H312 [1]
CAS: 112-24-3 Skin Corr. 1B, H314
Index: 612-059-00-5 Eye Dam. 1, H318
Skin Sens. 1, H317
Cashew, nutshell liq. EC: 232-355-4 ≤0.30 Acute Tox. 4, H302 [1]
CAS: 8007-24-7 Acute Tox. 4, H312
Skin Irrit. 2, H315
Eye Dam. 1, H318
Skin Sens. 1, H317
p-nonylphenol EC: 203-199-4 ≤0.10 Acute Tox. 4, H302 [1] [5]
CAS: 104-40-5 Skin Corr. 1B, H314
Eye Dam. 1, H318
Repr. 2, H361fd
(Fertility and Unborn
child)
(M=10)
(M=10)
See Section 16 for the
full text of the H
statements declared
above.
There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations
applicable, are classified as hazardous to health or the environment, are PBTs or vPvBs or have been assigned a
workplace exposure limit and hence require reporting in this section.
Type
[1] Substance classified with a health or environmental hazard
[2] Substance with a workplace exposure limit
[3] Substance meets the criteria for PBT according to Regulation (EC) No. 1907/2006, Annex XIII
[4] Substance meets the criteria for vPvB according to Regulation (EC) No. 1907/2006, Annex XIII
[5] Substance of equivalent concern
[6] Additional disclosure due to company policy
Occupational exposure limits, if available, are listed in Section 8.
SUB codes represent substances without registered CAS Numbers.

SECTION 4: First aid measures

4.1 Description of first aid measures
Eye contact : Check for and remove any contact lenses. Immediately flush eyes with running water
for at least 15 minutes, keeping eyelids open. Seek immediate medical attention.
Inhalation : Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is
irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by
trained personnel.
Skin contact : Remove contaminated clothing and shoes. Wash skin thoroughly with soap and
water or use recognised skin cleanser. Do NOT use solvents or thinners.
Ingestion : If swallowed, seek medical advice immediately and show the container or label. Keep
person warm and at rest. Do NOT induce vomiting.
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. If it is
suspected that fumes are still present, the rescuer should wear an appropriate mask
or self-contained breathing apparatus. It may be dangerous to the person providing
aid to give mouth-to-mouth resuscitation. Wash contaminated clothing thoroughly
with water before removing it, or wear gloves.
4.2 Most important symptoms and effects, both acute and delayed
Potential acute health effects
Eye contact : Causes serious eye damage.
Inhalation : May cause respiratory irritation.
Skin contact : Causes severe burns. Defatting to the skin. May cause an allergic skin reaction.
Ingestion : Harmful if swallowed.
Over-exposure signs/symptoms
Eye contact : Adverse symptoms may include the following:
pain
watering
redness
Inhalation : Adverse symptoms may include the following:
respiratory tract irritation
coughing
reduced foetal weight
increase in foetal deaths
skeletal malformations
Skin contact : Adverse symptoms may include the following:
pain or irritation
redness
dryness
cracking
blistering may occur
Ingestion : Adverse symptoms may include the following:
stomach pains
4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician : In case of inhalation of decomposition products in a fire, symptoms may be delayed.
The exposed person may need to be kept under medical surveillance for 48 hours.
Specific treatments : No specific treatment.

SECTION 5: Firefighting measures

5.1 Extinguishing media
Suitable extinguishing : Use dry chemical, CO₂, water spray (fog) or foam.
media
Unsuitable extinguishing : Do not use water jet.

media
5.2 Special hazards arising from the substance or mixture

Hazards from the : Highly flammable liquid and vapour. Runoff to sewer may create fire or explosion
substance or mixture hazard. In a fire or if heated, a pressure increase will occur and the container may
burst, with the risk of a subsequent explosion. This material is very toxic to aquatic life
with long lasting effects. Fire water contaminated with this material must be
contained and prevented from being discharged to any waterway, sewer or drain.
Hazardous combustion : Decomposition products may include the following materials:
products carbon oxides
nitrogen oxides
halogenated compounds
5.3 Advice for firefighters

Special precautions for fire- : Promptly isolate the scene by removing all persons from the vicinity of the incident if
fighters there is a fire. No action shall be taken involving any personal risk or without suitable
training. Move containers from fire area if this can be done without risk. Use water
spray to keep fire-exposed containers cool.
Special protective : Fire-fighters should wear appropriate protective equipment and self-contained
equipment for fire-fighters breathing apparatus (SCBA) with a full face-piece operated in positive pressure
mode. Clothing for fire-fighters (including helmets, protective boots and gloves)
conforming to European standard EN 469 will provide a basic level of protection for
chemical incidents.
SECTION 6: Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures
For non-emergency : No action shall be taken involving any personal risk or without suitable training.
personnel Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilt material. Shut off all ignition sources.
No flares, smoking or flames in hazard area. Do not breathe vapour or mist. Provide
adequate ventilation. Wear appropriate respirator when ventilation is inadequate.
Put on appropriate personal protective equipment.
For emergency responders : If specialised clothing is required to deal with the spillage, take note of any
information in Section 8 on suitable and unsuitable materials. See also the
information in "For non-emergency personnel".
6.2 Environmental : Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains
precautions and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air). Water polluting material. May be harmful
to the environment if released in large quantities. Collect spillage.
6.3 Methods and material for containment and cleaning up

Small spill : Stop leak if without risk. Move containers from spill area. Use spark-proof tools and
explosion-proof equipment. Dilute with water and mop up if water-soluble.
Alternatively, or if water-insoluble, absorb with an inert dry material and place in an
appropriate waste disposal container. Dispose of via a licensed waste disposal
contractor.

SECTION 6: Accidental release measures

Large spill : Stop leak if without risk. Move containers from spill area. Use spark-proof tools and
explosion-proof equipment. Approach the release from upwind. Prevent entry into
sewers, water courses, basements or confined areas. Wash spillages into an
effluent treatment plant or proceed as follows. Contain and collect spillage with non-
combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth
and place in container for disposal according to local regulations. Dispose of via a
licensed waste disposal contractor. Contaminated absorbent material may pose the
same hazard as the spilt product.
6.4 Reference to other : See Section 1 for emergency contact information.
sections See Section 8 for information on appropriate personal protective equipment.
See Section 13 for additional waste treatment information.
SECTION 7: Handling and storage

The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be
consulted for any available use-specific information provided in the Exposure Scenario(s).
7.1 Precautions for safe handling
Protective measures : Put on appropriate personal protective equipment (see Section 8). Eating, drinking
and smoking should be prohibited in areas where this material is handled, stored and
processed. Workers should wash hands and face before eating, drinking and
smoking. Remove contaminated clothing and protective equipment before entering
eating areas. Persons with a history of skin sensitization problems should not be
employed in any process in which this product is used. Avoid exposure during
pregnancy. Do not get in eyes or on skin or clothing. Do not breathe vapour or mist.
Do not ingest. Avoid release to the environment. Refer to special instructions/safety
data sheet. Use only with adequate ventilation. Wear appropriate respirator when
ventilation is inadequate. Do not enter storage areas and confined spaces unless
adequately ventilated. Keep in the original container or an approved alternative
made from a compatible material, kept tightly closed when not in use. Store and use
away from heat, sparks, open flame or any other ignition source. Use explosion-
proof electrical (ventilating, lighting and material handling) equipment. Use non-
sparking tools. Take precautionary measures against electrostatic discharges. To
avoid fire or explosion, dissipate static electricity during transfer by earthing and
bonding containers and equipment before transferring material. Empty containers
retain product residue and can be hazardous. Do not reuse container.
Advice on general : Eating, drinking and smoking should be prohibited in areas where this material is
occupational hygiene handled, stored and processed. Workers should wash hands and face before eating,
drinking and smoking. Remove contaminated clothing and protective equipment
before entering eating areas. See also Section 8 for additional information on
hygiene measures.
7.2 Conditions for safe : Storage temperature: 0 to 35°C (32 to 95°F). Store in accordance with local
storage, including any regulations. Store in a segregated and approved area. Store in original container
incompatibilities protected from direct sunlight in a dry, cool and well-ventilated area, away from
incompatible materials (see Section 10) and food and drink. Store locked up.
Eliminate all ignition sources. Separate from oxidizing materials. Keep container
tightly closed and sealed until ready for use. Containers that have been opened must
be carefully resealed and kept upright to prevent leakage. Do not store in unlabelled
containers. Use appropriate containment to avoid environmental contamination. See
Section 10 for incompatible materials before handling or use.
7.3 Specific end use(s)

See Section 1.2 for Identified uses.

SECTION 8: Exposure controls/personal protection

8.1 Control parameters
Occupational exposure limits
Product/ingredient name Exposure limit values
ethylbenzene EH40/2005 WELs (United Kingdom (UK), 12/2011). Absorbed
through skin.
STEL: 552 mg/m³ 15 minutes.
STEL: 125 ppm 15 minutes.
TWA: 441 mg/m³ 8 hours.
TWA: 100 ppm 8 hours.
xylene EH40/2005 WELs (United Kingdom (UK), 12/2011). Absorbed
through skin.
2-methylpropan-1-ol EH40/2005 WELs (United Kingdom (UK), 12/2011).
2,2'-iminodiethylamine EH40/2005 WELs (United Kingdom (UK), 12/2011). Absorbed
through skin.
TWA: 4.3 mg/m³ 8 hours.
TWA: 1 ppm 8 hours.
Recommended monitoring : If this product contains ingredients with exposure limits, personal, workplace
procedures atmosphere or biological monitoring may be required to determine the effectiveness
of the ventilation or other control measures and/or the necessity to use respiratory
protective equipment. Reference should be made to monitoring standards, such as
the following: European Standard EN 689 (Workplace atmospheres - Guidance for
the assessment of exposure by inhalation to chemical agents for comparison with
limit values and measurement strategy) European Standard EN 14042 (Workplace
atmospheres - Guide for the application and use of procedures for the assessment of
exposure to chemical and biological agents) European Standard EN 482
(Workplace atmospheres - General requirements for the performance of procedures
for the measurement of chemical agents) Reference to national guidance
documents for methods for the determination of hazardous substances will also be
required.
DNELs
Product/ingredient name Type Exposure Value Population Effects
ethylbenzene DNEL Long term 77 mg/m³ Workers Systemic
Inhalation
DNEL Short term 293 mg/m³ Workers Local
Inhalation
DNEL Long term Dermal 180 mg/kg Workers Systemic
bw/day
DNEL Long term 15 mg/m³ Consumers Systemic
Inhalation
DNEL Long term Oral 1.6 mg/kg Consumers Systemic
bw/day
xylene DNEL Short term 289 mg/m³ Workers Systemic
Inhalation
DNEL Short term 289 mg/m³ Workers Local


Inhalation
DNEL Long term Dermal 180 mg/kg Workers Systemic
bw/day
DNEL Long term 77 mg/m³ Workers Systemic
Inhalation
DNEL Short term 174 mg/m³ Consumers Systemic
Inhalation
DNEL Short term 174 mg/m³ Consumers Local
Inhalation
DNEL Long term Dermal 108 mg/kg Consumers Systemic
bw/day
DNEL Long term 14.8 mg/m³ Consumers Systemic
Inhalation
DNEL Long term Oral 1.6 mg/kg Consumers Systemic
bw/day
2-methylpropan-1-ol DNEL Long term 310 mg/m³ Workers Local
Inhalation
DNEL Long term 55 mg/m³ Consumers Local
Inhalation
3-aminopropyldimethylamine DNEL Long term 4.9 mg/m³ Workers Systemic
Inhalation
DNEL Short term 9.8 mg/m³ Workers Systemic
Inhalation
2,2'-iminodiethylamine DNEL Long term 15.4 mg/m³ Workers Systemic
Inhalation
DNEL Short term 92.1 mg/m³ Workers Systemic
Inhalation
DNEL Long term 0.87 mg/m³ Workers Local
Inhalation
DNEL Short term 2.6 mg/ Workers Local
Inhalation person/day
DNEL Long term Dermal 11.4 mg/ Workers Systemic
kg bw/day
DNEL Long term Dermal 1.1 mg/cm² Workers Local
DNEL Long term 4.6 mg/m³ Consumers Systemic
Inhalation
DNEL Short term 27.5 mg/m³ Consumers Systemic
Inhalation
DNEL Long term Dermal 4.88 mg/ Consumers Systemic
kg bw/day
DNEL Short term Dermal 4.88 mg/ Consumers Systemic
kg bw/day
PNECs
Product/ingredient name Type Compartment Detail Value Method Detail
ethylbenzene - Fresh water 0.1 mg/l Assessment Factors
- Marine water 0.01 mg/l Assessment Factors
- Sewage Treatment 9.6 mg/l Assessment Factors
Plant
- Fresh water sediment 13.7 mg/kg dwt Equilibrium Partitioning
- Marine water sediment 1.37 mg/kg dwt Equilibrium Partitioning
- Soil 2.68 mg/kg dwt Equilibrium Partitioning
- Secondary Poisoning 20 mg/kg -
xylene - Fresh water 0.327 mg/l -
- Marine water 0.327 mg/l -
- Sewage Treatment 6.58 mg/l -
Plant
- Fresh water sediment 12.46 mg/kg dwt -

- Marine water sediment 12.46 mg/kg dwt -
- Soil 2.31 mg/kg -
2-methylpropan-1-ol - Fresh water 0.4 mg/l Assessment Factors
- Sewage Treatment 10 mg/l Assessment Factors
Plant
- Marine water sediment 0.156 mg/kg dwt -
3-aminopropyldimethylamine - Fresh water 0.034 mg/l Assessment Factors
- Sewage Treatment 69.5 mg/l Assessment Factors
Plant
2,2'-iminodiethylamine - Fresh water 0.56 mg/l Assessment Factors
- Sewage Treatment 6 mg/l Assessment Factors
Plant
- Fresh water sediment 1072 mg/kg dwt Equilibrium Partitioning
- Soil 7.97 mg/kg dwt -
8.2 Exposure controls

Appropriate engineering : Use only with adequate ventilation. Use process enclosures, local exhaust
controls ventilation or other engineering controls to keep worker exposure to airborne
contaminants below any recommended or statutory limits. The engineering controls
also need to keep gas, vapour or dust concentrations below any lower explosive
limits. Use explosion-proof ventilation equipment.
Individual protection measures
Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Contaminated work clothing should not be allowed out of the workplace. Wash
contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Eye/face protection : Chemical splash goggles and face shield. Use eye protection according to EN 166.
Skin protection
Hand protection : Chemical-resistant, impervious gloves complying with an approved standard should
be worn at all times when handling chemical products if a risk assessment indicates
this is necessary. Considering the parameters specified by the glove manufacturer,
check during use that the gloves are still retaining their protective properties. It
should be noted that the time to breakthrough for any glove material may be
different for different glove manufacturers. In the case of mixtures, consisting of
several substances, the protection time of the gloves cannot be accurately estimated.
When prolonged or frequently repeated contact may occur, a glove with a protection
class of 6 (breakthrough time greater than 480 minutes according to EN 374) is
recommended. When only brief contact is expected, a glove with a protection class
of 2 or higher (breakthrough time greater than 30 minutes according to EN 374) is
recommended.
Gloves : butyl rubber


Body protection : Personal protective equipment for the body should be selected based on the task
being performed and the risks involved and should be approved by a specialist
before handling this product. When there is a risk of ignition from static electricity,
wear anti-static protective clothing. For the greatest protection from static
discharges, clothing should include anti-static overalls, boots and gloves. Refer to
European Standard EN 1149 for further information on material and design
requirements and test methods.
Other skin protection : Appropriate footwear and any additional skin protection measures should be
selected based on the task being performed and the risks involved and should be
approved by a specialist before handling this product.
Respiratory protection : By spraying: air-fed respirator. By other operations than spraying, in well ventilated
areas, air-fed respirators could be replaced by a combination charcoal filter and
particulate filter mask. Respirator selection must be based on known or anticipated
exposure levels, the hazards of the product and the safe working limits of the
selected respirator. If workers are exposed to concentrations above the exposure
limit, they must use appropriate, certified respirators. Use a properly fitted, air-
purifying or air-fed respirator complying with an approved standard if a risk
assessment indicates this is necessary. Wear a respirator conforming to EN140.
Filter type: organic vapour (Type A) and particulate filter P3
Environmental exposure : Emissions from ventilation or work process equipment should be checked to ensure
controls they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.
SECTION 9: Physical and chemical properties

9.1 Information on basic physical and chemical properties
Appearance
Physical state : Liquid.
Colour : Not available.
Odour : Amine-like.
Odour threshold : Not available.
pH : insoluble in water.
Melting point/freezing point : May start to solidify at the following temperature: -8°C (17.6°F) This is based on
data for the following ingredient: nonylphenol. Weighted average: -68.78°C (-91.
8°F)
Initial boiling point and boiling : >37.78°C
range
Flash point : Closed cup: 20°C
Evaporation rate : Highest known value: 0.84 (ethylbenzene) Weighted average: 0.57compared
with butyl acetate
Material supports combustion. : Yes.
Flammability (solid, gas) : liquid
Upper/lower flammability or : Greatest known range: Lower: 1.7% Upper: 10.9% (2-methylpropan-1-ol)
explosive limits
Vapour pressure : Highest known value: <1.6 kPa (<12 mm Hg) (at 20°C) (2-methylpropan-1-ol).
Weighted average: 0.73 kPa (5.48 mm Hg) (at 20°C)
Vapour density : Highest known value: 7.59 (Air = 1) (nonylphenol). Weighted average: 4.6 (Air
= 1)
Relative density : 0.92
Solubility(ies) : Insoluble in the following materials: cold water.

SECTION 9: Physical and chemical properties

Partition coefficient: n-octanol/ : Not applicable.
water
Auto-ignition temperature : Lowest known value: 370°C (698°F) (nonylphenol).
Decomposition temperature : Stable under recommended storage and handling conditions (see Section 7).
Viscosity : Kinematic (40°C): >0.21 cm 2/s
Explosive properties : Product does not present an explosion hazard.
Oxidising properties : Product does not present an oxidizing hazard.
9.2 Other information

No additional information.
SECTION 10: Stability and reactivity

10.1 Reactivity : No specific test data related to reactivity available for this product or its ingredients.
10.2 Chemical stability : The product is stable.
10.3 Possibility of : Under normal conditions of storage and use, hazardous reactions will not occur.
hazardous reactions
10.4 Conditions to avoid : When exposed to high temperatures may produce hazardous decomposition
products.
Refer to protective measures listed in sections 7 and 8.
10.5 Incompatible materials : Keep away from the following materials to prevent strong exothermic reactions:
oxidising agents, strong alkalis, strong acids.
10.6 Hazardous : Depending on conditions, decomposition products may include the following
decomposition products materials: carbon oxides nitrogen oxides halogenated compounds
SECTION 11: Toxicological information

11.1 Information on toxicological effects
Acute toxicity
Product/ingredient name Result Species Dose Exposure
ethylbenzene LC50 Inhalation Vapour Rat 17.8 mg/l 4 hours
LD50 Dermal Rabbit 17.8 g/kg -
LD50 Oral Rat 3.5 g/kg -
nonylphenol LD50 Dermal Rabbit 2.14 g/kg -
LD50 Oral Rat 580 mg/kg -
xylene LD50 Dermal Rabbit >1.7 g/kg -
2-methylpropan-1-ol LD50 Dermal Rabbit 3400 mg/kg -
2,4,6-tris LD50 Dermal Rabbit 1.28 g/kg -
(dimethylaminomethyl)
phenol
LD50 Dermal Rat 1280 mg/kg -
3-aminopropyldimethylamine LD50 Dermal Rabbit 0.54 g/kg -
2,2'-iminodiethylamine LC50 Inhalation Dusts and mists Rat 0.07 to 0.3 mg/l 4 hours


LD50 Dermal Rabbit 1090 mg/kg -
3, LD50 Dermal Rabbit 805 mg/kg -
6-diazaoctanethylenediamin
p-nonylphenol LD50 Oral Rat 1620 mg/kg -
Conclusion/Summary : There are no data available on the mixture itself.
Acute toxicity estimates
Route ATE value
Oral 1832.7 mg/kg
Dermal 4406.5 mg/kg
Inhalation (vapours) 40.2 mg/l
Inhalation (dusts and mists) 20.59 mg/l
Irritation/Corrosion
Product/ingredient name Result Species Score Exposure Observation
xylene Skin - Moderate irritant Rabbit - 24 hours 500 -
mg
Conclusion/Summary
Skin : There are no data available on the mixture itself.
Eyes : There are no data available on the mixture itself.
Respiratory : There are no data available on the mixture itself.
Sensitisation
Conclusion/Summary
Skin : There are no data available on the mixture itself.
Respiratory : There are no data available on the mixture itself.
Mutagenicity
Carcinogenicity
Reproductive toxicity
Teratogenicity
Specific target organ toxicity (single exposure)
Product/ingredient name Category Route of Target organs
exposure
xylene Category 3 Not applicable. Respiratory tract
irritation
Epoxy Resin Category 3 Not applicable. Respiratory tract
irritation
2-methylpropan-1-ol Category 3 Not applicable. Respiratory tract
irritation and
Narcotic effects
2,2'-iminodiethylamine Category 3 Not applicable. Respiratory tract
irritation
Specific target organ toxicity (repeated exposure)


Product/ingredient name Category Route of Target organs
exposure
ethylbenzene Category 2 Not determined hearing organs
xylene Category 2 Not determined central nervous
system (CNS),
kidneys and liver
Aspiration hazard
Product/ingredient name Result
ethylbenzene ASPIRATION HAZARD - Category 1
xylene ASPIRATION HAZARD - Category 1
Information on likely : Not available.
routes of exposure
Potential acute health effects
Inhalation : May cause respiratory irritation.
Ingestion : Harmful if swallowed.
Skin contact : Causes severe burns. Defatting to the skin. May cause an allergic skin reaction.
Eye contact : Causes serious eye damage.
Symptoms related to the physical, chemical and toxicological characteristics
Inhalation : Adverse symptoms may include the following:
respiratory tract irritation
coughing
Ingestion : Adverse symptoms may include the following:
stomach pains
Skin contact : Adverse symptoms may include the following:
pain or irritation
redness
dryness
cracking
blistering may occur
Eye contact : Adverse symptoms may include the following:
pain
watering
redness
Delayed and immediate effects as well as chronic effects from short and long-term exposure
Short term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Long term exposure
Potential immediate : Not available.
effects


Potential delayed effects : Not available.
Potential chronic health effects
Not available.
Conclusion/Summary : Not available.

General : May cause damage to organs through prolonged or repeated exposure. Prolonged
or repeated contact can defat the skin and lead to irritation, cracking and/or
dermatitis. Once sensitized, a severe allergic reaction may occur when subsequently
exposed to very low levels.
Carcinogenicity : No known significant effects or critical hazards.
Mutagenicity : No known significant effects or critical hazards.
Teratogenicity : Suspected of damaging the unborn child.
Developmental effects : No known significant effects or critical hazards.
Fertility effects : Suspected of damaging fertility.
Other information : Not available.
There are no data available on the mixture itself. The mixture has been assessed following the conventional method of
the CLP Regulation (EC) No 1272/2008 and is classified for toxicological properties accordingly. See Sections 2 and 3
for details.
Exposure to component solvent vapour concentrations in excess of the stated occupational exposure limit may result in
adverse health effects such as mucous membrane and respiratory system irritation and adverse effects on the kidneys,
liver and central nervous system. Symptoms and signs include headache, dizziness, fatigue, muscular weakness,
drowsiness and, in extreme cases, loss of consciousness.
Solvents may cause some of the above effects by absorption through the skin. Repeated or prolonged contact with the
mixture may cause removal of natural fat from the skin, resulting in non-allergic contact dermatitis and absorption
through the skin.
If splashed in the eyes, the liquid may cause irritation and reversible damage.
Ingestion may cause nausea, diarrhea and vomiting.
This takes into account, where known, delayed and immediate effects and also chronic effects of components from
short-term and long-term exposure by oral, inhalation and dermal routes of exposure and eye contact.
Contains Cashew, nutshell liq., polymer with diethylenetriamine and formaldehyde, Alkylated phenolic polyamine,
3-aminopropyldimethylamine, 2,2'-iminodiethylamine, 3,6-diazaoctanethylenediamin, Cashew, nutshell liq.. May
produce an allergic reaction.
SECTION 12: Ecological information

12.1 Toxicity
Product/ingredient name Result Species Exposure
ethylbenzene Acute LC50 150 to 200 mg/l Fresh Fish - Lepomis macrochirus - 96 hours
water Young of the year
nonylphenol Acute EC50 0.056 mg/l Fresh water Algae - Scenedesmus 72 hours
subspicatus
Chronic EC10 0.003 mg/l Fresh water Algae - Scenedesmus 72 hours
subspicatus
Chronic NOEC 1 μg/l Fresh water Daphnia - Daphnia magna 21 days
12.2 Persistence and degradability

Conclusion/Summary : Not available.
Product/ingredient name Aquatic half-life Photolysis Biodegradability
ethylbenzene - - Readily
xylene - - Readily

SECTION 12: Ecological information
12.3 Bioaccumulative potential

Product/ingredient name LogPow BCF Potential
ethylbenzene 3.15 79.43 low
nonylphenol 3.28 154.88 low
xylene 3.16 7.4 to 18.5 low
2-methylpropan-1-ol 0.76 - low
3-aminopropyldimethylamine -0.352 - low
2,2'-iminodiethylamine -1.3 4.47 low
3, -1.66 to -1.4 - low
6-diazaoctanethylenediamin
p-nonylphenol 5.76 380.19 low
12.4 Mobility in soil

Soil/water partition : Not available.
coefficient (KOC)
Mobility : Not available.
12.5 Results of PBT and vPvB assessment

PBT : Not applicable.
vPvB : Not applicable.
12.6 Other adverse effects : No known significant effects or critical hazards.
SECTION 13: Disposal considerations

13.1 Waste treatment methods
Product
Methods of disposal : The generation of waste should be avoided or minimised wherever possible.
Disposal of this product, solutions and any by-products should at all times comply
with the requirements of environmental protection and waste disposal legislation and
any regional local authority requirements. Dispose of surplus and non-recyclable
products via a licensed waste disposal contractor. Waste should not be disposed of
untreated to the sewer unless fully compliant with the requirements of all authorities
with jurisdiction.
Hazardous waste : Yes.
European waste catalogue (EWC)
Waste code Waste designation
08 01 11* waste paint and varnish containing organic solvents or other hazardous substances
Packaging
Methods of disposal : The generation of waste should be avoided or minimised wherever possible. Waste
packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible.
Type of packaging European waste catalogue (EWC)
Container 15 01 06 mixed packaging

SECTION 13: Disposal considerations

Special precautions : This material and its container must be disposed of in a safe way. Care should be
taken when handling emptied containers that have not been cleaned or rinsed out.
Empty containers or liners may retain some product residues. Vapour from product
residues may create a highly flammable or explosive atmosphere inside the
container. Do not cut, weld or grind used containers unless they have been cleaned
thoroughly internally. Avoid dispersal of spilt material and runoff and contact with
soil, waterways, drains and sewers.
14. Transport information

ADR/RID ADN IMDG IATA
14.1 UN number UN3469 UN3469 UN3469 UN3469
14.2 UN proper PAINT, FLAMMABLE, PAINT, FLAMMABLE, PAINT, FLAMMABLE, PAINT, FLAMMABLE,
shipping name CORROSIVE CORROSIVE CORROSIVE CORROSIVE
14.3 Transport 3 (8) 3 (8) 3 (8) 3 (8)
hazard class(es)
14.4 Packing group II II II II
14.5 Yes. Yes. Yes. Yes. The
Environmental environmentally
hazards hazardous substance
mark is not required.
Marine pollutant Not applicable. Not applicable. (nonylphenol) Not applicable.
substances
Additional information
ADR/RID : The environmentally hazardous substance mark is not required when transported in sizes of ≤5 L
or ≤5 kg.
Tunnel code : (D/E)
ADN : The environmentally hazardous substance mark is not required when transported in sizes of ≤5 L
or ≤5 kg.
IMDG : The marine pollutant mark is not required when transported in sizes of ≤5 L or ≤5 kg.
IATA : The environmentally hazardous substance mark may appear if required by other transportation
regulations.
14.6 Special precautions for : Transport within user’s premises: always transport in closed containers that are
user upright and secure. Ensure that persons transporting the product know what to do in
the event of an accident or spillage.
14.7 Transport in bulk : Not applicable.

according to Annex II of
Marpol and the IBC Code
SECTION 15: Regulatory information

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
EU Regulation (EC) No. 1907/2006 (REACH)
Annex XIV - List of substances subject to authorisation
Annex XIV
None of the components are listed.
Substances of very high concern

SECTION 15: Regulatory information

Ingredient name Intrinsic property Status Reference Date of
number revision
nonylphenol Substance of Candidate ED/169/2012 4/19/2013
equivalent concern for
environment
p-nonylphenol Substance of Recommended ED/169/2012 12/19/2012
equivalent concern for
environment
Annex XVII - Restrictions : Not applicable.
on the manufacture,
placing on the market and
use of certain dangerous
substances, mixtures and
articles
Other EU regulations
Ozone depleting substances (1005/2009/EU)
Not listed.
Seveso Directive
This product is controlled under the Seveso Directive.
Danger criteria
Category
P5c: Flammable liquids 2 and 3 not falling under P5a or P5b
E1: Hazardous to the aquatic environment - Acute 1 or Chronic 1
7b: Highly flammable (R11)
9i: Very toxic for the environment
15.2 Chemical safety : No Chemical Safety Assessment has been carried out.
assessment
SECTION 16: Other information

Indicates information that has changed from previously issued version.
Abbreviations and acronyms
ATE = Acute Toxicity Estimate
CLP = Classification, Labelling and Packaging Regulation [Regulation (EC) No. 1272/2008]
DNEL = Derived No Effect Level
EUH statement = CLP-specific Hazard statement
PNEC = Predicted No Effect Concentration
RRN = REACH Registration Number
PBT = Persistent, Bioaccumulative and Toxic
vPvB = Very Persistent and Very Bioaccumulative
ADR = The European Agreement concerning the International Carriage of Dangerous Goods by Road
ADN = European Provisions concerning the International Carriage of Dangerous Goods by Inland Waterway
IMDG = International Maritime Dangerous Goods
IATA = International Air Transport Association
Procedure used to derive the classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]


Classification Justification
Flam. Liq. 2, H225 On basis of test data
Acute Tox. 4, H302 Calculation method
Skin Corr. 1B, H314 Calculation method
Eye Dam. 1, H318 Calculation method
Skin Sens. 1, H317 Calculation method
Repr. 2, H361fd (Fertility and Unborn child) Calculation method
STOT SE 3, H335 Calculation method
STOT RE 2, H373 Calculation method
Aquatic Acute 1, H400 Calculation method
Aquatic Chronic 1, H410 Calculation method
Full text of abbreviated H statements

H225 Highly flammable liquid and vapour.
H226 Flammable liquid and vapour.
H302 Harmful if swallowed.
H304 May be fatal if swallowed and enters airways.
H312 Harmful in contact with skin.
H314 Causes severe skin burns and eye damage.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H319 Causes serious eye irritation.
H330 Fatal if inhaled.
H332 Harmful if inhaled.
H334 May cause allergy or asthma symptoms or breathing difficulties if
inhaled.
H335 May cause respiratory irritation.
H336 May cause drowsiness or dizziness.
H361fd Suspected of damaging fertility. Suspected of damaging the unborn
child.
H373 May cause damage to organs through prolonged or repeated
exposure.
H400 Very toxic to aquatic life.
H410 Very toxic to aquatic life with long lasting effects.
H412 Harmful to aquatic life with long lasting effects.
Full text of classifications [CLP/GHS]
Acute Tox. 2, H330 ACUTE TOXICITY (inhalation) - Category 2
Acute Tox. 4, H302 ACUTE TOXICITY (oral) - Category 4
Acute Tox. 4, H312 ACUTE TOXICITY (dermal) - Category 4
Acute Tox. 4, H332 ACUTE TOXICITY (inhalation) - Category 4
Aquatic Acute 1, H400 SHORT-TERM (ACUTE) AQUATIC HAZARD - Category 1
Aquatic Chronic 1, H410 LONG-TERM (CHRONIC) AQUATIC HAZARD - Category 1
Aquatic Chronic 3, H412 LONG-TERM (CHRONIC) AQUATIC HAZARD - Category 3
Asp. Tox. 1, H304 ASPIRATION HAZARD - Category 1
Eye Dam. 1, H318 SERIOUS EYE DAMAGE/EYE IRRITATION - Category 1
Eye Irrit. 2, H319 SERIOUS EYE DAMAGE/EYE IRRITATION - Category 2
Flam. Liq. 2, H225 FLAMMABLE LIQUIDS - Category 2
Flam. Liq. 3, H226 FLAMMABLE LIQUIDS - Category 3
Repr. 2, H361fd REPRODUCTIVE TOXICITY (Fertility and Unborn child) - Category
2
Resp. Sens. 1, H334 RESPIRATORY SENSITISATION - Category 1
Skin Corr. 1B, H314 SKIN CORROSION/IRRITATION - Category 1B
Skin Irrit. 2, H315 SKIN CORROSION/IRRITATION - Category 2
Skin Sens. 1, H317 SKIN SENSITISATION - Category 1
Skin Sens. 1B, H317 SKIN SENSITISATION - Category 1B


STOT RE 2, H373 SPECIFIC TARGET ORGAN TOXICITY - REPEATED EXPOSURE
- Category 2
STOT SE 3, H335 SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE
(Respiratory tract irritation) - Category 3
STOT SE 3, H336 SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE
(Narcotic effects) - Category 3
History
Date of issue/ Date of : 22 November 2017
revision
Date of previous issue : 31 July 2017
Prepared by : EHS
Version : 21
Disclaimer
The information contained in this data sheet is based on present scientific and technical knowledge. The purpose of this
information is to draw attention to the health and safety aspects concerning the products supplied by us, and to
recommend precautionary measures for the storage and handling of the products. No warranty or guarantee is given in
respect of the properties of the products. No liability can be accepted for any failure to observe the precautionary
measures described in this data sheet or for any misuse of the products.

Sigmacover 410

Uploaded by

Copyright:

Available Formats

Sigmacover 410

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sigmacover 410

Uploaded by

Copyright:

Available Formats

Conforms to Regulation (EC) No.

1907/2006 (REACH), Annex II, as amended by Regulation (EU) United

SAFETY DATA SHEET

SECTION 1: Identification of the substance/mixture and of the company/

1.3 Details of the supplier of the safety data sheet

e-mail address of person : PMC.Safety@PPG.com

1.4 Emergency telephone number

SECTION 2: Hazards identification

English (GB) United Kingdom (UK) 1/20

SECTION 2: Hazards identification

2.2 Label elements

Signal word : Danger

English (GB) United Kingdom (UK) 2/20

SECTION 2: Hazards identification

2.3 Other hazards

SECTION 3: Composition/information on ingredients

English (GB) United Kingdom (UK) 3/20

SECTION 3: Composition/information on ingredients

English (GB) United Kingdom (UK) 4/20

SECTION 4: First aid measures

English (GB) United Kingdom (UK) 5/20

SECTION 5: Firefighting measures

Unsuitable extinguishing : Do not use water jet.

5.2 Special hazards arising from the substance or mixture

5.3 Advice for firefighters

SECTION 6: Accidental release measures

6.3 Methods and material for containment and cleaning up

English (GB) United Kingdom (UK) 6/20

SECTION 6: Accidental release measures

SECTION 7: Handling and storage

7.3 Specific end use(s)

English (GB) United Kingdom (UK) 7/20

SECTION 8: Exposure controls/personal protection

English (GB) United Kingdom (UK) 8/20

SECTION 8: Exposure controls/personal protection

SECTION 8: Exposure controls/personal protection

8.2 Exposure controls

English (GB) United Kingdom (UK) 10/20

SECTION 8: Exposure controls/personal protection

SECTION 9: Physical and chemical properties

English (GB) United Kingdom (UK) 11/20

SECTION 9: Physical and chemical properties

9.2 Other information

SECTION 10: Stability and reactivity

10.2 Chemical stability : The product is stable.

SECTION 11: Toxicological information

English (GB) United Kingdom (UK) 12/20

SECTION 11: Toxicological information

English (GB) United Kingdom (UK) 13/20

SECTION 11: Toxicological information

English (GB) United Kingdom (UK) 14/20

SECTION 11: Toxicological information

Conclusion/Summary : Not available.

SECTION 12: Ecological information

12.2 Persistence and degradability

English (GB) United Kingdom (UK) 15/20

SECTION 12: Ecological information

12.3 Bioaccumulative potential

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment