Professional Documents
Culture Documents
Electrical Quote
Electrical Quote
All the work shall be as per Electrical Inspectorate & Electricty Board rules and other statutory
requirements.
L.T. PANELS
Unloading, shifting, Installation, testing and commissioning of LV switchgear panel as per RRL SLD
- 415 V, 3 phase-4wire, TPN, 50 Hz, with Al busbars. The panel shall be a free standing, floor
mounted panel with top/bottom cable entry. The panel shall have an integral base frame of 75
mm. The panel shall be properly grouted on the floor. Proper connections and alignment of the
different transport sections of the panel is the contractor's responsibility. The panel installation
shall be in line with the relevant specifications and Indian codes and standards and RRL guidelines
3234569 Floor panel, 100A, 125A, 160A & 250A (Normal and Kerala / TN specific)
Supply & Installation of 4P manual MCCB with supply cable leads near EB metering unit / on
secondary side of transformer. The Enclosure for the MCCB shall be suitable for the location -
indoor
3235559 8 WAY VTPN DB WITH PROVISION FOR DPX 250ER MCCB AS INCOMER
3235597 160A,TPN,415V,25KA, MCCB(MOULDED CASE CIRCUIT BREAKER) WITH O/L + S/C + SHUNT
RELEASE
3235596 125A,TPN,415V,25KA, MCCB(MOULDED CASE CIRCUIT BREAKER) WITH O/L + S/C + SHUNT
RELEASE
3235579 63A,TP,415V,10KA,C TYPE MCB (MINIATURE CIRCUIT BREAKER)
3235576 32A,TP,415V,10KA,C TYPE MCB (MINIATURE CIRCUIT BREAKER)
3235575 25A,TP,415V,10KA,C TYPE MCB (MINIATURE CIRCUIT BREAKER)
Installation & commissioning of UPS
Installation, testing and commissioning of 440 volt ,50 hz, AC input and output of 230 volt. 50 hz.
The Installation shall be as per standard RRL specifications and manufacturer's manual and
relevant codes and standards
3161886 6 KVA
3314521 1 KVA
Installation & commissioning of Inverter
Installation and commissioning of 230 volt ,50 hz, AC input and output 230volt AC ,50 hz,sine
wave ;30 mins. Back-up with maintenance free battery . The Installation shall be as per standard
RRL specifications and manufacturer's manual and relevant codes and standards
3157490 2kVA
Voltage stabiliser
Installation, testing and commissioning of Voltage stabiliser using owner material of 61 to
100KVA 440 volt ,50 hz, AC input and output The Installation shall be as per standard RRL
specifications and manufacturer's manual and relevant codes and standards
3157494 50 KVA
CABLE TRAYS & CONDUITS
3209817 Supply & installation of MS powder coated (powder coating of 80 microns thick with a 9 tank
process & colour - RAL 9010) solid Cable Raceways of size 300 x 50 mm, 18 SWG without cover .
Rate of supply should be inclusive of all accessories like 45 deg/ 135 deg bends in the horizontal
and vertical plane , tees, coupler plates & all suspension accessories (@1.0 mtr)
3209818 Supply & installation of MS powder coated (powder coating of 80 microns thick with a 9 tank
process & colour - RAL 9010) solid Cable Raceways of size 150 x 50 mm, 18 SWG without cover .
Rate of supply should be inclusive of all accessories like 45 deg/ 135 deg bends in the horizontal
and vertical plane , tees, coupler plates & all suspension accessories (@1.0 mtr)
3209815 Supply & installation of MS powder coated (powder coating of 80 microns thick with a 9 tank
process & colour - RAL 9010) solid Cable Raceways of size 300 x 50 mm, 18 SWG & with cover of
20 SWG . Rate of supply should be inclusive of all accessories like 45 deg/ 135 deg bends in the
horizontal and vertical plane , tees, coupler plates & all suspension accessories (@1.0 mtr)
3209816 Supply & installation of MS powder coated (powder coating of 80 microns thick with a 9 tank
process & colour - RAL 9010) solid Cable Raceways of size 150 x 50 mm, 18 SWG & with cover of
20 SWG . Rate of supply should be inclusive of all accessories like 45 deg/ 135 deg bends in the
horizontal and vertical plane , tees, coupler plates & all suspension accessories (@1.0 mtr)
Supplying & Installation of G.I. Junction Box of 16 SWG, with S.S top cover with fixing hardware
etc. in ceiling / wall / underfloor and making good the chased portion.
3160502 Junction box of 75x 75 x 50 mm size open on all sides
Supplying and installation of different sizes of heavy duty FR PVC conduit in recess/on surface
including all accessories, M.S. junction/ pull boxes, fixing hardware etc including chasing the
wall/floor and plastering the chased portion and making good the finish
3157507 4C X 16 sq.mm AL
3161974 4C X 10 sq.mm AL
3161975 3.5C X 25 sq.mm AL
3161977 3.5C X 50 sq.mm AL
3161978 3.5C X 70 sq.mm AL
3161979 SUP&LAY CBL 1.1KV ARM XLPE AL 3.5C X 95 sq.mm AL
3161980 SUP&LAY CBL 1.1KV ARM XLPE AL 3.5C X 120 sq.mm AL
3161982 SUP&LAY CBL 1.1KV ARM XLPE AL 3.5CX185
Supply and Laying of 1.1 KV Grade PVC insulated FLEXIBLE cable with copper conductor as per IS -
694. The cable shall either be 'laid in trench 0.5M wide 0.75M deep / RCC 'Hume pipe of size
150mm / ready -made cable tray with proper clamping. Rate shall be inclusive of cable tags,
clamps, etc. Cable tags shall be of aluminium engraved sheets (2mm) tied at regular intervals.
3161992 3C x 4 sq mm Cu
3161993 3C x 2.5 sq mm Cu
3162004 S&L APRV PVC FLEXIBL CBL 1.1KV, CU 4CX10MM2
Supply and Laying of XLPE insulated FR PVC outer sheathed , inner extruded PVC
sheath ,ARMOURED, stranded COPPER conductor cables of 1.1KV 'class cables per IS 7098 Part -1.
The cable shall either be 'laid in trench 0.5M wide 0.75M deep / RCC 'Hume pipe of size
150mm / ready -made cable tray with proper clamping.Rate shall be inclusive of cable tags,
clamps, etc. Cable tags shall be of aluminium engraved sheets (2mm) tied at regular intervals of
not less than 10 mtrs.
3162045 4C X 16 sq.mm AL
3162073 7C x 1.5 sq.mm Cu
3162044 4C X 10 sq.mm AL
3162046 3.5C X 25 sq.mm AL
3162048 3.5C X 50 sq.mm AL
3162049 3.5C X 70 sq.mm AL
3162050 SUP&TRM 1100V AL ARM XLPE 3.5CX95MM2
3162051 SUP&TRM 1100V AL ARM XLPE 3.5CX120MM2
3162053 SUP&TRM 1100V AL ARM XLPE 3.5CX185MM2
Supply and making END TERMINATION with brass single compression glands for indoor
terminations and double compression cable glands for outdoor terminations, and solderless
crimping type tinned Cu lugs for the following XLPE insulated PVC sheathed 1100 V grade,
UNARMOURED, stranded, COPPER conductor cable including cost of ferrules, cable sockets,
insulation tape and other accessories as required.
3162109 4C x 4 sq mm Cu
3162112 3C x 4 sq mm Cu
3162079 3c x 10 sq mm Cu
3162113 3C x 2.5 sq mm Cu
3162079 4c x 10 sq mm Cu
LIGHTING, FANS & POWER OUTLET POINT WIRING
3248493 Supply, installation, testing & commissioning of 6A, 3 pin switch & socket on modular board with
all materials, accessories, labour etc for flush/surface mounting.
3248496 Supply, installation, testing & commissioning of 6/16A, 5 pin switch & socket on modular board
with all materials, accessories, labour etc for flush/surface mounting.
3248601 Supply, installation, testing & commissioning of 6A, SP modular switch on modular switch board
with all materials, accessories, labour etc for flush/surface mounting.
POWER RECEPTACLES
Supply, installation, testing and commissioning of Plug and socket DBs with suitable MCBs and
neutral links housed in GI enclosure,dulywired, with earthing facility. The rate shall include switch
plates, chasing walls/floors, fine finished plastering with wire mesh etc.
3157523 20 A, 3 pin socket outlet with 20A SPN MCB in metal enclosure
3157527 32A TPN MCB in metal enclosure - weather proof
3242377 25 A FP MCB in metal enclosure
3210431 40 A DP MCB with metal enclosure
3227788 APP-S&I OF 32A DP MCB 10KA IN IP65
3290134 SITC 32A TP PLG&SCKT W/32A DP MCB
3235308 SF CIR BR MCB DP 16A 230V 10KA C TYPE
3318634 Supply, installation, testing & commissioning of 4 pole CRCA sheet metal enclosure, powder
coated, suitable for flush or surface mounting, single door, provision to mount MCB/RCBO/SPD &
other modular devices with Din Rail suitable to 04 pole preferably white/Traffic white /off white
colour. Make - Legrand/Havels/Siemens/Schneider.
3330921 Supply, installation, testing & commissioning of single /multi tone call bell with bell push switch.
surface/wall /pole mounted, continuous rating solid state,
shock proof, long life, operating voltage as 230V AC +/-10%, 50 Hz, Output-85-95 dB, Color-white
colour.
High Impact resistive & Flame retarding Material Make # Anchor/Legrand/Havel/ Vaishnavi
/L&T/Schneider/Siemens Equivalent etc.
3181734 Installation & testing of Light fixtures-Surface Mounted CFL/FTL Fixture (BTIR 128 T5/BTIR 228 T5)
3248939 Installation, testing, commissioning of trunk mounted T5 FTL (28W/54W) light fixture including
trunk & accessories.
3327662 SITC OF 20 W / 22 W LED, CIR REC ,5700K - IP 65 Supply, Installation, testing & Commissioning of
20 W / 22 W LED, Circular Recessed mounted luminaire having integrated LED Lamps & constant
current output driver having operating voltage range 120V-270V AC supply voltages. Luminaire
should be with aluminum housing & Powder coated finished, Hardware Material – MS Zinc
Coated & Passivated. Light fixture should be supplied with necessary mounting accessories & Opal
Diffuser, Light fixture should have lumen O/P of minimum 90-100 lumens/watt, Color Temp. 5700
Deg.K and THD <10%. Make - Bajaj/Wipro/PMEA/Asian Retail/Light book
3161934 Supplying and installation of 25 mm dia. Heavy duty PVC conduit in recess/on surface
including all accessories, M.S. junction/ pull boxes, fixing hardware etc including chasing the
wall/floor and plastering the chased portion and making good the damages etc. complete as
required.
3160502 Supplying & Installation of M.S. Junction Box size 3 in. x 3 in. with fixing hardware etc including
the wall/floor and plastring the chased potion and making good the damages etc. complete as
required.
3161934 Supplying and installation of 25 mm dia. Heavy duty PVC conduit in recess/on surface
including all accessories, M.S. junction/ pull boxes, fixing hardware etc including chasing the
wall/floor and plastering the chased portion and making good the damages etc. complete as
required.
3160502 Supplying & Installation of M.S. Junction Box size 3 in. x 3 in. with fixing hardware etc including
the wall/floor and plastring the chased potion and making good the damages etc. complete as
required.
3161934 Supplying and installation of 25 mm dia. Heavy duty PVC conduit in recess/on surface
including all accessories, M.S. junction/ pull boxes, fixing hardware etc including chasing the
wall/floor and plastering the chased portion and making good the damages etc. complete as
required.
3160502 Supplying & Installation of M.S. Junction Box size 3 in. x 3 in. with fixing hardware etc including
the wall/floor and plastring the chased potion and making good the damages etc. complete as
required.
3161934 Supplying and installation of 25 mm dia. Heavy duty PVC conduit in recess/on surface
including all accessories, M.S. junction/ pull boxes, fixing hardware etc including chasing the
wall/floor and plastering the chased portion and making good the damages etc. complete as
required.
Rate Amount
Nos 1.00 0
907,270
Nos 61.00
Nos 43.00
Nos. 23
Nos. 24
Mtrs 250
Mtrs 250
Nos. 4
Mtrs 90
Mtrs 90
Nos. 4
Mtrs 350
Mtrs 350
Nos. 19
Mtrs 90
Mtrs 90
Nos. 6