Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 53 views

    VLM Aire de Planta e Instrumentos

    Uploaded by

    Jorge Rodríguez
    This specification sheet provides details for a flow meter to measure air flow in a pipe. The flow meter will measure air flowing at 1,500 scfm at 125 psi and 113°F. It is a 2" VLM20 model with a stainless steel body to connect to a 6" flanged pipe. It can measure flows between 61.86 to 3,012.57 scfm with a 49:1 turndown ratio and outputs a 4-20mA signal.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    VLM Aire de Planta e Instrumentos

    Uploaded by

    Jorge Rodríguez
    53 views1 page
    This specification sheet provides details for a flow meter to measure air flow in a pipe. The flow meter will measure air flowing at 1,500 scfm at 125 psi and 113°F. It is a 2" VLM20 model with a stainless steel body to connect to a 6" flanged pipe. It can measure flows between 61.86 to 3,012.57 scfm with a 49:1 turndown ratio and outputs a 4-20mA signal.

    Original Description:

    hoja

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This specification sheet provides details for a flow meter to measure air flow in a pipe. The flow meter will measure air flowing at 1,500 scfm at 125 psi and 113°F. It is a 2" VLM20 model with a stainless steel body to connect to a 6" flanged pipe. It can measure flows between 61.86 to 3,012.57 scfm with a 49:1 turndown ratio and outputs a 4-20mA signal.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    53 views1 page

    VLM Aire de Planta e Instrumentos

    Uploaded by

    Jorge Rodríguez
    This specification sheet provides details for a flow meter to measure air flow in a pipe. The flow meter will measure air flowing at 1,500 scfm at 125 psi and 113°F. It is a 2" VLM20 model with a stainless steel body to connect to a 6" flanged pipe. It can measure flows between 61.86 to 3,012.57 scfm with a 49:1 turndown ratio and outputs a 4-20mA signal.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Flow Meter Specification Sheet

    Date 05/02/2019 Quotation Ref - Prepared By Elliot Bustillo


    Sheet - Revision No - Email elliot.bustillo@mx.spiraxsarco.com
    Quantity - AO Number - Telephone -
    Customer - Order Number -
    Project Type - Location -
    Project Name DEMEM Project Ref - Job Name Aire
    PROCESS DATA
    Media Air State Gas
    Mass Flow 3,294.88 kg/h Fluid Density 0.66 lb/ft³
    Volumetric Flow 1,500.00 Scfm Dynamic Viscosity 0.017321 cP
    Inlet Pressure 125.00 psi gauge Reynolds Number 1365223
    Inlet Temperature 113.00 °F Pipe Velocity 4.65 m/s
    NORMAL/STANDARD CONDITIONS
    Pressure 0 psi gauge Temperature 31.999999606664 °F
    PIPE SIZE SELECTION
    Standard Schedule Nominal Size 6" (DN150)
    Designation 40 Internal Diameter 154.05 mm
    PRODUCT
    Product Code - Material Stainless Steel 316L (1.4404)
    PRODUCT VLM20-V-16-S-150-A50-D-DL-1HL-S-P0-S-1Connection Flanged ANSI 150
    Size 2" (DN50) Orientation Horizontal
    Minimum Flow 61.86 Scfm Minimum Velocity 1.88 m/s
    Maximum Flow 3,012.57 Scfm Maximum Velocity 91.44 m/s
    Product Turndown 49:1 Max Differential (Delta P) 3.53 psi
    Actual Turndown Percentage Capacity 49.8 % 78%
    ANCILLARIES
    Downstream Check Valve No Downstream Isolation Valve No
    Upstream Strainer No Separator No
    Upstream Isolation Valve No Separator Trap Set No
    - - >Process Temperature Standard Temperature -40 to 205C (-40 to 400F)
    - - Power Supply 12-36 VDC Loop Powered 1x4-20mA Hart 1xPulse Passive
    - - Output Signal Loop Powered - One 4-20mA, 1 pulse (HART)
    Transducer Model (UTM) - LCD Display Yes
    Transducer Code - Pressure Sensor No
    Bush Kit Code (TFA) - Temperature Sensor Yes
    MESSAGES
    Note – This flow meter is SMALLER than the line size selected. You will need to fit reducers.
    -
    -
    -
    -

    Flow Meter Specification Sheet


    Date 05/02/2019 Quotation Ref - Prepared By Elliot Bustillo
    Sheet - Revision No - Email elliot.bustillo@mx.spiraxsarco.com
    Quantity - AO Number - Telephone -
    Customer - Order Number -
    Project Type - Location -
    Project Name DEMEM Project Ref - Job Name Aire

    You might also like