Tape Wound Current Transformers: 810 Series Measuring and Protection

Tape Wound Current Transformers
810 Series Measuring and Protection
The Crompton 810 Series provides a

comprehensive range of Measuring and
Protective duty ring current transformers
for installation where traditional
reliability, accuracy and quality are
required.
Features
Plain ring, foot mounting
or busbar fixings
Substantial tag terminals
or flexible leads
Measuring Duty ranges
up to 3000A
Protection Duty Classes
5P10 and 10P10
Special designs to
customers requirements
ABS American Bureau of
Shipping Approved
Class X Current Transformers

In balanced earth fault protection systems,
correct operation depends on the accuracy of
the current transformers. Class 5P and 10P
are suitable where the definite minimum
times is greater than 0.2 seconds. For
shorter operating time, transient conditions
may require current transformers to have
cross sectional areas many times greater
than those of steady state faults.
The following information is required.

(a) Turns ratio
(b) Knee point voltage
(c) Maximum excitation current
(d) Secondary circuit resistance
Performance
Designed to highest standards, 810 Series
transformers have accuracy classes, outputs
and performance to IEC 60044-1:1999 for
measuring and protective duties.
Operating voltage:
Test voltage:
System frequency:
Service temperature:
Insulation class:
660V a.c. maximum

2500V a.c.
50/60Hz or 400Hz
-40C to +70C
BS2757 class Y
(Maximum 90C)
Overload withstand to: BS3938 - IEC185
Construction
High grade silicon iron cores are carefully
selected, then insulated and protected by a
polypropylene or polycarbonate covering on
which the secondary winding is toroidally
wound by precision machines. The P.V.A.
coated copper wire is additionally protected
by a layer of half-lapped plasticised P.V.C
tape. A second layer of self bonding P.V.C.
tape is applied and vulcanised to provide a
Code
-940
-941
Plain ring
Flexible
leads
tough moisture-resistant coating.

A substantial terminal block with tag terminal
and M6 screws and nuts is standard but M4
screws or insulated flex leads (normally
600mm) can be supplied. Integral fixing feet
are normally provided but a busbar mount
clamp or a plain ring may be specified.
-942
-943
-944*
-947*
Plain ring
Foot
Foot
Busbar
Busbar
Tag
terminals
Flexible
terminals
Tag
leads
Tag
terminals
Flexible
leads
Style
Mounting
Winding
Termination
* Busbar mounted types - 944 and 947 have bore diameter A reduced by 6mm.
Transformers
38
Web: www.crompton-instruments.com Email: crompton.info@tycoelectronics.com
2002

810 Series Measuring
Measuring Current Transformers
Current Transformers can be manufactured to
meet specific dimensional and accuracy
requirements. All enquiries should be directed
to a local sales centre stating all current,
accuracy and dimensional requirements.
Measuring Current Transformers will be coded

811-94 and Protection Current Transformers
81P-94.
S1 S2
Selection Table
25.4
M6 screws
and nuts
supplied
Accuracies comply with IEC 60044-1:1999

Busbar fixings are not available on Models 812 and 813
* Busbar mounted types 944 and 947 have bore diameter A reduced by 6mm.
D
E
Model Primary
Type Current
A
F
B
Dimensions of standard 5A current

transformers given in mm
1A current transformer dimensions
may vary by up to 10%.
VA at class
1
0.5
Approximate 5 amp Dimensions (mm's)

A*
B
C
D
E
F
Weight
Kgs
812
40
20
60
48
66
40
75
0.48
812
50
2.5
20
60
48
66
40
75
0.48
812
60
2.5
20
60
48
66
40
75
0.48
812
75
20
60
48
66
40
75
0.50
812
80
20
60
48
66
40
75
0.50
814
100
42
84
35
90
52
85
0.50
814
120
2.5
42
84
35
90
52
85
0.55
814
150
7.5
42
84
35
90
52
85
0.55
814
200
10
42
84
35
90
52
85
0.60
814
250
10
42
84
35
90
52
85
0.65
814
300
10
42
84
35
90
52
85
0.70
814
400
20
10
42
84
35
90
52
85
0.75
816
500
20
15
74
112
30
118
66
105
0.65
816
600
20
15
74
112
30
118
66
105
0.70
816
750
20
15
74
112
30
118
66
105
0.70
816
800
30
20
10
74
112
30
118
66
105
0.70
818
1000
40
30
15
98
142
33
148
81
125
0.85
818
1200
50
30
15
98
142
33
148
81
125
0.90
818
1500
50
30
20
98
142
33
148
81
125
1.05
818
1600
50
30
20
98
142
33
148
81
125
1.15
818
2000
60
45
30
98
142
33
148
81
125
1.30
819
2500
60
45
30
114
170
36
176
95
140
1.55
819
3000
60
45
30
114
170
36
176
95
140
1.70
819
4000
60
45
30
110
172
39
178
97
140
2.00
819
5000
60
45
30
110
172
39
178
97
140
2.30
Transformers
2002

810 Series Protection
Selection Table
Accuracies comply with IEC 60044-1:1999 Accuracy Class 5P10
Busbar fixings are not available on Model 81A
S1 S2
Model
Type
Primary
Current
VA
Burden
A*
81A
100
2.5
5
2.5
5
2.5
5
2.5
5
2.5
5
38
38
38
38
38
38
38
38
38
38
140
140
140
140
140
140
140
140
140
140
76
142
54
98
54
76
54
54
32
54
150
150
150
150
150
150
150
150
150
150
78
78
78
78
78
78
78
78
78
78
125
125
125
125
125
125
125
125
125
125
5.4
10.8
3.6
7.2
3.6
5.4
3.6
3.6
1.8
3.6
2.5
5
2.5
5
2.5
5
53
53
53
53
53
53
140
140
140
140
140
140
32
54
32
54
32
54
150
150
150
150
150
150
78
78
78
78
78
78
125
125
125
125
125
125
1.8
3.3
1.9
3.4
2.0
3.5
5
7.5
10
5
7.5
10
5
7.5
10
5
7.5
10
63
63
63
63
63
63
63
63
63
63
63
63
114
114
114
114
114
114
114
114
114
114
114
114
42
66
66
42
66
66
37
42
66
37
42
66
124
124
124
124
124
124
124
124
124
124
124
124
65
65
65
65
65
65
65
65
65
65
65
65
105
105
105
105
105
105
105
105
105
105
105
105
1.4
2.0
2.0
1.4
2.0
2.0
1.3
1.5
2.1
1.4
1.6
2.2
5
7.5
10
5
7.5
10
73
73
73
73
73
73
132
132
132
132
132
132
35
35
57
35
35
57
142
142
142
142
142
142
74
74
74
74
74
74
125
125
125
125
125
125
1.5
1.5
2.5
1.6
1.6
2.6
5
7.5
10
15
5
7.5
10
15
5
7.5
10
15
82
82
82
82
80
80
80
80
78
78
78
78
148
148
148
148
150
150
150
150
152
152
152
152
30
35
47
57
30
35
35
47
30
35
35
47
158
158
158
158
160
160
160
160
162
162
162
162
82
82
82
82
83
83
83
83
84
84
84
84
125
125
125
125
125
125
125
125
125
125
125
125
1.7
2.0
2.6
3.2
1.8
2.1
2.1
2.8
2.1
2.5
2.5
3.2
25.4
150
M6 screws
and nuts
supplied
200
250
300
A
F
81B
400
500
600
81C
750

800

1000
1200
81D
1500
1600
81E
2000
2500
3000
Transformers

B
C
D
E
Weight
Kgs
40
2002

Selection Table (continued)
Accuracies comply with IEC 60044-1:1999 Accuracy Class 10P10
Busbar fixings are not available on Model 81F
S1 S2
Model
Type
Primary
Current
VA
Burden
A*
81F
100
5
7.5
10
57.5
10
5
7.5
10
15
5
7.5
10
15
5
7.5
10
15
32
32
36
32
32
36
32
32
32
36
32
32
32
36
32
32
32
36
102
102
140
102
102
140
102
102
102
140
102
102
102
140
102
102
102
140
93
115
119
61
93
75
56
77
93
97
51
61
83
75
46
61
72
75
112
112
150
112
112
150
112
112
112
150
112
112
112
150
112
112
112
150
59
59
78
59
59
78
59
59
59
78
59
59
59
78
59
59
59
78
105
105
125
105
105
125
105
105
105
125
105
105
105
125
105
105
105
125
3.30
4.50
9.25
2.10
3.35
5.60
1.95
2.80
3.40
7.50
1.75
2.15
3.00
5.70
1.55
2.20
2.65
5.75
5
7.5
10
15
5
7.5
10
15
5
7.5
10
15
47
47
47
51
47
47
47
51
44
44
44
44
100
100
100
140
100
100
100
140
103
103
103
103
56
83
93
75
51
83
88
75
49
59
86
96
110
110
110
150
110
110
110
150
113
113
113
113
58
58
58
78
58
58
58
78
60
60
60
60
105
105
105
125
105
105
105
125
105
105
105
125
1.45
2.25
2.55
5.15
1.35
2.30
2.50
5.15
1.25
1.55
2.35
2.71
5
7.5
10
15
5
7.5
10
15
5
7.5
10
15
58
58
58
58
58
58
58
58
58
58
58
58
115
115
115
115
115
115
115
115
115
115
115
115
44
66
66
93
39
44
66
76
39
44
66
66
125
125
125
125
125
125
125
125
125
125
125
125
66
66
66
66
66
66
66
66
66
66
66
66
105
105
105
105
105
105
105
105
105
105
105
105
1.20
1.95
1.95
2.90
1.10
1.30
2.10
2.45
1.20
1.40
2.20
2.20
5
7.5
10
15
5
7.5
10
15
71
71
71
71
68
68
68
68
131
131
131
131
134
134
134
134
34
34
56
56
37
37
59
59
141
141
141
141
144
144
144
144
74
74
74
74
75
75
75
75
124
125
125
125
125
125
125
125
1.25
1.25
2.30
2.30
1.30
1.30
2.35
2.35
5
7.5
10
15
5
7.5
10
15
5
7.5
10
15
78
78
78
78
78
78
78
78
78
78
78
78
149
149
149
149
149
149
149
149
152
152
152
152
33
38
50
60
33
38
38
50
30
35
35
47
159
159
159
159
159
159
159
159
162
162
162
162
83
83
83
83
83
83
83
83
84
84
84
84
125
125
125
125
125
125
125
125
125
125
125
125
1.35
1.65
2.35
3.00
1.50
1.85
1.85
2.55
2.10
2.50
2.50
3.20
25.4
150
M6 screws
and nuts
supplied
200
D
E
250
A
F
B
300
81G

400
500

600
81H
800
1000
1200
81J
1500
1600
81K
2000A
2500A
3000A
Transformers

B
C
D
E
Weight
Kgs
41
2002

Model 81L Dimensions (mm's)
Fixing feet or Busbar clamps
available on request
* Busbar mounted types 944 and 947 have bore diameter reduced by 6mm.
Accuracy Class 10P10

Model
Type
81L
Transformers
Primary
Current
100
150
200
300
400
500
600
800
1000
1200
1600
2000
2500
3000
VA
Burden
K*
Approximate Dimensions
L
5
5
7.5
10
10
10
10
15
15
15
15
15
15
15
40
40
40
40
61
61
61
81
81
81
94
117
114
114
108
108
108
108
112
112
112
145
145
145
153
163
166
166
90
68
73
68
90
73
73
60
53
45
49
66
59
59
42
2002

Tape Wound Current Transformers: 810 Series Measuring and Protection

Uploaded by

Copyright:

Available Formats

Tape Wound Current Transformers: 810 Series Measuring and Protection

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tape Wound Current Transformers: 810 Series Measuring and Protection

Uploaded by

Copyright:

Available Formats

Tape Wound Current Transformers

810 Series Measuring and Protection

The Crompton 810 Series provides a

Class X Current Transformers

The following information is required.

660V a.c. maximum

Overload withstand to: BS3938 - IEC185

tough moisture-resistant coating.