Defogger: Section
Defogger: Section
Defogger: Section
E
CONTENTS
BASIC INSPECTION .................................... 3 Component Function Check ....................................11 F
Diagnosis Procedure ...............................................11
DIAGNOSIS AND REPAIR WORKFLOW .......... 3 Component Inspection .............................................12
Repair Work Flow ...................................................... 3 G
DOOR MIRROR DEFOGGER LH ..................... 13
FUNCTION DIAGNOSIS ............................... 4 Description ...............................................................13
Component Function Check ....................................13
REAR WINDOW DEFOGGER SYSTEM ............. 4 Diagnosis Procedure ...............................................13 H
System Diagram ........................................................ 4 Component Inspection .............................................14
System Description ................................................... 4
Component Parts Location ........................................ 5 DOOR MIRROR DEFOGGER RH ..................... 16 I
Component Description ............................................. 5 Description ...............................................................16
Component Function Check ....................................16
DIAGNOSIS SYSTEM (BCM) ............................. 6 Diagnosis Procedure ...............................................16
Component Inspection .............................................17 J
COMMON ITEM ........................................................... 6
COMMON ITEM : CONSULT-III Function (BCM - ECU DIAGNOSIS ......................................... 19
COMMON ITEM) ....................................................... 6
K
BCM (BODY CONTROL MODULE) ................. 19
REAR WINDOW DEFOGGER ..................................... 6
Reference Value ......................................................19
REAR WINDOW DEFOGGER : CONSULT-III
Wiring Diagram ........................................................20
Function (BCM - REAR DEFOGGER) ...................... 6 DEF
CAN COMMUNICATION ..................................... 7 SYMPTOM DIAGNOSIS .............................. 27
System Description ................................................... 7 REAR WINDOW DEFOGGER AND DOOR M
COMPONENT DIAGNOSIS .......................... 8 MIRROR DEFOGGER DO NOT OPERATE. .... 27
Diagnosis Procedure ...............................................27
REAR WINDOW DEFOGGER SWITCH ............. 8
REAR WINDOW DEFOGGER DOES NOT N
Description ................................................................ 8
Component Function Check ...................................... 8 OPERATE BUT BOTH OF DOOR MIRROR
Diagnosis Procedure A/C and AV Switch Assem- DEFOGGER OPERATE. ................................... 28
bly .............................................................................. 8 Diagnosis Procedure ...............................................28 O
Diagnosis Procedure Front Air Control ..................... 8
BOTH DOORS MIRROR DEFOGGER DON’T
REAR WINDOW DEFOGGER RELAY ..............10 OPERATE BUT REAR WINDOW DEFOG-
P
Description .............................................................. 10 GER OPERATES .............................................. 29
Component Function Check .................................... 10 Diagnosis Procedure ...............................................29
Diagnosis Procedure ............................................... 10
DRIVER SIDE DOOR MIRROR DEFOGGER
REAR WINDOW DEFOGGER POWER SUP- DOES NOT OPERATE. ..................................... 30
PLY AND GROUND CIRCUIT ............................11 Diagnosis Procedure ...............................................30
Description .............................................................. 11
DEF-1
PASSENGER SIDE DOOR MIRROR DEFOG- PRECAUTIONS ................................................. 33
GER DOES NOT OPERATE. ............................ 31 Precaution for Supplemental Restraint System
Diagnosis Procedure .............................................. 31 (SRS) "AIR BAG" and "SEAT BELT PRE-TEN-
SIONER" ................................................................. 33
REAR WINDOW DEFOGGER SWITCH DOES Handling for Adhesive and Primer .......................... 33
NOT LIGHT, BUT REAR WINDOW DEFOG-
GER OPERATES ............................................... 32 ON-VEHICLE REPAIR ............................... 34
Diagnosis Procedure .............................................. 32
REAR WINDOW DEFOGGER ........................... 34
PRECAUTION ............................................. 33 Filament Check ....................................................... 34
Filament Repair ....................................................... 34
DEF-2
DIAGNOSIS AND REPAIR WORKFLOW
< BASIC INSPECTION >
BASIC INSPECTION A
DIAGNOSIS AND REPAIR WORKFLOW
Repair Work Flow INFOID:0000000001712098
B
DETAILED FLOW
1. LISTEN TO CUSTOMER COMPLAINT C
Listen to customer complaint. Get detailed information about the conditions and environment when the symp-
tom occurs.
D
>> GO TO 2
2. VERIFY THE SYMPTOM WITH OPERATIONAL CHECK E
Verify the symptom with operational check.
>> GO TO 3 F
3. GO TO APPROPRIATE TROUBLE DIAGNOSIS
Go to appropriate trouble diagnosis. G
>> GO TO 4
4. REPAIR OR REPLACE H
DEF
DEF-3
REAR WINDOW DEFOGGER SYSTEM
< FUNCTION DIAGNOSIS >
FUNCTION DIAGNOSIS
REAR WINDOW DEFOGGER SYSTEM
System Diagram INFOID:0000000001712099
ALLIA0559GB
Operation Description
• Turn rear window defogger switch ON when the ignition switch is turned ON. Then rear window defogger
switch transmits rear window defogger switch signal to BCM.
• BCM transmits rear window defogger control signal to IPDM E/R and display unit via CAN communication
when rear window defogger operates.
• IPDM E/R turns rear window defogger relay and heated mirror relay (if equipped) ON when rear window
defogger switch signal is received.
• Rear window defogger and door mirror defogger (if equipped) are supplied with power and operate when
rear window defogger relay and heated mirror relay (if equipped) turn ON.
• Rear window defogger ON is displayed when signal is received.
Timer function
• BCM turns rear window defogger relay and heated mirror relay (if equipped) ON for approximately 15 min-
utes when rear window defogger switch is turned ON while ignition switch is ON. It makes rear window
defogger and door mirror defogger (if equipped) operate.
• Timer is canceled after pressing rear window defogger switch again during timer operation. Then BCM turns
rear window defogger relay and heated mirror relay (if equipped) OFF. The same reaction also occurs during
timer operation, if the ignition switch is turned OFF.
DEF-4
REAR WINDOW DEFOGGER SYSTEM
< FUNCTION DIAGNOSIS >
Component Parts Location INFOID:0000000001712101
ALJIA0229ZZ
I
1. A. Steering column assembly 2. Rear window defogger switch M98 3. A. Rear window defogger ground
B. BCM M18, M20 (view with instru- (with auto A/C) or M49 (without auto connector D604
ment lower panel LH removed) A/C) B. Rear window defogger connector
D651 J
4. IPDM E/R E120, E122, E124 5. Door mirror (door mirror defogger)
LH D4, RH D107 (if equipped)
K
Component Description INFOID:0000000001712102
• Operates the rear window defogger with the operation of rear window defogger switch. DEF
BCM
• Performs the timer control of rear window defogger.
• Operates the rear window defogger and the door mirror defogger (if equipped) with the control
Rear window defogger relay
signal from BCM. M
• The rear window defogger switch is turned ON.
Rear window defogger switch
• Turns the indicator lamp ON when detecting the operation of rear window defogger.
• Heats the heating wire with the power supply from the rear window defogger relay to prevent N
Rear window defogger
the rear window from fogging up.
Door mirror defogger (if • Heats the heating wire with the power supply from the heated mirror relay to prevent the door
equipped) mirror from fogging up. O
DEF-5
DIAGNOSIS SYSTEM (BCM)
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (BCM)
COMMON ITEM
COMMON ITEM : CONSULT-III Function (BCM - COMMON ITEM) INFOID:0000000001712103
APPLICATION ITEM
CONSULT-III performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions for each system.
NOTE:
It can perform the diagnosis modes except the following for all subsystem selection items.
Diagnosis mode
System Sub system selection item
WORK SUPPORT DATA MONITOR ACTIVE TEST
Rear window defogger REAR DEFOGGER × ×
BCM BCM ×
Data monitor
ACTIVE TEST
DEF-6
CAN COMMUNICATION
< FUNCTION DIAGNOSIS >
CAN COMMUNICATION
A
System Description INFOID:0000000001712105
DEF
DEF-7
REAR WINDOW DEFOGGER SWITCH
< COMPONENT DIAGNOSIS >
COMPONENT DIAGNOSIS
REAR WINDOW DEFOGGER SWITCH
Description INFOID:0000000001712106
• The rear window defogger is operated by turning the rear window defogger switch ON.
• Turns the indicator lamp in the rear window defogger switch ON when operating the rear window defogger.
Component Function Check INFOID:0000000001712107
1. CHECK A/C AND AV SWITCH ASSEMBLY (REAR WINDOW DEFOGGER SWITCH) CIRCUIT
Does rear window defogger switch operate normally?
Is the inspection result normal?
YES >> Inspection End.
NO >> GO TO 2
2. CHECK HARNESS CONTINUITY
1. Turn ignition switch OFF.
2. Disconnect BCM and A/C and AV switch assembly.
3. Check continuity between BCM connector (A) and A/C and AV
switch assembly connector (B).
DEF-8
REAR WINDOW DEFOGGER SWITCH
< COMPONENT DIAGNOSIS >
1. Turn ignition switch OFF.
2. Disconnect BCM and front air control. A
3. Check continuity between BCM connector and front air control
connector.
B
A/C and AV switch
BCM connector Terminal Terminal Continuity
assembly connector
M18 9 M49 11 Yes C
4. Check continuity between BCM connector and ground.
LIIA2047E
DEF
DEF-9
REAR WINDOW DEFOGGER RELAY
< COMPONENT DIAGNOSIS >
REAR WINDOW DEFOGGER RELAY
Description INFOID:0000000001712109
1.CHECK FUSES
Check if any of the following fuses in the IPDM E/R are blown.
Terminals
Condition of rear
(+) Voltage (V)
window defogger
(–) (Approx.)
IPDM E/R con- switch
Terminal
nector
ON Battery voltage
E124 60 Ground
OFF 0
LIIA2190E
Is the inspection result normal?
YES >> Replace IPDM E/R. Refer to PCS-30, "Removal and Installation of IPDM E/R".
NO >> GO TO 3
3. CHECK INTERMITTENT INCIDENT
Check intermittent incident.
Refer to GI-51, "Intermittent Incident"
Is the inspection result normal?
YES >> Check the following.
• Battery power supply circuit.
• IPDM E/R.
NO >> Repair or replace the malfunctioning parts.
DEF-10
REAR WINDOW DEFOGGER POWER SUPPLY AND GROUND CIRCUIT
< COMPONENT DIAGNOSIS >
REAR WINDOW DEFOGGER POWER SUPPLY AND GROUND CIRCUIT
A
Description INFOID:0000000001712112
Heats the heating wire with the power supply from the rear window defogger relay to prevent the rear window B
from fogging up.
Component Function Check INFOID:0000000001712113
DEF-11
REAR WINDOW DEFOGGER POWER SUPPLY AND GROUND CIRCUIT
< COMPONENT DIAGNOSIS >
1. Disconnect IPDM E/R.
2. Check continuity between rear window defogger connector (A)
and IPDM E/R connector (B).
1. CHECK FILAMENT
Check the filament for damage or open circuits.
Refer to DEF-34, "Filament Check".
Is the inspection result normal?
YES >> Inspection End.
NO >> Repair filament. Refer to DEF-34, "Filament Repair".
DEF-12
DOOR MIRROR DEFOGGER LH
< COMPONENT DIAGNOSIS >
DOOR MIRROR DEFOGGER LH
A
Description INFOID:0000000001712116
Heats the heating wire with the power supply from the rear window defogger relay to prevent the door mirror B
from fogging up.
Component Function Check INFOID:0000000001712117
C
1. CHECK DOOR MIRROR DEFOGGER LH
Check that heating wire of door mirror defogger LH is heated when turning the rear window defogger switch
ON. D
Is the inspection result normal?
YES >> Door mirror defogger is OK.
NO >> Refer to DEF-13, "Diagnosis Procedure". E
F
1. CHECK POWER SUPPLY
Check if the following fuse in the IPDM E/R is blown.
G
COMPONENT PARTS AMPERE FUSE NO.
IPDM E/R 15A 43
Is the inspection result normal? H
YES >> GO TO 2
NO >> If fuse is blown, be sure to eliminate cause of malfunction before installing new fuse.
2. CHECK DOOR MIRROR DEFOGGER POWER SUPPLY CIRCUIT I
DEF-13
DOOR MIRROR DEFOGGER LH
< COMPONENT DIAGNOSIS >
NO >> Repair or replace harness.
4.CHECK DOOR MIRROR DEFOGGER CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect IPDM E/R.
3. Check continuity between IPDM E/R connector and door mirror
LH or RH connector.
Connector Connector
Terminal Terminal Continuity
A B
IPDM E/R: Door mirror:
23 1 Yes
E120 D4
4. Check continuity between IPDM E/R and ground. LIIA2191E
A
Continuity
Connector Terminal
Ground
IPDM E/R:
23 No
E120
Is the inspection result normal?
YES >> GO TO 4.
NO >> Repair or replace harness.
5. CHECK DOOR MIRROR DEFOGGER GROUND CIRCUIT
Check continuity between door mirror LH connector D4 terminal 6
and ground.
LIIA2037E
DEF-14
DOOR MIRROR DEFOGGER LH
< COMPONENT DIAGNOSIS >
Check continuity between door mirror LH terminals 1 and 6.
A
1-6 : Continuity should exist.
Is the inspection result normal?
YES >> Check the condition of the harness and the connector. B
NO >> Replace malfunctioning door mirror LH. Refer to MIR-
13, "Door Mirror Assembly".
C
LIIA2038E
DEF
DEF-15
DOOR MIRROR DEFOGGER RH
< COMPONENT DIAGNOSIS >
DOOR MIRROR DEFOGGER RH
Description INFOID:0000000001712124
Heats the heating wire with the power supply from the rear window defogger relay to prevent the door mirror
from fogging up.
Component Function Check INFOID:0000000001712125
DEF-16
DOOR MIRROR DEFOGGER RH
< COMPONENT DIAGNOSIS >
NO >> Repair or replace harness.
4.CHECK DOOR MIRROR DEFOGGER CIRCUIT A
Connector Connector
C
Terminal Terminal Continuity
A B
IPDM E/R: Door mirror: D
23 1 Yes
E120 D107
4. Check continuity between IPDM E/R and ground. LIIA2191E
E
A
Continuity
Connector Terminal
Ground
IPDM E/R: F
23 No
E120
OK or NG
G
OK >> GO TO 4.
NG >> Repair or replace harness.
5. CHECK DOOR MIRROR DEFOGGER GROUND CIRCUIT H
Check continuity between door mirror RH connector D107 terminal 6
and ground.
I
6 - Ground : Continuity should exist.
Is the inspection result normal?
YES >> GO TO 6 J
NO >> Repair or replace harness.
K
LIIA2037E
DEF-17
DOOR MIRROR DEFOGGER RH
< COMPONENT DIAGNOSIS >
Check continuity between door mirror RH terminals 1 and 6.
LIIA2038E
DEF-18
BCM (BODY CONTROL MODULE)
< ECU DIAGNOSIS >
ECU DIAGNOSIS A
BCM (BODY CONTROL MODULE)
Reference Value INFOID:0000000001712132
B
DEF
DEF-19
BCM (BODY CONTROL MODULE)
< ECU DIAGNOSIS >
Wiring Diagram INFOID:0000000001712133
ALLWA0035GB
DEF-20
BCM (BODY CONTROL MODULE)
< ECU DIAGNOSIS >
DEF
ALLIA0220GB
DEF-21
BCM (BODY CONTROL MODULE)
< ECU DIAGNOSIS >
ALLIA0221GB
DEF-22
BCM (BODY CONTROL MODULE)
< ECU DIAGNOSIS >
DEF
ALLIA0222GB
DEF-23
BCM (BODY CONTROL MODULE)
< ECU DIAGNOSIS >
ALLIA0223GB
DEF-24
BCM (BODY CONTROL MODULE)
< ECU DIAGNOSIS >
DEF
ALLIA0286GB
DEF-25
BCM (BODY CONTROL MODULE)
< ECU DIAGNOSIS >
ALLIA0287GB
DEF-26
REAR WINDOW DEFOGGER AND DOOR MIRROR DEFOGGER DO NOT OPER-
ATE.
< SYMPTOM DIAGNOSIS >
SYMPTOM DIAGNOSIS A
REAR WINDOW DEFOGGER AND DOOR MIRROR DEFOGGER DO NOT
OPERATE.
B
Diagnosis Procedure INFOID:0000000001712134
DEF
DEF-27
REAR WINDOW DEFOGGER DOES NOT OPERATE BUT BOTH OF DOOR MIR-
ROR DEFOGGER OPERATE.
< SYMPTOM DIAGNOSIS >
REAR WINDOW DEFOGGER DOES NOT OPERATE BUT BOTH OF DOOR
MIRROR DEFOGGER OPERATE.
Diagnosis Procedure INFOID:0000000001712135
DEF-28
BOTH DOORS MIRROR DEFOGGER DON’T OPERATE BUT REAR WINDOW
DEFOGGER OPERATES
< SYMPTOM DIAGNOSIS >
BOTH DOORS MIRROR DEFOGGER DON’T OPERATE BUT REAR WIN-
A
DOW DEFOGGER OPERATES
Diagnosis Procedure INFOID:0000000001712136
B
1. CHECK INTERMITTENT INCIDENT
Check intermittent incident.
C
Refer to GI-51, "Intermittent Incident".
Is the inspection result normal?
YES >> Check the following. D
• Battery power supply circuit.
• IPDM E/R.
NO >> Repair or replace the malfunctioning parts.
E
DEF
DEF-29
DRIVER SIDE DOOR MIRROR DEFOGGER DOES NOT OPERATE.
< SYMPTOM DIAGNOSIS >
DRIVER SIDE DOOR MIRROR DEFOGGER DOES NOT OPERATE.
Diagnosis Procedure INFOID:0000000001712137
DEF-30
PASSENGER SIDE DOOR MIRROR DEFOGGER DOES NOT OPERATE.
< SYMPTOM DIAGNOSIS >
PASSENGER SIDE DOOR MIRROR DEFOGGER DOES NOT OPERATE.
A
Diagnosis Procedure INFOID:0000000001712138
DEF
DEF-31
REAR WINDOW DEFOGGER SWITCH DOES NOT LIGHT, BUT REAR WINDOW
DEFOGGER OPERATES
< SYMPTOM DIAGNOSIS >
REAR WINDOW DEFOGGER SWITCH DOES NOT LIGHT, BUT REAR WIN-
DOW DEFOGGER OPERATES
Diagnosis Procedure INFOID:0000000001712139
DEF-32
PRECAUTIONS
< PRECAUTION >
PRECAUTION A
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT B
PRE-TENSIONER" INFOID:0000000001697632
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along C
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted. D
Information necessary to service the system safely is included in the SR and SB section of this Service Man-
ual.
WARNING: E
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
F
• Improper maintenance, including incorrect removal and installation of the SR, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the SR section.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this G
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
Handling for Adhesive and Primer INFOID:0000000001697633
H
• Do not use an adhesive which is past its usable date. Shelf life of this product is limited to six months after
the date of manufacture. Carefully adhere to the expiration or manufacture date printed on the box. I
• Keep primers and adhesive in a cool, dry place. Ideally, they should be stored in a refrigerator.
• Open the seal of the primer and adhesive just before application. Discard the remainder.
• Before application, be sure to shake the primer container to stir the contents. If any floating material is found,
do not use it. J
• If any primer or adhesive contacts the skin, wipe it off with gasoline or equivalent and wash the skin with
soap.
• When using primer and adhesive, always observe the precautions in the instruction manual. K
DEF
DEF-33
REAR WINDOW DEFOGGER
< ON-VEHICLE REPAIR >
ON-VEHICLE REPAIR
REAR WINDOW DEFOGGER
Filament Check INFOID:0000000001697630
1. When measuring voltage, wrap tin foil around the top of the neg-
ative probe. Then press the foil against the wire with your finger.
SEL122R
SEL263
SEL265
REPAIR EQUIPMENT
• Conductive silver composition (DuPont No. 4817 or equivalent)
• Ruler 30 cm (11.8 in) long
DEF-34
REAR WINDOW DEFOGGER
< ON-VEHICLE REPAIR >
• Drawing pen
• Heat gun A
• Alcohol
• Cloth
REPAIRING PROCEDURE B
1. Wipe broken heat wire and its surrounding area clean with a
cloth dampened in alcohol.
2. Apply a small amount of conductive silver composition to tip of C
drawing pen.
Shake silver composition container before use.
3. Place ruler on glass along broken line. Deposit conductive silver D
composition on break with drawing pen. Slightly overlap existing
heat wire on both sides [preferably 5 mm (0.20 in)] of the break.
E
PIIA0215E
4. After repair has been completed, check repaired wire for conti- F
nuity. This check should be conducted 10 minutes after silver
composition is deposited.
Do not touch repaired area while test is being conducted. G
I
SEL012D
DEF
SEL013D
M
DEF-35