Revised Scheme of Courses and Syllabi 4 Years (8-Semesters) B.Tech. Degree Programme in Chemical Engineering

Revised Scheme of Courses and Syllabi
4 years (8-Semesters)
B.Tech.
Degree Programme
in
Chemical Engineering
Recommended
for
2006 Batch onwards
DEPARTMENT OF CHEMICAL ENGINEERING

NATIONAL INSTITUTE OF TECHNOLOGY SRINAGAR
JAMMU & KASHMIR-190006 (INDIA)
March – 2008
Department of Chemical Engineering NIT Srinagar
Revised Scheme of Courses for B.Tech. Chemical Engineering
3rd Semester
S. No. Course No. Subjects L T P Credits
1. CHE-301 Introduction to Chemical Engineering 3 1 0 4
2. MTH-301 Complex Variables & Special Functions 2 1 0 3
3. CHM-301 Mechanistic Organic Chemistry 3 1 0 4
4. CHM-302P Mechanistic Organic Chemistry Laboratory 0 0 2 1
5. MTH-302 Engineering Mechanics 2 1 0 3
6. MTH-303P Engineering Mechanics Laboratory 0 0 2 1
7. ELE-305 Electrical Engineering Technology 2 1 0 3
8. ELE-306P Basic Electrical Engineering Laboratory 0 0 2 1
9. MEC-310 Design of Machine Elements 2 1 0 3
10. MEC-311 Workshop Practice 0 0 2 2
14 6 8 25
TOTAL = 14 + 6 + 8 = 28
4th Semester
1. CHE-401 Fluid Mechanics 3 1 0 4
2. CHE-402P Fluid Mechanics Laboratory 0 0 2 1
3. CHE-403 Mass and Energy Balance 3 1 0 4
4. CHE-404 Heat & Power Engineering 3 1 0 4
5. CHE-405P Heat & Power Engineering Laboratory 0 0 2 1
6. HSS-402 Industrial Organization & Management 3 0 0 3
7. MTH-401 Statistics & Probability 3 1 0 4
8. ECE-405 Electronics 2 1 0 3
9. ECE-406P Electronics Laboratory 0 0 2 1
TOTAL = 17 + 5 + 6 = 28 17 5 6 25
5th Semester
1. CHE-501 Mechanical Operations 3 1 0 4
2. CHE--502P Mechanical Operations Laboratory 0 0 2 1
3. CHE-503 Heat Transfer Operations 3 1 0 4
4. CHE-504P Heat Transfer Laboratory 0 0 2 1
5. CHE-505 Chemical Reaction Engineering-I 3 1 0 4
6. CHE-506 Chemical Engineering Thermodynamics 3 1 0 4
7. CHE-507 Material Science & Technology 2 1 0 3
8. CHE-508 Energy Engineering 2 1 0 3
9. CHE-509P Energy Engineering Laboratory 0 0 2 1
TOTAL = 16 + 6 + 6 = 28 16 6 6 25
6th Semester
1. CHE-601 Transport Phenomena 3 1 0 4
2. CHE-602P Transport Phenomena Laboratory 0 0 2 1
3. CHE-603 Chemical Technology – I 3 0 0 3
4. CHE-604 Chemical Reaction Engineering-II 3 1 0 4
5. CHE-605P Chemical Reaction Engineering Laboratory 0 0 2 1
6. CHE-606 Mass Transfer – I 3 1 0 4
7. CHE-607P Mass Transfer Laboratory – I 0 0 2 1
8. CHE-608 Process Equipment Design 2 2 0 4
9. CHE-609 Process Instrumentation 2 1 0 3
TOTAL = 16 + 6 + 6 = 28 16 6 6 25
Recommended for 2006 Batch onwards 1 March - 2008

7rd Semester
1. CHE-701 Pre-project work* 0 0 4 2
2. CHE-702 Seminar 0 2 0 2
3. CHE-703 Chemical Technology – II 3 1 0 4
4. CHE-704 Mass Transfer – II 3 1 0 4
5. CHE-705P Mass Transfer Laboratory – II 0 0 2 1
6. CHE-706 Process Dynamics & Control 2 1 0 3
7. CHE-707P Process Dynamics & Control Laboratory 0 0 2 1
8. CHE-708 Plant Design 3 1 0 4
9. E-1 Elective – I 3 1 0 4
TOTAL = 14 + 7 + 8 = 29 14 7 8 25
* In project work 2 students per group are assumed and loading of 9 hours per week for a group is used
for calculation as per the Guidelines of NPIU for academic reforms (Reference: TEQIP, MHRD, Govt. of
India).
E-1:Any one of the following elective courses

S. No. E-1 Elective courses
1. CHE-709 Polymer Sciences and Engineering
2. CHE-710 Environmental Engineering
3. MTH-701 Operation Research
8th Semester
1. CHE-801 Project* 0 0 9 6
2. CHE-802 Industrial Training & Presentation 0 2 0 2
3. CHE-803 Biochemical Engineering 2 1 0 3
4. CHE-804P Biochemical Engineering Laboratory 0 0 3 2
5. CHE-805 Industrial Economics & Management 2 1 0 3
6. E-2 Elective – II 2 1 0 3
7. E-3 Elective – III 2 1 0 3
8. E-4 Elective – IV 2 1 0 3
TOTAL = 11 + 7 + 15 = 30 11 7 12 25
* In project work 2 students per group are assumed and loading of 9 hours per week for a group is used
for calculation. Although nine hours per week is given but the students are supposed to devote time as
much as possible for the completion of the project.
E-2: Any one of the following electives courses

S.No. E-2 Elective courses
1. CHE-806 Leather Technology
2. CHE-807 Distillation
3. MTH-802 Advanced Statistics for Chemical Engineers
4. CHE-808 Optimization Techniques in Chem. Engineering
E-3: Any one of the following elective courses

1. CHE-809 Instrumental Methods of Analysis
2. CHE-810 Petroleum & Petrochemical Technology
3. CHE-811 Food Technology
E-4: Any one of the following elective courses

1. CHE-812 Entrepreneurship Development
2. CHE-813 Textile Technology
3. MTH-803 Numerical Analysis
4. MTH-804 Design of Experiments

Revised Syllabi for B.Tech. Chemical Engineering

3rd Semester
Introduction to Chemical Engineering
Course No. CHE-301 L T P Credit
3 1 0 4
Chemical engineering and chemical technology. Chemical engineering: Origin, growth and
role in chemical process industries. Chemical Process Industry: Definition, origin, growth and
the present scenario. Problems associated with industrial expansion. Process flow sheeting
and symbols. Concepts of unit processes and unit operations. Systematic analysis of chemical
processes: Need and basic considerations. Chemical engineers, the diversity of employment
opportunities for them. A successful chemical engineer. Professional ethics. Intimate
connections with physico-chemical sciences, biological and biomedical sciences and other
engineering streams: case studies. Concerns of chemical engineering traditional areas:
environment, energy, new materials, bioengineering and biotechnology, food, health and
safety. Concepts of scale-up, modeling and simulation. Dimensional analysis. Computer in
chemical engineering. Future challenges. Nanotechnology. Bioinformatics.
Books Recommended
1. Anderson, L.B., Wenzel, L.A., “Introduction to Chemical Engineering. McGraw-Hill
Book Company, Inc., New York.
2. Thompson, E.V., Ceckler, W.H. “Introduction to Chemical Engineering”, McGraw-
Hill Book Company Ltd. (1977).
3. Peters, M. “Elementary Chemical Engineering”, McGraw-Hill Book Company.
4. Ghosal, S.K., Sanyal, S.K. and Datta, S. “Introduction to Chemical Engineering”,
Tata McGraw-Hill Publishing Company Ltd., New Delhi (1997).
5. Basic Principles of Chem. Engg. By Felder & Rousseou, Edn. 3rd , Prentice Hall
(2002).
Reference Books
1. Rao, M.G., Sittig, M., “Dryden’s Outlines of Chemical Technology, 3rd edn. – For the
21st Century”, East-West Press (1997).
2. Badger, W.A., Banchero, J.T., “Introduction to Chemical Engineering”. McGraw-Hill
Book Company.
3. McCabe, W.I., Smith, J.C., “Unit Operations in Chemical Engineering”. McGraw-
Hill Book Company. (Latest edition)
4. Perry, R.H., Green, D.W., “Perry's Chemical Engineers' Handbook”. McGraw-Hill
Book Company.
Websites:
1. www.google.com
1. http://www.pafko.com/history/h_chem20.pdf
2. http://www.aiche.org/education/abet.htm
3. http://www.che.ufl.edu/www-che/
4. http://www.aiche.org/careers/job.htm
5. http://www.careercornerstone.org/
6. http://www.pafko.com/history/
7. http://web.mit.edu/cheme/

Complex Variables & Special Functions

Course No. MTH-301 L T P Credit
2 1 0 3
Complex Variables:
Analytic functions, Cauchy Riemann equations, Complex integration, Cauchy’s fundamental
theorem, Cauchy’s integral formula, Cauchy’s inequality and Liouville’s theorem on integral
function, Taylor’s and Laurent’s expansions, Zeros and poles of analytic functions, Residues
and Contour integration. Conformal Mappings, Bilinear Transformation.
Special Functions:
Solution in Series, Legendres Functions, Rodriguess formula, generating functions for
Legendres Polynomials and recurrence formulae. Bessel’s functions, Recurrence formulae
and Bessel’s functions of integral order.
Books Recommended
1. Brown, J.V. and Churchill, R.V. “Complex Variables and Applications, 6th Edn.”,
McGraw-Hill, 1996.
2. Copson, E.T. “Theory of Functions of Complex Variables”, Oxford University Press, New
Delhi, 1988.
3. Stanton, R. G. “ Numerical Methods for Science and Engineering”, Prentice-Hall, 1961.
4. Hamming, R.W. “Numerical Methods for Scientists and Engineers”, McGraw-Hill, Inc.,
NY, 1973.
4. Kurtz, M. “Handbook of Applied Mathematics for Engineers and Scientists”, McGraw-
Hill, 1991.
5. Freeman, H. “Finite Differences” Cambridge University Press, 1962.
6. Scarborough, J.B. “Numerical Mathematical Analysis”, Oxford and IBH Publishing Co.,
New Delhi, 1966.
7. Churchill, R.V. “Complex Variables and Application”, McGraw-Hill
International Book Company.
8. Iyengar, S.R.K. and Jain, R.K. “Advanced Engineering Mathematics”, Narosa, 2001.
Mechanistic Organic Chemistry

Course No. CHM-301 L T P Credit
3 1 0 4
Basic Concepts in Mechanistic Organic Chemistry
Electron displacement effects: Inductive, electromeric, mesomeric and hyper conjugative
effects, and their applications. Tautomerism: Keto-enol, triad system and ring chain
tautemerism. Stereoisomerism: Optical isomerism, configuration, chirality, R-S and D-L
nomenclature. Geometrical Isomerism: Cis-trans and E-Z nomenclature. Bond Fission:
Homolysis and heterolysis. Reaction Intermediates: Generation, fate and stability of
carbonations, carbanions, free radicals, carbons.
Substitution and Addition Reactions
Substitution Reactions: Aliphatic nucleophilic substitution reactions, SN1 and SN2
mechanisms and their kinetics. Aromatic electrophilic substitution reactions, orientation in
2nd substitution. Halogenation, nitration, sulphonation, Fidel Crafts reactions, Roemer-
Tiemann reactions.
Addition Reaction: Addition across carbon-carbon doublre bonds, examples halogenation and
hydrohalogenation reactions (Markovnikov’s rule). Addition to carbon-oxygen double bonds,
addition of cyanide ion, bisulphite ion and ammonia derivatives. Aldol condensation,
Cannizaro’s reaction, Perkin’s reaction.

Elimination & Rearrangement Reaction

Mechanism of E1 & E2, stereospecificity and orientation in elimination reactions. Sytzev and
Hoffman elimination. Rearrangement Reactions: Bechmann rearrangement, its
stereospecificity and applications. Hoffmann Wolf and Wanger-Meerwein rearrangement.
Chemistry of Natural Products
Fats and Oils: Definition, occurrence, chemical nature, transesterification, autooxidation,
hydrolysis, hydrogenation, hydrogenolysis, acid value, saponification value, iodine value,
RM value.
Carbohydrates: Definition, classification, identification tests, Molisch test, Tollen’s test,
Fehling’s test, Osazone formation.
Books Recommended
1. Peter, S. “A Guidebook To Mechanism In Organic Chemistry, 6th Edn.”, Longman, 1986.
2. Knipe, A. C. and Watts, W.E. (Eds.), “Organic Reaction Mechanisms”, John Wiley &
Sons Ltd.,2003.
3. Jackson, R.A. “Mechanisms in Organic Reactions”, Royal Society of Chemistry (RSC),
UK, 2005.
4. Jacobs, A. “Understanding Organic Reaction Mechanisms”, Cambridge University Press,
1997.
5. Ahulwalia, V.K. and Prashar, R.K. “Organic Reaction Mechanisms”, CRC Press, 2002.
6. Smith, M.B. and March, J. “March’s Advanced Organic Chemistry: Reaction,
Mechanisms and Structure”, Wiley Interscience, 2001.
7. Handrickson, J.B., Gram, D.J., Hammond, G.S. “Organic Chemistry”, McGraw-Hill,
1970.
Mechanistic Organic Chemistry Laboratory

Course No. CHM-302P L T P Credit
0 0 2 1
Preparation of aspirin. Preparation of acetanilide. Preparation of m-dinitrobenzene.
Determination of acid value of oils. Determination of iodine value of oils. Determination of
saponification value of oils. Preparation of glucose zone. Identification of reducing and non-
reducing sugars. Determination of molecular weight of organic acids. Determination of
number of hydroxyl groups in phenol.
Engineering Mechanics
2 1 0 3
Section -A
Statics
Friction, Centre of Gravity (Determination by integration) C.G. of wire in
form of a plane curve, C.G. of a plane area. Stability of equilibrium, Principle
of virtual work.
Section -B
Dynamics
Simple harmonic motion, Elastic strings, simple Pendulum, Composition of two simple
harmonic motions of the same period in the same straight line.
Two dimensional motions: Tangential and Normal velocities & acceleration. Motion in a
circle, Conical pendulum, Radial and transversal components of velocities and accelerations.
Moment of Inertia of plane figures with respect of an axis in the plane and also with respect
of an axis perpendicular to the plane.

Section – C
Laplace Transforms
Laplace transform, shifting theorem, Laplace transforms of different functions, Heaviside’s
unit function. Dirac Delta function, its Laplace Transforms. Heaviside’s expansion theorem.
Inverse Laplace transforms. Initial and Final value theorems, convolution theorem and it
application, use of Laplace transforms in the solution of linear differential equations.
Book Recommended:
1. Gupta, S.R. “Statics”, S. Chand and Company latest edition.
2. Gupta, S.R. “Dynamics” S. Chand and Company latest edition.
3. Spiegel, M.R., “Schaum's Outline of Theory and Problems of Laplace Transforms”,
Schaum's Outline Series. McGraw-Hill, New York, 1965.
4. Mickley, H.S., Sherwood, T.K. and Reed, C.E., “Applied Mathematics in Chemical
Engineering”, McGraw-Hill, 1957.
5. Varma, A. and Morbidelli, M., “Mathematical Methods in Chemical Engineering”,
Oxford University Press, 1997.
6. Kreyzig, E. “Advanced Engineering Mathematics” Wiley Eastern.
Engineering Mechanics Laboratory

Course No. MTH-303P L T P Credit
0 0 2 1
1. To determine the force to maintain a rolling body in equilibrium on an inclined plane and
to verify its relationship to weight of the body.
2. To determine modulus of rigidity of the material of a helical spring.
3. To determine the acceleration due to gravity using Flatcher’s Fletchers Trolley Apparatus.
4. To verify the forces in various members of shear legs apparatus.
5. To find the moment of inertia of a flying wheel.
6. To verify the principle of moments with the help of a compound lever apparatus.
7. To verify the parallelogram law of forces with the help of Gravisand’s apparatus.
8. To find the value of ‘g’ with the help of Atwood machine.
9. To verify polygon law of forces with help of universe table force table
10. To verify Lami’s Theorem with the help of Universal Force Table
Electrical Engineering Technology

Course No. ELE-305 L T P Credit
2 1 0 3
Network Analysis and Theorems: Basic circuit theory, resistance, inductance and
capacitance, Ohm’s law, KCL, KVL, power and energy relations, superposition theorem,
Thevenin’s theorem, Nortan’s theorem, maximum power transfer theorem.
Sinusoidally Excited Circuits: Basic definition of A.C. circuits, Phasor algebra and complex
number representation, solution of sinusoidally excited R, L, C circuits.
Three-Phase Circuits: The concept of 3-phase voltage, current and voltage relations in Y and
∆ circuits, and basic characteristics of three phase circuits.
D.C. Generators and Motors: Construction, principles of operation, types of D.C. generators
and motors, and their applications.
Three-Phase Alternators: Construction, principles of operation, phase diagrammes, voltage
regulation, types and application.
Synchronous Motors: Principle of operation, synchronous capacitors, application.
Induction Motors: Types, construction, principle of operation, characteristic and application.
Electric Arc Furnace and its Accessories.
Books Recommended:
1. Toro, V.D. “Principles of Electric Engineering”, Prentice-Hall, Englewood Cliffs.
2. Toro, V.D. “Electrical Engineering Fundamentals”, Prentice-Hall of India.
3. Fitzgerald, A. E., Kingsley, C. J. and Umans, S.D., “Electric Machines, 6th edn.”,
McGraw-Hill, 2003.
4. Sharma & Maulukutla, “Electric Machines, 2nd edn.”, West Publishing Company, 1994.
5. Nagarath, I.J. and Kothari, D.P., “Electric Machines” Tata McGraw-Hill Company, New
Delhi, 2001.
4. Taylor, E.O., “Utilization of Electric Energy” , Pitman & Sons.
Basic Electrical Engineering Laboratory

Course No. ELE-306P L T P Credit
0 0 2 1
1. Verification of KCL & KVL and hence determination of a equivalent resistance of
parallel circuit.
2. Verification of superposition theorem.
3. Verification of Thevenin’s theorem.
4. Obtaining resonance in RLC circuits.
6. Measurement of power and power factor of a three-phase load.
7. To study the constructional details of single-phase transformer.
8. To study the constructional details of D.C. machines.
Design of Machine Elements

Course No. MEC-310 L T P Credit
2 1 0 3
Working stresses and design considerations.
Design of following machine elements:
(i) Riveted joints (ii) Bolts, nuts and screws (iii) Cotter and Kuckle joints (iv) Shafts and
keys (v) Helical springs (vi) Welded connections (vii) Spur gears (viii) Flywheels (ix)
Belts and pulleys (x) Bearings (xi) Coupling
Workshop Practices
Course No. MEC-311 L T P Credit
0 0 2 2
Pattern Making
Introduction of tools used in pattern making. Shring rules, their classification and use. Types
of patterns and their method of construction. Practice to prepare a pattern of open bearing
blocks.
Foundry
Detailed study in foundry process, description of foundry tools. Preparation of two part
pattern mould. Moulding of self cored pattern and its casting. Skelton pattern mould.
Machine Shop
Introduction of trade and tools, detailed description and operations of lathe and drilling
machines. Demonstration in setting up of tool angles. Lathe practice in plain, step and taper
turning. Demonstration of milling machine operations and different milling cutters.
Welding
Introduction of welding process, fuse welding compound, and electrodes. Oxyacetylene
electric arc metal cutting. Practice in fitted and corner joints.
4th Semester
Fluid Mechanics
3 1 0 4
Introduction: Units and dimensions, fluid properties, concepts of consecutive relations,
Newtonian and non-Newtonian fluids.
Fluid Statistics: Fluid forces and pressure measurement. Dimensional analysis and similitude.
Kinematics of flow, velocity fields, streamline etc. Stream function, potential function,
rotational and irrotational flows. Laminar and turbulent flows. Flow in pipes, frictional losses
in pipes, equation of continuity, equation of motion. Eulers’ equation. Bernoulli’s theorem
and its application to blowers, pumps, compressors and turbines. Flow past immersed body,
drag and fluidized bed. Flow measuring instruments, pitot tube, orifice, venturimeter, wet gas
meter, notches, pumps and compressors. Characteristics, applications and specifications of
pumps, blowers, compressors and turbines. Navier-Stokes equation.
Books Recommended
1. Shames, J.H., “Mechanics of Fluid”, McGraw-Hill. 1992.
2. Darby, R., “Chemical Engineering Fluid Mechanics”, Marcel Dekker, 1996.
3. Wilkes, J.O., “Fluid Mechanics for Chemical Engineers”, Prentice-Hall International
Series, 1998.
4. Streeter, V.L., “Fluid Mechanics” McGraw-Hill, 1985.
5. Streeter, V.L., Wylie E.B. and Bedford, K.W. “Fluid Mechanics, 9th Edn.”, McGraw-Hill
Book Company, New York, 1998.
6. Seshadri, C.V. and Patankar, S.V., “Elements of Fluid Mechanics”, Prentice Hall of India
Ltd., 1971.
7. Coulson, J.M. and Richardson, J.F., “Chemical Engineering, Vol. I & II”, Pergamon
Press, Oxford, 1991.
8. Mc Cabe, W.L., Smith, J.C. and Harriott, P., “Unit Operation of Chemical Engineering”,
McGraw-Hill, 2004.
Fluid Mechanics Laboratory

Course No. CHE-402P L T P Credit
0 0 2 1
1. Calibration of flow meters for gas and liquid.
2. Reynold’s experiment. Study of pipe fitting, mechanical features of pumps, blowers and
compressors.
3. Flow through network of pipes and pipe fittings.
4. Stokes law verification.
5. Flow through helical coils.
6. Verification of Bernoulli’s theorem.
7. Study of reciprocating and centrifugal pump test rigs.
Mass and Energy Balance

3 1 0 4
Mathematical principles, significant figures and rounding off. Graphical and numerical
methods of data fitting. Solutions of equations by trial and error, and interaction techniques.
Units and dimensions: Basic and derived units, dimensional and empirical equation. Different
ways of expressing units of quantities and physical constants. Properties of gases, liquids and
solids: ideal and real gas laws, critical properties, properties of mixtures and solutions, and
phase equilibria. Mass Balance: Concepts of limiting and excess reactants, tie element,
recycle, purging, bypass etc., in batch, stage-wise and continuous operations in systems with
and without chemical reactions, and in unit operations. Energy Balance: Concepts,
calculation of enthalpy changes for systems with and without reactions. Thermo Chemistry:
Heats of formation, combustion, solution, dilution etc. and the effects of pressure and
temperature on them. Material and energy balance for nuclear, electrochemical,
photochemical and biochemical processes. Material and energy balance for non-conventional
separation processes.
Books Recommended
1. Hougen, O.A., Watson, K.M., Ragatz, R.A., “Chemical Process Principles, Part I”, John
Wiley & Sons, 1970.
2. Williams, E.J., Johnson, R.C., “Stoichiometry for Chemical Engineers”, McGraw-Hill,
3. Himmelblau, D.M., “Basic Principles and Calculations in Chemical Engineering, 6th
Edn.”, Prentice-Hall of India Ltd. ,2002.
4. Anderson, L.B., Wenzel, L.A., “Introduction to Chemical Engineering”, McGraw-Hill
Book Company, Inc., 1961.
Heat and Power Engineering

3 1 0 4
Various laws governing the behavior of a perfect gas, 1st law of thermodynamics, 2nd law of
thermodynamics. Reversible and irreversible processes. Entropy and its significance.
Enthalpy. Expansion and compression of gases.
Air Cycle
Carnot cycle reversibility, ideal thermal efficiency. Otto cycle, representation on P-S
diagram, assumptions, and expression for the air standards efficiency. Diesel cycle,
representation on P-S diagram, assumptions, and expression for the air standards efficiency.
I.C. engines, classification, 2-stroke and 4-stroke cycles. Mean effective pressure, I.H.P.,
P.H.P., F.H.P. and mechanical efficiency.
Fuel consumption, lubrication and cooling of I.C. engines. Properties of steam, theory of
steam table and charts.
Steam boilers, classification and elementary constructional details, types of boilers, selection
of boilers, safety valves, level indicators, pressure gauges etc., performance of boilers.
Steam engines, classification, working, hypothetical indicator diagram factor, mean effective
pressure, compounding of engines. Horse power, pressure developed performance of steam
engine.
Fuels turbines classification – their consumption, air requirements; classification, degree of
reaction, H.P. developed and efficiency.
Heat and Power Engineering Laboratory

0 0 2 1
1. Study of 2-stroke petrol, 4-stroke petrol and diesel engines.
2. Working model of 4-stroke petrol engine.
3. Boiler trial, heat balance and efficiency of a boiler.
4. Study of various types of boiler.
5. Determination of quality of steam.

Industrial Organization and Management

Course No. HSS-402 L T P Credit
3 0 0 3
Management: It’s nature, purpose and definition, management as a pre-requisite for any
organization, aims of management, management-art of science.
Functions of Managers: Planning, organizing, actuating and controlling.
Planning: Nature and purpose of planning, types of plans, steps in planning/planning process.
Objectives: The nature and importance of objectives, types of objectives, primary, secondary,
individual and personal objectives. Guidelines for setting objectives.
Decision Making: Importance and limitations of rational decision making, types of decisions,
programmed and non-programmed decisions, process of decision making under certainty.
Organizing: Nature and process of organizing, steps in organizing/process of organizing,
formal and informal organization, span of control, and factors determining effective span.
Decentralization of Authority: The nature of decentralization, degrees of decentralization,
decentralization, philosophy and policy.
Delegation of Authority: Meaning of authority/delegation, steps in the process of delegation,
factors determining the degree of delegation, art of delegation.
Line/Staff Organization: Line organization, staff organization, line and staff organization,
functional and committee organization, the nature of line and staff relationship.
Actuating: Nature and purpose of actuating, steps in actuating/actuating process.
Human Resource Management: Importance of human resource planning, recruitment,
selection, training and development, performance appraisal, compensation, packages,
promotions, transfers, demotion and separation etc.
Leadership: Meaning and importance leadership qualities, effective and ineffective leaders,
leadership styles.
Motivation: Need, want and satisfaction chain. Need hierarchy. Improving employee
motivation.
Communication: Meaning and importance of effective communication, communication
process, formal and informal communication.
Controlling: Nature and purpose of controlling, steps in controlling/process of controlling,
types of controls, requirement of effective controls.
Management Infirmation System (MIS): Definition, elements and importance of MIS,
manager, management and information, changing MIS environment, managing and
controlling the MIS function.
New Trends in Management.
Books Recommended:
1. Principles of Management by George R. Terry.
2. Industrial Organization and Management by Tara Chand.
3. Business Organization Management by M.C. Shukla.
4. Management Economics by Dean, J.
Statistics and Probability

3 1 0 4
Statistics and Probability
Measures of central tendency and measures of variations (dispersions), moments, measures of
skewness and kurtosis. Random experiment, sample space, events, classical statistical and
axiomatic definitions of probability. Statements and proof of theorems on addition and
multiplication of probabilities. Simple problems. Baye’s theorem on conditional probability.
Random variables, derivation of formulae for mean, variance and moments of random

variables for discrete and continuous cases. Laws of expectation, binomial, Poisson and
normal distributions, beta and gamma distribution. t-distribution, F-distribution, Chi-square
distribution and their applications. Method of least squares, fitting a straight line and parabola
of degree ‘p’. Regression and correlation. Multiple and partial correlation.
Books Recommended
1. Gupta, S.C. and Kapoor, V.K. “Fundamentals of Mathematical Statistics” , Sultan Chand
& Sons, New Delhi, Latest edition.
2. Brownlee, “Statistical Theory and Methodology in Science and Engineering”, John Wiley
and Sons.
3. Walpole, R.E. “Introduction to Mathematical Statistics, 3rd Edn.”, Macmillan Publication,
New York.
4. Meyer, “Data Analysis for Scientists and Engineers”, John Wiley and Sons.
Electronics
Course No. ECE-405 L T P Credit
2 1 0 3
Construction symbols, characteristics and application of semiconductor diodes transistors and
silicon controlled rectifiers, amplifiers, cathode ray oscilloscope and its applications,
amplitude modulation and detection.
Books Recommende:
1. Integrated Electronics by Millman and Halkias.
2. Electronic Measurement by Cooper.
3. Pulse, Digital and Switching Circuits by Millnab and Taub.
Electronics Laboratory
Course No. ECE-406P L T P Credit
0 0 2 1
1. Study of CRO, measurement of voltage frequency and phase of given wave form. Diode
and Zener diode characteristics.
2. To obtain diode characteristics,
3. (a) To assemble a half wave and full wave rectifier and to study their performance.
(b) To suppress the triple using RC filter.
4. To use Zener diode as a voltage regulator.
5. To obtain transistor characteristics in following configuration.
6. Common emitter,
7. To assemble a CE amplifier and observe its performance.

5th Semester
Mechanical Operations
3 1 0 4
Settling: Free and hindered settling, classification of classifiers (simple and mechanical),
introduction to the design of continuous thickeners.
Filtration: Classification of filters, effect of pressure on filtration, filter aids, constant pressure
and constant rate filtration theory, membrane filtration.
Mixing: Theory of mixing, power consumption of mixer impellers, mixing liquids with
liquids, mixing gas with liquid, mixing of viscous masses, mixing of solids with solids
mixing of solid with liquid.
Size Separation: Principle of screening, screen analysis, types of screening equipments
(grizzlies, trommels, shaking and vibrating screens), effectiveness of a screen, air separating
method (cyclone separator, bag filters, electrostatic precipitator, scrubbers).
Crushing and Grinding: Classification of crushing and grinding machinery, coarse crusher,
jaw crusher, gravity crushers, intermediate crushers (roll, disc or cone crusher, edge runners,
squired cage disintegrator, hammer mill), fine grinders-burhstones, roller mills, ball and tube
mills. Theory of Crushing. Laws of crushing-Rittingers’ law, Kick’s law. Storage and
transportation of bulk solids (types of conveyers, their selection)
Books Recommended
1. McCabe, W.I. Smith, J.C., Unit Operations in Chemical Engineering, McGraw Hill.
2. Badger, L.W. Banchero, T.J., Introduction to Chemical Engineering, McGraw Hill.
Reference Books
1. Coulson, J.M. Richardson, J.F., “Chem. Engineering, 2nd Vol.”, Butterworth-Heinemann.
2. Foust et al. “Principles of Unit Operation”, 2nd ed., Wiley and Sons.
3. Perry, R.H. Green, D.W., “Perry's Chemical Engineers' Handbook 7th ed.”, McGraw Hill
Book Company.
4. Brown et al. “Unit Operations”, John Wiley & Sons.
Mechanical Operations Laboratory

0 0 2 1
Study of sedimentation, cyclone separator, ball mill, leaf filter, plate and frame filter, ribbon
mixer, belt conveyor, screw conveyor, trommel, vibrating screen, elutriator; sieve analysis;
Verification of grinding laws. Determination of specific surface and particle population of a
crushed material.
Heat Transfer Operations

3 1 0 4
Introduction: Modes of heat transfer and basic equations, study of unsteady states,
dimensional analysis.
Conduction: Thermal conductivity of material. Steady state conduction through flat wall,
multi-layer wall, cylinders and hollow spheres. Lagging of pipes and optimum lagging
thickness.
Convection: Natural and forced convection. Laminar and turbulent flow heat transfer inside
and outside tubes. Individual and overall heat transfer coefficients, fouling, individual
factors. Extended surfaces. Condensation film types and drop-wise. Heat transfer of
boiling liquids. Analogies.
Radiation: Emissivity, absorptivity, black body and grey body radiation, view factors,
radiation between various types of surfaces.
Evaporation: Energy and material balance. Single & multiple effects evaporators and their
accessories. Design of evaporators.
Heat Exchangers: Design principles, examples. Codes in heat exchanger design.
Books Recommended
1. McCabe, W.L., Smith, J.C., “Unit Operation of Chemical Engineering”, McGraw-Hill.
2. McAdams, W.H., “Heat Transmission”, McGraw- Hill.
3. Knudsen, J.G., Katz, D.L., “Fluid Dynamics and Heat Transfer”, McGraw-Hill.
4. Coulson, J. M., Richardson, F., “Chemical Engineering, Vol. I”, Butterworth-Heinemann.
5. Kern, D.Q., “Process Heat Transfer”, McGraw- Hill.
6. Wetly, J.R., Wicks, G.E., Wilson, R.E., “Momentum Heat and Power Engg”,……………
Heat Transfer Laboratory

0 0 2 1
1. Study of heat transfer through composite walls.
2. Study of heat transfer in natural convection.
3. Study of heat transfer in forced convection.
4. Study of heat transfer coefficient in filmwise and dropwise condensations.
5. Study of heat transfer coefficient in double pipe heat exchanger (Liquid-liquid flow).
6. Study of heat transfer coefficient in double pipe heat exchanger (Gas-liquid flow).
7. Study of heat transfer coefficient in shell and tube type heat exchanger.
8. Study of heat transfer in finned-tube heat exchanger.
9. To test the performance of the single effect short tube vertical evaporator with sucrose
solution.
Chemical Reaction Engineering – I

3 1 0 4
Introduction to Chemical Kinetics: Thermodynamics and chemical kinetics, classification of
reactions, elementary and non-elementary reactions, molecularity and order of reactions,
reaction mechanisms and kinetics for non-elementary reactions, temperature dependency of
rate constant and activation energy.
Interpretation of Batch Reactor Data: Determination of kinetic expressions for constant
volume and variable volume batch reaction systems; integral and differential methods for
data analysis; catalytic, autocatalytic, reversible and irreversible reactions of zero order, first
order, second order and nth order.
Introduction to Reactor Design: Ideal-batch, -steady state mixed flow and -plug flow reaction
systems.
Design of Single Reactions: Size comparison of single reactors, recycle reactor, autocatalytic
reactions. Design of multiple reactions: parallel reactions, reactions in series (irreversible).
Temperature and pressure effects. Choosing the right kind of reactors. Basics of non-ideal
flow.
Text Books
1. Levenspiel, O., “Chemical Reaction Engineering, 3rd ed.”, John Wiley & Sons (1995).

2. Fogler, H.S., “Elements of Chemical Reaction Engineering, 2nd ed.”, Prentice-Hall of

India Pvt. Ltd. (1995).
3. Smith, J.M. “Chemical Engineering Kinetics”, McGraw-Hill Book Company, New
York (1981).
Reference Books
1. Metcalfe, I.S. “Chemical Reaction Engineering – A First Course”, Oxford Science
Publications, 1997.
2. Perry, R.H., Green, D.W., “Perry's Chemical Engineers' Handbook”. McGraw-Hill
Book Company, New York (Latest edn.).
.
Chemical Engineering Thermodynamics

3 1 0 4
Introduction: The first law of thermodynamics, formulation of the first law of
thermodynamics, thermodynamic state, state function, enthalpy, the steady state flow
process, flow calorimeter, equilibrium; ideal gas isometric, isobaric, isothermal, adiabatic
and polytropic processes. P.V.T.
Relationships of Fluids: Equation of a state for gases, Vander Walls equation Bennedict-
webb Rubin equation, Rodilich and Kwong equation, compressibility factor,
compressibility chart, experimental compressibility data, mixtures of ideal gases, Dalton’s
law of additive pressures, Amagats law of additive volumes, the pseudo critical point
method, behaviour of liquids.
Heat Effects: Heat capacity of gases as a function of Temperature, heat effects
accompanying phase changes, Trouton’s rule, Kistiakosky relation, standard heat of
reaction, standard heat of formation, the standard heat of combustion, effect of temperature
on the standard heats of reaction, heat effects in chemical reaction.
The Second Law of Thermodynamics: Statement of 2nd Law, the heat engine absolute
temperature scale, concept of entropy, mathematical statement of the 2nd Law, entropy
changes and irreversibility.
Thermodynamic Properties of Fluids: Relationships among the thermodynamic
properties of single phase systems, table of thermodynamic of gases.
Thermodynamics of Flow Processes: Compressible fluids, compressors and ejectors.
Phase Equillibria: Critical, fugacity, composition of phases in equillibria, fugacity of
pure components, fugacity charts, effects of temperature on fugity, the Gibb’s-Duhem
Equation in terms of activity coefficients for two component system, relating activity
coefficient with composition, theoretical calculation of activity coefficient, relation for
excess free energy, thermodynamic consistency tests, Margule and Van-laar equation,
various methods to calculate Van-Laar and Margule’s constants.
Chemical Reaction Equilibrium: Criteria, the standard free energy change and equilibrium
constants, the effect of temperature.
Book Recommended
1. Smith, J.M., Venness, H.C., “Introduction to Chemical Engineering Thermodynamics”,
McGraw-Hill Book Company.
Reference Book
1. Modell, M., Ried, R.C., “Thermodynamics and its Applications”, Prentice-Hall India Ltd.
2. Y.V. Chalpati Rao, “Chemical Engineering Thermodynamics”,

Material Science & Technology

2 1 0 3
Introduction to the subject. Properties of materials of importance to chemical equipment.
Materials of construction for chemical industries (metallic and non-metallic). Principles of
usage of materials.
PCC, BCC, HCC crystal planes. Microscopic and macroscopic structure of metallic
crystals. Imperfection in crystals: Point imperfection, line imperfection and surface
imperfection. Single phase metals, properties of single phase metals. Plastic
deformation, re-crystallization. Plastic deformation of metal crystals, properties of
plastically deformed metals, mechanism of slip.
Failure of Metals: Creep, mechanized creep, ductile fracture, cleavage fracture, fracture in
glass and theory of fracture, fatigue and mechanism of fatigue.
Iron-Carbon Alloys: Definition of alloys, substitutional and interstitial solid
solutions, eutectic and eutectoid reactions, peritectic transformation, peritectic and pertectoid
reaction , constituent diagram for iron-carbon system, time-temperature-transformation
curves.
Inorganic Materials: Ceramic, example of ceramic phases. Structure of silicates. Dielectric
ceramic semiconductors. Mechanical behaviour of ceramic materials.
Corrosion: Corrosion by solution, electrochemical oxidation. Electrode potential, galvanic
couples. Types of galvanic cells. Corrosion prevention. Protective surfaces, avoidance
of galvanic couples, use of galvanic protection. Use of organic, inorganic and metallic
linings.
Polymers: Structure, deformation, plastic deformation.
Electrical conductivity: definition, insulators and semi-conductors, intrinsic and
extrinsic semiconductors. Magnetic behaviour of metals. Introduction to ferromagnetism.
Books Recommended
1. Material Science by Vanclak
2. Material Science and Technology by Nanda, J.N., Sanya, B.
Energy Engineering
2 1 0 3
Survey of different sources of energy and their utilization. Natural fuels-coal, petroleum,
processed fuels, coke, water gas, producer gas, refinery gas-LPG, synthetic petroleum,
bio-gas, nuclear fuels, biodegradable material (Gobar Gas). Non-conventional sources of
energy: energy from biomass, geothermal energy, energy from high velocity winds and high
pressure gases, solar energy. Combustion calculation of coal and petroleum fractions.
Design of burner, stackers and furnaces. Recovery of waste heat from chemical and
metallurgical processes, selection of suitable energy sources. Definition and objectives of
energy management. Energy management strategy. Energy audit , types and methodology.
Introduction of pinch technology. Nanotech.
Books
1. “Solar Energy-Thermal Processes” by Duffia and Beckman.
2. “Principles of Desalination” by Speigler.
3. “Fuels, Combustion and Furnaces” by Griswold, J.
4. “The Elements of Fuel Technology” by Himus, G.W.
5. “ Nuclear Chemical Engineering” by Beredict, M., Pigford, T.M.

6. Khadi Grammodyog Commission Report on Gobar Gas Plant.

7. “Fuel and Combustion” by Sarkar, S.
8. “India, The Energy Sector” by Handerson World Bank.
9. C. Kashkare, Energy-Resources, Demand and Conservation with Special reference to
India, Tata-McGraw Hill.
Energy Engineering Laboratory

0 0 2 1
1. Ultimate and proximate analysis of coal and other solid fuels.
2. Determination of calorific value of solid and liquid fuels.
3. Test for cloud and pour point of petroleum products.
4. Determination of flash point, fire point and specific gravity of petroleum products.
5. Determination of sulfur content in coal.
6. Determination of flue gas composition by Orsat’s apparatus.

th
6 Semester
Transport Phenomena
3 1 0 4
Introduction: Kinetic theory of transport properties. Summary of vector and tensor. Internal
theorems for vectors and tensors. Curvilinear coordinates. Vector and tensor components in
curvilinear coordinates. Kinetic theory explanation of transport phenomena and prediction
of the transport properties.
Momentum Transport: Viscosity, Newton’s law of viscosity, viscosity of gases and liquids.
Momentum flux, momentum balance in a falling and circular tube. Equations of motion and
continuity, turbulent flow and macroscopic balances.
Energy Transport: Thermal conductivity and Fourier’s law. Thermal conductivity and its
dependence upon temperature and pressure. Thermal conductivity of pure gases, gases at
law density, and liquids energy balance. Unsteady state conduction. Natural and forced
convection and macroscopic balances for non-isothermal systems.
Mass Transport: Diffusivity and Fick’s law of diffusion. Diffusion in gases and liquids,
shell mass balances, equation of change for multi-component systems.
Analogies between momentum, energy and mass transport and their importance.
Books Recommended
1. Bird, R.B., Stewart, W.D and Lightfoot, E.W., “Transport Phenomena” John Wiley &
Sons.
Reference Books
1. Roshenhow, W.M. and Harry Choi, “Heat, Mass & Momentum Transfer”, Prentice Hall,
Inc.
2. Whitaker, Steghen, “Introduction to fluid Mechanics”, Prentice Hall.
3. Benner, C.O., Myers, J.E., “Momentum Heat and Mass Transfer”, Tata McGraw-Hill.
4. Hirschfelder, et. al., “Molecular Theory of Gases and Liquids”, John Wiley & Sons.
5. Wetly, J.R. Wicks, C.E., Wilson, R.E., “Momentum, Heat and Mass Transfer” John
Wiley & Sons.
5. Crossby, E.J., “Experiments in Transport Phenomena”, Wiley.
Transport Phenomena Laboratory

0 0 2 1
1. To verify derived equations for time of efflux in rectangular cylindrical and spherical
tanks.
2. To determine velocity profile in fluid flowing through a circular duct.
3. To determine thermal conductivity of a solid material.
4. To determine non-Newtonian fluid viscosity by Hoppler’s ball viscometer.
Chemical Technology – I
3 0 0 3
Technology of Water: Classification of water, industrial and municipal purposes, methods for
obtaining fresh water from sea water.

Basic Chemical Industries: Common salt, its uses, economics and manufacture. Soda ash, its
uses, raw materials, manufacture by Solvay process and its modification. Caustic soda-
chlorine types of cells, raw materials, reactions, uses and manufacture.
Bleaching Powder and Hypochlorites: The methods of production.
Sulphuric acid: Raw materials, method of manufacture by contact process.
Synthetic ammonia: Uses, reactions, manufacturing process, concentration of nitric acid.
Nitrogenous Fertilizers: Ammonium sulphate, ammonium nitrate and urea, their methods of
production.
Phosphate Industries: Phosphorous, uses and manufacture; phosphoric acid, uses and types of
manufacturing procedures; phosphatic fertilizers, raw materials and uses. Manufacture of
super-phosphates, granular super phosphate and triple super-phosphate.
Cement: History, various types of cements, raw materials, manufacture of Portland cement.
Glass: history, uses and composition of glass; different types of glasses, unit operation and
processes in the glass manufacture.
Ceramics: Uses, basic raw materials, unit processes in ceramic industry.
Porcelain: Manufacturing procedure.
Enamels: Raw metals, preparation of metal paint, application of enamel and firing.
Books Recommended
1. Rao, M.G., Sittig, M., “Dryden’s Outlines of Chemical Technology for the 21st Century”,
East-West Press, (1997).
2. Austin, G.T., “Shreve’s Chemical Process Industries”, McGraw-Hill Book Company,
(1984).
Chemical Reaction Engineering – II

3 1 0 4
Introduction of heterogeneous reactions. Solid-catalysed reactions: Property of catalysis,
pore diffusion resistance combined with surface kinetics, porous catalyst particles, heat
effects during reaction, performance equation for reactors containing porous particles,
experimental methods for finding rates. Non-catalytic heterogeneous reactions: Fluid-fluid
reaction kinetics, fluid-fluid reactions design, fluid-particles reactions kinetics, fluid particle
reaction design. Fluidized Bed and Packed Bed Catalytic Reactors: Design and performance
equations. Biochemical Reaction Systems: Enzyme fermentation, microbial fermentation,
substrate limiting microbial fermentation, product limiting microbial fermentation.
Text Books
1. Levenspiel, O., “Chemical Reaction Engineering”. John Wiley & Sons, New York
(1995).
2. Fogler, H.S., “Elements of Chemical Reaction Engineering”. Prentice-Hall of India
Pvt. Ltd. (1995).
3. Smith, J.M. “Chemical Engineering Kinetics”. McGraw-Hill Book Company, New
York (1981).
Reference Books
1. Palmer, T., “Understanding Enzymes”, Ellis Horwood Limited, Halsted Press, a
division of John Wiley & Sons (1985).
2. Shuler, M., Kargi, F., “Bioprocess Engineering, Basic Concept, 2nd Edn.”, Prentice Hall
PTR (2004).
3. Bailey, J.E., Ollis, D.F., “Biochemical Engg. Fundamentals, 2nd edn.”, McGraw-Hill,
1985.

Other References
1. Levenspiel, O., The Monod equation: a revisit and a generalization to product
inhibition situation. Biotech. Bioeng. 22, 1671-1687 (1980).
2. Khan, N. S., Mishra, I. M., Singh, R. P., Prasad, B., “Modeling the growth of
Corynebacterium glutamicum under product inhibition in L-glutamic acid
fermentation”. Biochem. Eng. J. 25, 173-178 (2005).
Chemical Reaction Engineering Laboratory

0 0 2 1
1. Determination of order of reaction (Homogenous system).
2. Determination of order of reaction (Heterogeneous system).
3. Determination of rate of reaction of a first order reaction.
4. Determination of rate of reaction of a second order reaction.
5. Determination of equilibrium conversion.
Mass Transfer – I
3 1 0 4
Principles of mass transfer, unsteady state and steady state.
Diffusion: Molecular diffusion in fluids, diffusivities of fluids, applications of molecular
diffusion-analogies and mass transfer coefficients in laminar flow, concepts, of effective
diffusivity.
Eddy diffusion, mass transfer in turbulent flow, models of mass transfer analogies.
Interphase mass transfer-diffusion between phases, two phases mass transfer coefficients,
individual and overall coefficients, stage wise process. Concurrent and counter current
processes.
Gas Absorption: Equilibrium relationships. Material balances for cocurrent and counter
current multistage equipment. Dilute system. HETP, HTU and NTU individual and overall
coefficients.
Equipment: General characteristics of tray towers, efficiencies, wetted wall towers,
packed towers, characteristics of packed towers, mass transfer coefficients in packed
towers.
Humidification: General theory, psychometric chart, fundamental concepts in humidification
and dehumidification. Cooling towers and related equipment.
Crystallization: Principles, calculation of yield, heat effect and equipment.
Drying: Equilibria, drying rate curve definitions. Batch and continues drying. Mechanism of
drying. Calculation of batch and continuous drying.
Books Recommended
1. Treybal, R.E., “Mass Transfer Operations”, McGraw-Hill Book Company.
2. Badger, W.L., Banchero, J.T., “Introduction to Chemical Engineering”, McGraw-Hill
Book Company.
3. McCabe, W.L., Smith, J.C., Harriott, P., “Unit Operations of Chemical Engineering”,

Mass Transfer Laboratory – I

0 0 2 1
1. Diffusion coefficients measurements.
2. Concentration profile.
3. Wetted wall column.
4. Laminar Jet.
5. Packed and plate column for absorption and humidification.
6. Drying rate measurements.
Process Equipment Design

2 2 0 4
Design of Pressure Vessel: Criteria of pressure vessel design, theory of failures of vessels
under pressure, classification of pressure vessels. Design of cylindrical and spherical shells
under (a) internal pressure (b) external pressure. Design of closures (formed ends). Design of
flanges
Storage Tanks: Design of storage tanks with and without stiffening, rings.
Heat Exchanger: Mechanical design of heat exchanger (complete).
Books Recommended
1. Brownell and Young, “Process Equipment Design-Vessel design”, …………….
2. Joshi, P.M.V., “Process Equipment Design”, ……………………..
3. Hesse and Rushton, Process Equipment Design , Van Nostrand.
4. Dawande, S.D., “Process Design of Equipments”, Central Techno Publications, Nagpur.
IS-803 (1962) for storage vessel.
IS-4503 (1967) for hot exchanger.
Process Instrumentation
2 1 0 3
1. Introduction: Measuring instruments and their function, elements of measurement,
important characteristics of industrial measurement.
2. Classification of Instruments: Recording and measuring types.
3. Temperature measurement: Classification of thermometers, and pyrometers, response of
thermometers, protecting wells.
4. Fluid filled expansion thermometers.
5. Thermocouples: Resistance thermometers.
6. Radiation and optical pyrometers.
7. Pressure and vacuum measurement: Classification.
8. Manometers- Inverted well pressure gauges.
9 Bourdon tube pressure gauges, diagram of pressure gauges.
10. Special measuring devices: Pressure and vacuum, McLeod gauge.
11. Thermal conductivity and ionization gauges.
12. Head and area flow meters-flow measuring devices
13. Liquid level measuring devices. Visual indicators float motivation, liquid level
instruments.
14. Pressure differential type level gauge.
15. Electrical contact type liquid level indicators.
7th Semester
Pre -project Work
0 0 4 2
The minor project is a prerequisite for completion of the seventh semester along with other
subjects. There is no course content fixed. Collection of information, survey of literature and
procurement of materials including chemicals are in the pre-project work. Objective of the
project work is decided. How the project work would be carried out in the eighth semester is
finalised at this stage. The same project is continued for the eighth semester. This includes
report writing for pre-project work, presentation of the work done followed by viva-voce
examination by the examiner (preferably external).
Note: A group of two students are assumed per project and a workload of nine hours per
week for a group is used for calculation.
Seminar
0 2 0 2
Literature study on a selected topic. Report writing and submission under the guidance of a
faculty member of the Department. Seminar presentation.
Chemical Technology–II
3 1 0 4
Coal and Coal Tars: Cola chemicals, law temperature and high temperature carbonization,
chemicals from coal tar. Sugar and Starch: Manufacture of raw sugar crystals from sugar
cane, refining operations, manufacture of starch from various materials, starch derivatives,
manufacture of glucose. Leather and Gelatin: Preparation of hides, vegetable and chrome
tanning, finishing operations, manufacture of gelatin from its raw materials, uses. Glues and
adhesives-types and their manufacture. Pulp & Paper: Sulphite and Kraft processes for
manufacture of paper. Oils, fats, soaps and detergents: Classification of vegetable oils and
fats, production of edible oil and fats, purification, hydrogenation of oils, classification
of cleaning compounds and their uses, methods for the production of soaps and
detergents. Fermentation Industry: Characteristics of fermentation process and economics of
fermentation industry, manufacture of alcohol from molasses. Penicillin, its types, properties,
consumption and its manufacturing process. Man Made Fibres: Classification, cellulosic
products. Viscose Rayons, their uses and manufacture. Polyamides-66-nylon, chemical
process and method of production. Polyester (Dacron miller), its manufacturing process.
Synthetic Plastics: Methods of polymerization, phenol formaldehyde, urea formaldehyde,
polyethylene and polyvinylchloride their uses and methods of production. Natural and
Synthetic Rubbers: Natural rubber and its processing. Butadiene-styrene polymer, its
methods of production. Polychloroprene and its manufacture. Dyestuffs: A general study of
dye stuffs with reference to their classification based on chemical structure & on its
application, azo and vat dyes. Petroleum and Petrochemicals: Occurrence, refinery, practice,
chemical refining, ethylene, acetylene, synthesis gas, butadiene, their uses and methods
of production.
Books Recommended
1. Rao, M.G., Sittig, M., “Dryden’s Outlines of Chemical Technology- for the 21st Century”.
East-West Press, 1997.

2. Austin, G.T., “Shreve’s Chemical Process Industries”, McGraw-Hill Book Company,

1984.
Mass Transfer–II
3 1 0 4
Distillation: vapour liquid equilibria for ideal and non-ideal systems. Relative volatility.
Azeotropes, Enthalpy-concentration diagrams. Single stage flash vaporisation. Partial
condensation. Differential distillation for binary systems. Fractionation, McCabe-Thiele and
Ponchen-Savarit methods for multistage operations. Reflux, reflux ratio and optimum reflux
ratio. Reboilers. Total and partial condensers. Tray efficiencies. Azeotropic, extractive and
steam distillations.
Extraction: Ternary liquid equilibria, calculation of single stage, multistage cocurrent and
multistage counter current operations.
Adsorption: Adsorption equilibria, calculations for vapour, gas and liquid adsorptions.
Adsorption operations such as single stage, multi stage, cocurrent and multistage counter-
current operations. Equipments.
Leaching: Principles. Equilibria, Calculations of single stage and multistage leaching
processes equipment.
Books Recommended
1. Treybal, R.E., “Mass Transfer Operations”, McGraw-Hill Book Company.
2. Badger, W.L., Banchero, J.T., “Introduction to Chemical Engineering”, McGraw-Hill
Book Company.
3. McCabe, W.L., Smith, J.C., Harriott, P., “Unit Operations of Chemical Engineering”,
References
1. Coulson, J. M., Richardson, F., “Chemical Engineering, Vol. II”, Butterworth-
Heinemann.
2. Norman, “Absorption, Distillation and Cooling Towers” , Leonard W.D. Hill Ltd.
3. Treybal, R.E., “Liquid Extraction”, McGraw-Hill Book Co.
3. Smith, B.D., “Design of Equilibrium Stage Processes”, McGraw-Hill Book Co.
Mass Transfer Laboratory –II

0 0 2 1
Study of the following:
1. Equilibrium still.
2. Ternary liquid-liquid equilibrium.
3. Simple distillation.
4. Steam distillation.
5. Adsorption isotherm.
6. Packed and plate column for extraction.

Process Dynamics & Control

2 1 0 3
1. Introduction: Feed forward, feed back systems, block diagrams.
1. Application of Laplace transformations.
3 Linear open loop system transfer function, example mercury thermometer with negligible
resistance of the wall.
4. Response of I-order system with step, sinusoidal and ramp inputs.
1. Further examples of I-order system (a) Mixing process (b) First order chemical reactions
(c) Liquid level control.
2. Response of I order system in series (a) Interacting and (b) non-interacting systems.
8. Second order system- example period of oscillation.
9. Transportation lag.
10. Linear closed loop systems components (a) Process (b) Measuring elements
(c) Conductor (d) Final control element
11. Controllers of final control elements: P, P+I, P+D, P+I+D
12. Diagram of a Chemical reactor control system.
13. Closed loop transfer function.
14. Transient response of a simple closed loop system for changes.
Books Recommended
1. Hangos, K.M.M., Bokor, J., Szederkenyi, G., Analysis and Control of Non-Linear
Process System”, Springer-Verlag, London Ltd.
2. Coughanowr, D.R., Koppel, L.B., “Process System Analysis and Control”, McGraw-Hill
Company.
3. Douglas, J.M., “Process Dynamics and Control. Vol.1: Analysis of Dynamic System”,
Prentice-Hall.
4. Coughanowr, D.R., “Process System Analysis and Control”, Tata McGraw-Hill.
5. Boyes, W. (ed)., “Instrumentation Reference Book, 3rd edn.”, Butterworth-Heinemann.
Process Dynamics & Control Laboratory

0 0 2 1
1. Study of first Order Transfer function using mercury in glass thermometer.
2. Study of a non-interacting flow system.
3. Study of an interacting system.
4. Study of computerized process control system for
a. Pressure Control
b. Temperature control
c. Flow control
5. Study of Multi-process control system for
a. Off- ON Control
b. Open loop control
c. Basic feed back control
d. PID Control

Plant Design
3 1 0 3
(Part-I)
1. Project Development: Process evaluation, pilot plant, commercial plant, flow diagram,
preliminary data collection, preparation of feasibility report.
2. Plant location and layout of chemical industries and nuclear plant.
3. Plant design factories, economic, technical and safety factors.
4. Project scheduling.
5. Material and energy balance, general aspects of complete process plant.
6. Scale-up: Principles of similarity, scale-up methods in Chemical Industries.
7. Cost estimation in Chemical Process Industries.
8. Optimum Design: Procedure with one and two variables. Optimum number of effects in
multiple effects evaporation, optimum insulation thickness.
9. Process Utilities: Importance of process utilities in chemical plant, storage and
distribution of water, air and steam. Heating and cooling media.
(Part-II)
1. Heat transfer equipment: Optimum design of heat exchanger, plate heat exchanger.
2. Mass transfer equipment: Distillation column, evaporator, dryer.
3. Design of cyclone separator, plate and frame filter press, rotary vacuum filter.
4. Reactor selection and design.
5. Pump selection and design.
2. Pipe selection, layout and design. Cross country pipe line.
Books Recommended
1. Peters, M.S., Timmerhaus, K.D., “Plant Design and Economics for Chemical Engineers”,
McGraw-Hill Inc., 1991.
2. Rose, H.F., Barrow, M.H., “Project Engineering”, …………………………………
3. Vilbrandt, F.O., Dryden, “Chemical Plant Design”, McGraw-Hill.
4. Chiltor, “Chemical Engineering Cost Estimation”, McGraw-Hill.
5. Johanstone, R.E., Thring, M.W., “Pilot Plant, Models and Scale-up Methods in Chemical
Engineering”, McGraw-Hill.
6. Kern, D.Q., “Process Heat Transfer”, McGraw-Hill.
7. Perry, J.H., “Chemical Engineers’ Handbook”, McGraw-Hill.
8. Treybal, R.E., “Mass Transfer Operations”, McGraw-Hill.
Polymer Sciences and Engineering

(Elective-I)
3 1 0 3
1. Introductory definitions and concepts:
a. Nature and special behaviour of high polymers.
b. Concept of functionality.
c. Different types of polymerization.
d. Molecular weight and degree of polymerization of high polymer.
2. Intermolecular forces of attraction in high polymers.
3. Polymer synthesis:
a. Classification of polymers and polymerization mechanisms.
b. Step reaction polymerization.

c. Mechanism of poly -condensation reaction and its kinetics.

d. Size distribution in linear condensation reaction.
e. Cross linking in step reaction systems.
f. Gel point observations.
g. XN in poly-functional system.
4. Chain Reaction Polymerization:
a. Kinetics of homogenous form radical polymerization (steady state analysis.)
b. Instantaneous numbers average degree of polymerization.
5. Co-polymerization:
a. The copolymer equation.
b. Instantaneous feed and polymer composition.
c. Integration of copolymer equation.
6. Rubber Elasticity:
a. Definition and properties of elastomers.
b. Theory of rubber elasticity.
7. Introduction, selection and design of reactors for polymerization reactions.
8. Polymer processes:
a. Bulk polymerization
b. Solution polymerization.
c. Suspensions polymerization, emulsion polymerization.
9. Fabrication Processes:
a. Definition of fabrication
b. One dimensional process
c. Two dimensional process
d. Fluidized bed costing
e. Extrusion
f. Calendering
10. Manufacture of polyethylene, S.B.R., polyvinyl chloride, polyester, nylon-6, Nylon-6, 6.
Books Recommended
1. Polymer Science Engg. by D.J. Williams
2. Principles of Polymer systems by Ferdinand Rodgigu
3. Text book of Polymer by Billmeyar
Environmental Engineering
(Elective-I)
3 1 0 3
Air Pollution
Sources of air pollution & nature of pollutants. Health effects, ecological problem,
meteorological effects, air quality standards and management of air resources, analytical
techniques in air pollution, design considerations in pollution control system, equipment
for particulate removal, pollution in various chemical industries.
Water Pollution
Nature of water pollutants and their sources, water quality standards, stream pollution,
BOD and COD . Water cycle and its characteristics. Methods of water pollution control.

Land Pollution
Treatment and disposal of solid wastes: incineration, pyrolysis, composting, sanitary
land filling. Hydrological aspects of solid waste disposal.
Books Recommended
2. Salvato, Jr. J.A., “Environmental Engg and Sanitation”, Willey-Interscience.
3. Sax,lrving, N., “Industrial Pollution”, Van Nostrand Company.
4. Vesilind, P.A. and Rimer, A.E., “Unit Operations in Resource Recovery Engineering”,
Prentice Hall, Inc., 1981.
5. Metcalf & Eddy, INC., “Waste Water Engineering: Treatment, Disposal and Reuse”, Tata
McGraw-Hill Publishing Company Ltd., New Delhi, 1990.
Reference Books
1. Strauss, W., “Industrial gas Cleaning”, Pergamon Press.
2 Perkins, H.C., “Air Pollution”, McGraw-Hill.
Operation Research
(Elective-I)
3 1 0 4
The nature and development of operation research, problem formulation, linear programming
problem, graphical, simplex method, two phase -simplex method, Big M method,
transportation and assignment models.
Replacement models- simple problems. Game theory, two person zero sum game,
Sequencing Models-processing n-jobs through two machine, processing n-jobs through three
machines.
Queuing Theory: Single-Channel poisson Arrivals with exponential service (M/M/I) model.
Books Recommended
3. Shamblin, Stenamm, C.G., “Operations Research: A Fundamental Approach” McGraw-
Hill,Nagakusha, 1974.
4. Churchman, C.V., Apkoff, F.I, Arnoff, E.L., “Introduction to Operations Research”, John
Viley, 1976.
5. Sasieni, M., Yaspan, A., Friedman, “Operations Research: Methods and Problems”, John
Viley, 1950.
6. Hamidi, A., Taha, “Operation Research: An Introduction”, Macmillan.
7. Maggu, P.L., “Linear Programming and Operations Research”.
8. Gass, S.I., “Linear Programming”, McGraw-Hill.

8th Semester
Project
0 0 9 6
The major project is a prerequisite for completion of the eighth semester along with other
subjects. This is in continuation of the project carried out in the seventh semester.
Experimental/theoretical works are carried out by the students on problems in chemical
engineering and its allied areas as assigned by the project advisor. Pproject report writing and
submission, presentation of the work done followed by viva-voce examination by an external
examiner.
Note: A group of two students are assumed per project and a workload of nine hours per
week for a group is used for calculation.
Industrial Training & Presentation

0 2 0 2
Students are required to carry out training in any process industry for a specific period. They
have to write report on whatever is done and learnt by them in the factory. Report writing and
presentation are the part of this.
Biochemical Engineering
2 1 0 3
Evolution of modern biochemical processes. Role of biochemical engineer in the
development of modern fermentation processes. Status of biochem. engg. in the fermentation
industry.
Types of Microorganism: Bacteria, fungi, viruses, algae, protozoa. Cell types and their
structure (Eucaryotic and Procaryotic).
Chemicals of Life: Carbohydrates, fats, proteins, RNA and DNA (structure, uses and
functions).
Understanding Enzymes: Naming and classification, specificity of enzyme action, active
cites, factors affecting enzyme-catalyzed reactions. Kinetics of enzyme-catalysed reactions
(Michaclis-Menten Equation and Lineweaver Burk Plots).
Fermentation: Aerobic and anaerobic fermentation. Requirement for growth and media
formation. Growth cycle phases for batch cultivation. Parameters of growth and analysis of
growth data. Growth kinetics. Aeration and agitation. Sterilization. Scale-up. Bio-reactors.
Bioseparation processes.
Text Books
1. Bailey, J. E., Ollis, D. F., “Biochemical Engg. Fundamentals”. McGraw-Hill Book
Company, New York (1985).
2. Shuler, M., Kargi, F., “Bioprocess Engineering, Basic Concep”. Prentice Hall of
India Pvt. Ltd. (2004).
3. Moser,A., “Bioprocess Technology”. Springer-Verlag, New York (1988).
Reference Bookls
1. Pelczar, M.J., Chan, E.C.S., Krieg, N.R., “Microbiology”. McGraw-Hill Book
Company (1986).

2. Aiba, S., Humphrey, A.E., Millis, N.F., “Biochemical Engineering”. Academic Press,
N.Y. (1965).
3. Fairley, J .L., Kilgour, G. L., “Essentials of Biological Chemistry”. Reinhold
Publishing Corporation (1966).
4. Palmer, T., “Understanding Enzymes”. Ellis Horwood Limited, Halsted Press, a
division of John Wiley & Sons (1985).
Note: Internet websites strongly recommended for viewing latest developments in the area.
Biochemical Engineering Laboratory

0 0 3 2
1. Study of a fermenter
2. Study of sterilization.
2. Preparation of culture media for microbes.
3. Preparation of agar slants and agar plates for growth and preservation of microbial
cultures.
4. Enumeration of microbes by microscopic and plate counting methods.
5. Study of kinetics of growth, product formation and substrate utilization.
6. Study of microbial death kinetics.
7. Study of bioseparations.
Industrial Economics and Management

2 1 0 3
1. Cost Estimation: Capital investment, working capital, manufacturing cost, depreciation,
insurance and taxes.
2. Decision Making: Annuities, perpetuities, capitalized costs, cash flow charts, break-even
charts.
3. PERT and CPM.
4. Organization: Structural development.
5. Production Planning and Control, inventory and quality control and time and motion
study.
6. Personnel: Organization, labour relations, wages and incentives.
7. Marketing and Finance: Capital structure, fixed capital and working capital, pricing
fundamentals, advertising and sales promotion.
Books Recommended
1. Peters, M.S., Timmerhaus, K.D., “Plant Design and Economics for Chemical Engineers”,
McGraw-Hill.
2. Schwever , H.D., “Process Engineering Economics”, McGraw- Hill.
3. Chilton, “Chemical Engineering Cost Estimation”, McGraw-Hill.
4. Bauman, H.C., “Fundamentals of Cost Engineering in the Chemical Industry”, Reinhold
Book Corporation, New York.
5. Jelen, F.C., “Cost and Optimization Engineering”, Mc Graw-Hill, New York.

Leather Technology
(Elective-II)
2 1 0 3
Histology of animal skins, skin structure and chemical and physical properties of leather.
Pre-tan Operations: Preservation, washing, soaking, un-hairing, liming, bating, pickling,
degreasing. Tanning Operations: Vegetable and chrome tanning, formaldehyde tanning,
alum tanning. Post Tanning Operations: Fat liquoring, dyeing, drying, buffing etc. Status of
Indian Leather Industry.
Books Recommended
1. Flaherty, F.O., Roddy, W.T., Lollar, M., “Chemistry and Technology of Leather,
Vol.1&2”, Reinhold Publishing Corporation.
2. Das, R.B.M., “Hand Book of Tanning” Bulleting, Govt. of West Bengal. 1958.
Distillation
(Elective-II)
2 1 0 3
Basic concepts of phase equilibria. Distribution co-efficient. Ideal and non-ideal systems.
Design variables. Equilibrium flash separation. Binary distillation, x-y diagrams. Enthalpy-
concentration diagrams. Design calculations. Multi-component distillation. Design
calculations. Theoretical analysis. Azeotropic and extractive distillation. Distillation
equipment. Plate and packed towers. Design procedures.
Books Recommended
1. C. D. Holland: Multi-component distillation.
2. M. Van Vincle : Distillation.
3. B.D. Smith: Design of Equilibrium Stage Processes.
4. H. Sawistowski and W. Smith : Mass Transfer Process Calculations.
5. R.E Trebal: Mass Transfer.
6. Sherwood, Pigford and Wilke: Mass Transfer.
Advanced Statistics For Chemical Engineering

(Elective-II)
2 1 0 3
Special continuous probability distributors. Random variable, probability distribution of a
continuous random variable. Moment Generating function and Characteristic Function of
continuous random variable. Normal distribution, Normal probability curve, additive
property of normal random variable, Beta and Gamma Distribution, Mean, variance and
Moment Generating Function of these distributions.
Sampling Distributions
Sampling distribution of sample mean and sample variance.
Chi-square distribution, and chi-square test. Testing of hypothesis.
Theory of Estimation
Point estimation, Fishers’ criterion of best estimator, consistent estimator, sufficient and
unbiased estimator, maximum likelihood method of estimation, method of moments. Interval
Estimation
Books Recommended
1. Fundamentals of Mathematical Statistics by S.C.Gupta and V.K. Kapoor.
2. Mathematical Statistics by C.E. Weaherburn. 3. Sampling Theory by Des Raj.
Optimization Techniques in Chemical Engineering

(Elective-II)
2 1 0 3
1. Basic concepts of systems analysis and optimization.
2. Classical optimization techniques.
3. Linear programming.
4. Two phase simple method and duality in linear programming.
5. Transportation] models.
6. Assignment Models.
7. Non-linear programming.
8. Method of Lagrange Multipliers.
9. Wolf’s method for solving N.L.P.P.
10. Introduction to Dynamic programming
11. Application to Chemical Engineering
Books Recommended
1. Beveridge & Schecter, “Optimization Principles & Practice”, …………………..
2. Hussain, A., “Optimization for Chem. Engineers”, ………………………………….
Reference Books
1. Vilde, “Optimum Seeking Methods”, …………………………………………
2. Aris, R., “Dynamic Programming”,…………………………………………..
3. Gauss, “Linear Programming”, ……………………………………………..
4. Hadley, “Linear Programming”, …………………………………………….
5. Hadley, “Non-Linear Programming”, ……………………………………….
Instrumental Methods of Analysis

(Elective-III)
2 1 0 3
General discussion, theory, instrumentation, typical application, advantages, limitations and
sources of errors of the following:
Instrumental Techniques:
Spectrometric methods, Spectrophotometry, flourometry, emission spectroscopy, flame
photometry and atomic absorption spectrometry.
Electrometric methods, Conductometry, potentiometry, polarography, amperometry and
coulometry. Radiometric methods-Activation analysis and isotopic dilution. Gas
chromatography.
Books Recommended
1. Lyalikov, Y., “Problems in Physico Chemical Methods of Analysis”, Mir Publishers,
1974.
2. Howard, A., Strobel, William, R., Heineman, “Chemical Instrumentation: A Systematic
Approach, 3rd edn.”, John Wiley & Sons, New York, 1989.

3. Robinson, J.W., “Undergraduate Instrumental Analysis, 3rd edn.”, Marcel Decker, New
York, 1982.
4. Ewing, G.W., “Instrumental Methods of Chemical Analysis, 5th edn.”, McGraw-Hill.
New York, 1985.
5. Willard, H.H., Merritt, L.L., Dean, J.A., “Instrumental Methods of Analysis, 6th edn.”,
Van Nostrand, 1981.
Petroleum and Petrochemical Technology

(Elective-III)
2 1 0 3
1. Petroleum: Composition and classification of petroleum crude. Distillation practice.
Refining by physical and chemical methods. Thermal and catalytic cracking, reforming,
polymerization isomerization, alkylation and hydrogen treating. Petroleum products
including lubricating oils, waxes and coke.
2. Petrochemicals: Natural gas, production of petrochemical recurs-ors - synthesis gas,
hydrogen, acetylene, ethylene, propylene, butylene, aromatics and naphthenes.
Petrochemical derivatives and products.
Books Recommended
1. Hsu, Chang, S., Robinson, Paul R. (Eds.), “Practical Advances in Petroleum
Processing”, Springer, 2005.
2. Rao, M.G., Sitting, M.,”Drydens Outlines of Chemicals Technology, 3rd edn.”, East-West
Press, 1997.
3. Nelson, WL, “Petroleum Refinery Engineering”, McGraw-Hill, New York, 1961.
4. Kenneth, A., Mcketta, K., “Advances in Petroleum Chemistry and Refining Vol.
I(1958)–Vol. X(1965)”, Interscience Publishers, New York.
Source: aruna@niscair.res.in (Kind attention: Mrs. Dipa Bhardwaj)
Food Technology
(Elective-III)
2 1 0 3
Constituents of foods. Nutritive aspects of food. Equipments and processes used in food
industries. Deteriorative aspects of food and its control. Preservation of foods by heat and by
cold. Fluid food concentration. Food dehydration. Food irradiation and microwave heating.
Food sterilization and pasteurization. Pickling and fermentation.
Rice. Wheat. Pulses. Fruits and vegetables. Spices. Bread and biscuits. Confectionery.
Proteins. Soft and alcoholic beverages. Dairy products. Meat. Fish products.
Books
1. Potter, N.N., “Food Science”, AVI Publishing Company, Westport Connecticut,
1973.
2. Singh, R.P., Heldman, D.R., “Introduction to Food Engineering, 2nd edn.” Academic
Press, New York, 1993.
3. Toledo, R.T., “Fundamentals of Food Process Engineering”, AVI Publishing Co.,
Westport, Connecticut, 1980.
4. Karel, M., Fennema, O., “Principles of Food Science, Part II: Physical Principles of Food
Preservation”, Marcel Dekker, Inc., 1975.

5. Lapedes, D.N., “McGraw-Hill Encyclopedia of Food, Agriculture and Nutrition”,

McGraw-Hill, New York, 1975.
6. “Food Industries”, Chemical Engineering Education Centre,IIT Madrs.
Entrepreneurship Development
(Elective-IV)
2 1 0 3
Introduction: Entrepreneur-ship education- relevance and scope, entrepreneurial
competencies and characteristics, risks and rewards of entrepreneur-ship, benefits of small
scale Industry.
Entrepreneurial motivation and attitude development.
Understanding human behaviour, motivation, types, achievement motivation measurement
and development, self assessment and goal setting, risk taking, stress and conflict
management, group dynamics, leadership and communication, role of technical
entrepreneur, case Study of successful entrepreneurs.
Launching of a Small Scale Industry.
Procedure of setting up of a new industry, Govt. policy with respect to SSI. Institutional
support structure for SBI. Role of development agencies, incentives, subsidies, concessions
for SSI.
Project Planning and Execution:
Identification of opportunities. Screening of project ideas, Preliminary and detailed project
report, technical and chemical appraisal, techno- economic feasibility studies, project
scheduling, PERT/CPM application, profitability criteria, cist-benefit analysis, breakeven
and sensitivity analysis, assessment of working capital, sources of finance, equity and term
loan, financial ratios, time value of money and cost equivalence. Technology management
arrangements, role of rational laboratories. Marketing management, Survey and research,
sales production and after sale service.
Books Recommended
1. Handbook for the Entrepreneurs, KOI Ahmedabad.
2. Entrepreneurial Development, P. Bharavanavel.
3. Project Planning and Entrepreneurship Development, E.R. anga.
4. Financial Management, Nuchhal, S.C. C.P House 9th Edition.
5. Small Business Management Fundamentals, Steia Hoff, 1980,
M-hill (1972)
6. Industrial Guide lines Published by the Ministry of Development
(every year )
7. How to Prepare a Project Report, HOT Manual 1993.

Numerical Analysis
(Elective-IV)
2 1 0 3
Interpolation and numerical Integration
Hermit Interpolation and inverse interpolation, Numerical differentiation and Numerical
integration, Newton-Cotes integration methods and Gaussian integration methods.
Numerical solution of algebraic and Transcendental Equations:
Muller method, Chebyshev Method, Graeffe’s root square Method, Bairstow Method,
Birge-Vieta method.
Difference equations:
Principles of material and energy balance applied to Chemical Engineering Problems,
Formulation of ordinary and Partial differential equations, Numerical solutions of ordinary
differential equations, Initial value problems, Single step Method, Predictor-corrector
Methods, Milnes Method and Adams-Bash Forth Method, Numerical methods of solving
Parabolic partial differential equations. Schmidt Method, Crank-Nicolson method and Dufort
Frankel method.
Books Recommended:
1. Numerical Solution of differential equations by M.K.Jain. Oscar Publications New Delhi.
2. Mathematical Methods in Chemical Engineering by Jansen Jaffreys-(Academic Press).
3. Applied Mathematics in Chemical Engineering by H.S.Reed and T.KS Herwood
(McGraw Hill).
4. Numerical Solution of ordinary differential equation by Lapidus, L&J Seinfeld
(Academic Press).
5. Numerical Methods for Scintific and engineering computation by M. K.Jain, lyengar and
R.K.Jain, Wilay Eastern Ltd.
6. Theory and problems in Numerical methods by T.Veerrarjan and T.
Ramachandaran Tata MacGraw- Hill publishing company, New Delhi, 2004
NOMENCLATURES
CHE : Chemical Engineering
CHM : Chemistry
ECE : Electronics and Communication Engineering
ELE : Electrical Engineering
HSS : Humanities and Social Sciences
MEC : Mechanical Engineering
MTH : Mathematics

Revised Scheme of Courses and Syllabi 4 Years (8-Semesters) B.Tech. Degree Programme in Chemical Engineering

Uploaded by

Copyright:

Available Formats

Revised Scheme of Courses and Syllabi 4 Years (8-Semesters) B.Tech. Degree Programme in Chemical Engineering

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Revised Scheme of Courses and Syllabi 4 Years (8-Semesters) B.Tech. Degree Programme in Chemical Engineering

Uploaded by

Copyright:

Available Formats

Revised Scheme of Courses and Syllabi

DEPARTMENT OF CHEMICAL ENGINEERING

Revised Scheme of Courses for B.Tech. Chemical Engineering

Recommended for 2006 Batch onwards 1 March - 2008

E-1:Any one of the following elective courses

E-2: Any one of the following electives courses

E-3: Any one of the following elective courses

E-4: Any one of the following elective courses

Recommended for 2006 Batch onwards 2 March - 2008

Revised Syllabi for B.Tech. Chemical Engineering

Recommended for 2006 Batch onwards 3 March - 2008

Complex Variables & Special Functions

Mechanistic Organic Chemistry

Recommended for 2006 Batch onwards 4 March - 2008

Elimination & Rearrangement Reaction

Mechanistic Organic Chemistry Laboratory

Recommended for 2006 Batch onwards 5 March - 2008

Engineering Mechanics Laboratory

Electrical Engineering Technology

Basic Electrical Engineering Laboratory

Design of Machine Elements

Fluid Mechanics Laboratory

Mass and Energy Balance

Heat and Power Engineering

Heat and Power Engineering Laboratory

Recommended for 2006 Batch onwards 9 March - 2008

Industrial Organization and Management

Statistics and Probability

Recommended for 2006 Batch onwards 10 March - 2008

Recommended for 2006 Batch onwards 11 March - 2008

Mechanical Operations Laboratory

Heat Transfer Operations

Heat Transfer Laboratory

Chemical Reaction Engineering – I

Recommended for 2006 Batch onwards 13 March - 2008

2. Fogler, H.S., “Elements of Chemical Reaction Engineering, 2nd ed.”, Prentice-Hall of

Chemical Engineering Thermodynamics

Recommended for 2006 Batch onwards 14 March - 2008

Material Science & Technology

Recommended for 2006 Batch onwards 15 March - 2008

6. Khadi Grammodyog Commission Report on Gobar Gas Plant.

Energy Engineering Laboratory

Recommended for 2006 Batch onwards 16 March - 2008

Transport Phenomena Laboratory

Recommended for 2006 Batch onwards 17 March - 2008

Chemical Reaction Engineering – II

Recommended for 2006 Batch onwards 18 March - 2008

Chemical Reaction Engineering Laboratory

Recommended for 2006 Batch onwards 19 March - 2008

Mass Transfer Laboratory – I

Process Equipment Design

Recommended for 2006 Batch onwards 21 March - 2008

2. Austin, G.T., “Shreve’s Chemical Process Industries”, McGraw-Hill Book Company,

Mass Transfer Laboratory –II

Recommended for 2006 Batch onwards 22 March - 2008

Process Dynamics & Control

Process Dynamics & Control Laboratory

Recommended for 2006 Batch onwards 23 March - 2008